Selection Guide to 40G QSFP+ Transceiver

Selection Guide to 40G QSFP+ Transceiver


With the rapid growth of global regional and local fiber communication network, 40G Ethernet standard has already been a popular choice. In order to implement 40G Ethernet network, 40GBASE fiber optic transceivers, a high-performance and flexible component, are developed and widely used. 40GBASE optical transceivers mainly include CFP transceiver and QSFP+ transceiver (quad small form-factor pluggable plus). QSFP+ transceiver is the most commonly used module type in 40G Ethernet networks, so today we will mainly discuss on how to choose the 40GBASE QSFP+ transceiver. As 40GBASE QSFP+ transceivers are used to interface networking hardware to a fiber optic cable, the choice of them depends on many factors, like the media system, the connector type, transmission distance, wavelength, etc. Thus we should consider all these factors comprehensively before we choose the 40G QSFP transceivers.

Transport Media
First, choose the right QSFP+ transceiver according to the transport media, namely the fiber type. According to the IEEE 802.3ba 40G Ethernet standard, there are three types of transceivers used respectively in three types of transport media: single mode fiber (SMF), multimode fiber (MMF) and copper.

SMF: 40GBASE-LR4 QSFP+ transceiver reaches 40 Gb/s Ethernet over four wavelengths carried by a singlemode fiber optic cable.
MMF: 40GBASE-SR4 QSFP+ transceiver reaches 40 Gb/s Ethernet over four short-range multimode fiber optic cables.
Copper: 40GBASE-CR4 QSFP+ transceiver reaches 40 Gb/s Ethernet over four short-range twinaxial copper cables bundled as a single cable over a standard pair of G.652 single-mode fiber.
Connector Type
Choose the right transceivers which are compliant with the proper connectors. The connectors widely-used mainly have following types: duplex LC connector and MPO connector (or MTP connector, a high-performance MPO connector). For instance, Cisco QSFP-40G-LR4 40GBASE-LR4 QSFP+ transceiver is compliant with the duplex LC connector, while Cisco QSFP-40G-SR4-S 40GBASE-SR4 QSFP+ transceiver and HP JG709A 40GBASE-CSR4 QSFP+ transceiver are compliant with the MPO connector. The picture belows shows duplex LC connector and MPO (MTP) connector.

Wavelength
The wavelength that QSFP+ transceivers operate on is another important factor in choosing the proper QSFP+ transceiver. For instance, QSFP-40G-LX4 QSFP+ transceiver converts 4 inputs channels (1271nm, 1291nm,1311nm, 1331nm) of 10Gb/s electrical data to 4 CWDM optical signals, and multiplexes them into a single channel for 40Gb/s optical transmission. While some other QSFP+ transceivers like QSFP-40GBD-SR QSFP+ transceiver consists of two 20-Gbps transmit and receive channels in the 832-918 nm wavelength range.

Transmission Distance
When choosing the most appropriate QSFP+ transceiver, you also need to consider the transmission distance and the reach requirements you need in reality. The most common types of QSFP+ transceiver divided by its transmission distance can reach up to 100m, 150m, 300m, 400m, 1km, 2km, 10km, 40km, etc. For example, 40GBASE-LR4 QSFP+ transceiver can reach up to 10km, suitable for long reach transmission; 40GBASE-LX4 QSFP+ transceiver is designed to supports link lengths of 100m and 150m respectively on laser-optimized OM3 and OM4 multimode fiber cables. And some others, like 40GBASE-ER4 QSFP+ transceiver which supports link lengths of up to 40km on single-mode fiber cable is designed to use in long distance transmission.

Cost
The total cost on QSFP+ transceivers is a large sum of money. Cost is one aspect that should be considered in 40G QSFP+ transceiver selection. To a limit buget, you have to figure out the best choice. Third party transceivers that are compatible with a variety types of switches can be found in today’s market. They have the same performances that the original brand transceivers have, but cost less money. Selecting compatible QSFP+ transceivers has become the choice of many data centers, and it is necessary to select them from a company that assures 100% compatibility and interoperability.

Summary
There are various types of 40G QSFP transceivers including single-mode and multi-mode with different channels and wavelengths. In order to achieve a fast and successful selection of the 40G QSFP transceivers, you should consider all the above-mentioned factors comprehensively. Then you can make an appropriate and cost-effective choice.

FIBER-MART(Fiber-MART.COM), based in HongKong & U.S., a worldwide leading supplier in fiber optic network, fttx, fiber cabling & connectivity, fiber testing, fiber splicing, fiber polishing & integrated network solutions. Devoting on the research & development, design, manufacture, and fiber connectivity network solutions for carriers, ISPs, content providers and networks, has always engaged in high-performance and innovation.

评论

发表评论

此博客中的热门博文

Common Armored Fiber Optic Cables

  Armored fiber optic cables are often installed in a network for added mechanical protection, as they have extra reinforcing in the cable housing to prevent damage. Two types of armored fiber optic cables exist: interlocking and corrugated. Interlocking armor is an aluminum armor that is helically wrapped around the cable and found in indoor and indoor/outdoor cables. It offers ruggedness and superior crush resistance. Corrugated armor is a coated steel tape folded around the cable longitudinally. It is found in outdoor cables and offers extra mechanical and rodent protection.   The Structure of an Armored Fiber Optic Cable In basic armored fiber cable designs, the outer sleeve provides protection against wind, solvents, and abrasion. This outer sleeve is usually made of plastic such as polyethylene. The next layer between the sleeve and the inner jacket is an armoring layer of materials that are difficult to cut, chew, or bu
阅读全文

what the Differences Between FBT Splitter and PLC Splitter

  In FTTx and PON architectures, optical splitter plays an increasingly significant role to create a variety of point-to-multipoint fiber optic networks. But do you know what is a fiber optic splitter? In fact, a fiber optic splitter is a passive optical device that can split or separate an incident light beam into two or more light beams. Basically, there are two types of fiber splitter classified by their working principle: fused biconical taper splitter (FBT splitter) and planar lightwave circuit splitter (PLC splitter). You may have one question: what’s the difference between them and shall we use FBT or PLC splitter?   What Is FBT Splitter? FBT splitter is based on a traditional technology to weld several fiber together from side of the fiber. Fibers are aligned by heating for a specific location and length. Because the fused fibers are very fragile, they are protected by a glass tube made of epoxy and silica powder. And then a stainless steel tube covers the inner glass tu
阅读全文

Introduction of Optical Fiber Couplers and How Do They Work?

 What are optical fiber couplers? A fiber optic coupler can be defined as an optical component used with one or more input fibers and several output fibers in fiber optic systems. A coupler essentially puts two or more cores of fibers together to connect. The simple coupler is the fused fiber 2x2 coupler. Couplers are used as multiplexers that are resistant to certain wavelengths. A fiber output depends on the wavelength of light and the frequency of polarization. The fiber refractive index also plays a significant role in the performance. Let’s checkout how do optic couplers work to understand this better. How do fiber optic couplers work? Either fiber optic couplers separate optical signals into multiple paths or combine multiple signals in one direction. Optical signals are more complicated than electrical signals, making it more difficult to design optical couplers than their electrical copy. Unlike electrical currents, the optical signal consists of a stream of signal carriers, in
阅读全文