FTTH/FTTx Pass 1310nm & 1490nm Reflect 1550nm FWDM Filter WDM

FTTH/FTTx Pass 1310nm & 1490nm Reflect 1550nm FWDM Filter WDM



FM SKU#:SKU10065J
Model#:FM-FWDM-T3149/R55
MFG PART#:

FTTH/FTTx Pass 1310nm & 1490nm Reflect 1550nm FWDM Filter WDM

FTTX Filter WDM module extensively used in EDFA, Raman amplifiers, WDM networks and fiber optics instrumentation is based on Thin Film Filter (TFF) technology. The device combines or separates light at different wavelengths in a wide wavelength range. It can expand the capacity of a single fiber to achieve bidirectional communication, so that widely used in optical network upgrade and expansion, or introduce new comprehensive business etc.
Fiber-MART.Com provides filter-based wavelength division multiplexing (WDM) filter devices that are customized to the particular wavelength bands for your special applications. As you might know, GEPON system itself works on 1310/1490, so CATV signal here is delivered over same fiber using 1550nm, and FWDM is a place where all this get's "mixed".

Item Details

  • Pass(Transmission)Channel: 1310nm and 1490nm
  • Reflection Channel: 1550nm
  • High Isolation, Reliability and channel isolation
  • Low Insertion loss and excellent environmental reliability
  • RoHS Compliant

    • Package Type

    Steel Tube package for 250um bare fiber and 900um fiber
    ABS box for 900um, 2.0mm and 3.0mm fiber
    Note: 250um bare fiber is too finne to be equiped with connector
    RX:Reflection wavelength range(nm)
    T31/R55TX:1310nm
    RX:1550nm
    T55/R31TX:1550nm
    RX:1310nm
    T31/R4955TX:1310nm
    RX:1490&1550nm
    T49/R3155TX:1490nm
    RX:1310&1550nm
    T55/R3149TX:1550nm
    RX:1310&1490nm
    T4955/R31TX:1490&1550nm
    RX:1310nm
    T3149/R55TX:1310&1490nm
    RX:1550nm


    About FIBER-MART(Fiber-MART.COM)


    FIBER-MART(Fiber-MART.COM), based in HongKong & U.S., belongs to SUNMA Group, a worldwide leading supplier in fiber optic network, fttx, fiber cabling & connectivity, fiber testing, fiber splicing, fiber polishing & integrated network solutions. Devoting on the research & development, design, manufacture, and fiber connectivity network solutions for carriers, ISPs, content providers and networks, has always engaged in high-performance and innovation.

    Our goal is to create value for worldwide customers continuously with high-quality products and excellent services in the field of optical communication.

    评论

    发表评论

    此博客中的热门博文

    Common Armored Fiber Optic Cables

      Armored fiber optic cables are often installed in a network for added mechanical protection, as they have extra reinforcing in the cable housing to prevent damage. Two types of armored fiber optic cables exist: interlocking and corrugated. Interlocking armor is an aluminum armor that is helically wrapped around the cable and found in indoor and indoor/outdoor cables. It offers ruggedness and superior crush resistance. Corrugated armor is a coated steel tape folded around the cable longitudinally. It is found in outdoor cables and offers extra mechanical and rodent protection.   The Structure of an Armored Fiber Optic Cable In basic armored fiber cable designs, the outer sleeve provides protection against wind, solvents, and abrasion. This outer sleeve is usually made of plastic such as polyethylene. The next layer between the sleeve and the inner jacket is an armoring layer of materials that are difficult to cut, chew, or bu
    阅读全文

    what the Differences Between FBT Splitter and PLC Splitter

      In FTTx and PON architectures, optical splitter plays an increasingly significant role to create a variety of point-to-multipoint fiber optic networks. But do you know what is a fiber optic splitter? In fact, a fiber optic splitter is a passive optical device that can split or separate an incident light beam into two or more light beams. Basically, there are two types of fiber splitter classified by their working principle: fused biconical taper splitter (FBT splitter) and planar lightwave circuit splitter (PLC splitter). You may have one question: what’s the difference between them and shall we use FBT or PLC splitter?   What Is FBT Splitter? FBT splitter is based on a traditional technology to weld several fiber together from side of the fiber. Fibers are aligned by heating for a specific location and length. Because the fused fibers are very fragile, they are protected by a glass tube made of epoxy and silica powder. And then a stainless steel tube covers the inner glass tu
    阅读全文

    Introduction of Optical Fiber Couplers and How Do They Work?

     What are optical fiber couplers? A fiber optic coupler can be defined as an optical component used with one or more input fibers and several output fibers in fiber optic systems. A coupler essentially puts two or more cores of fibers together to connect. The simple coupler is the fused fiber 2x2 coupler. Couplers are used as multiplexers that are resistant to certain wavelengths. A fiber output depends on the wavelength of light and the frequency of polarization. The fiber refractive index also plays a significant role in the performance. Let’s checkout how do optic couplers work to understand this better. How do fiber optic couplers work? Either fiber optic couplers separate optical signals into multiple paths or combine multiple signals in one direction. Optical signals are more complicated than electrical signals, making it more difficult to design optical couplers than their electrical copy. Unlike electrical currents, the optical signal consists of a stream of signal carriers, in
    阅读全文