Corning Fiber 50/125μm Multimode Simplex Tight Buffer Round LSZH Indoor Fiber Optic Cable

Corning Fiber 50/125μm Multimode Simplex Tight Buffer Round LSZH Indoor Fiber Optic Cable


FM SKU#:SKU00607E2
Model#:SFC-A1CL
MFG PART#:

This is a 50/125/900µm fiber optic indoor cable, could be used as patch cords and pigtails, could be a interconnection of fiber optic equipment.

The fiber is coated with 250µm soft plastic, and then covered with a 900µm tight buffer thick layer of hard plastic, which add some fiber protection.
The Kevlar yarn material ensure a good performance of tensile strength. And the Flame retardant outer jacket could be used in LSZH environment.The cable diameter is 2.0mm,3.0mm optional.

Item Details

  • Fiber Count: 1 Fiber

  • Fiber Type: 50/125μm Multimode Corning Fiber

  • Out Jacket: LSZH

  • Cable DIA.: 2.0mm, 3.0mm Optional

  • Fiber Color: Orange

    • Cable Structure

    Features
  • Soft, flexible and easy to do stripping, splicing and cabling
  • Good mechanical and environmental characteristics
  • The mechanical and physical characteristics of the outer jacket meet the requirement of relevant standards
  • Kevlar yarn material ensure a good performance of tensile strength
  • 900µm tight buffer protect the fiber well
    		• Application
  • Single Core Round Tight Buffered Indoor Fiber Optical Cable Applications
  • Used in patch cords and pigtails
  • Interconnection of fiber optic equipment


    • Tight buffer DiameterOut Sheath
    Diameter    		WeightMinimum Allowable Tensile Strength
    (N)    		Minimum Allowable Crush Load
    （N/100mm)    		Minimum Bending Radius
    (MM)    		Storage
    Temperature
    （MM)（MM)（KG)short termlong termshort termlong termshort termlong term（℃）
    0.61.63.51508050010020D10D-20+60
    0.61.841508050010020D10D-20+60
    0.9251508050010020D10D-20+60
    0.92.461508050010020D10D-20+60
    0.92.871508050010020D10D-20+60
    0.9381508050010020D10D-20+60


    G.65250/125µm62.5/125µm
    Attenuation
    (+20°C) (dB/km)    		@850nm≤3.0≤3.0
    @1300nm≤1.0≤1.0
    @1310nm≤0.36
    @1550nm≤0.22
    Bandwidth (Class A) (MHz·km)@850nm≥600≥200
    @1300nm≥1200≥600
    Numerical Aperture0.200±0.015NA0.275±0.015NA
    Cable Cut-off Wavelength λcc (nm)

    About FIBER-MART(Fiber-MART.COM)


    FIBER-MART(Fiber-MART.COM), based in HongKong & U.S., belongs to SUNMA Group, a worldwide leading supplier in fiber optic network, fttx, fiber cabling & connectivity, fiber testing, fiber splicing, fiber polishing & integrated network solutions. Devoting on the research & development, design, manufacture, and fiber connectivity network solutions for carriers, ISPs, content providers and networks, has always engaged in high-performance and innovation.

    Our goal is to create value for worldwide customers continuously with high-quality products and excellent services in the field of optical communication.

    评论

    发表评论

    此博客中的热门博文

    Common Armored Fiber Optic Cables

      Armored fiber optic cables are often installed in a network for added mechanical protection, as they have extra reinforcing in the cable housing to prevent damage. Two types of armored fiber optic cables exist: interlocking and corrugated. Interlocking armor is an aluminum armor that is helically wrapped around the cable and found in indoor and indoor/outdoor cables. It offers ruggedness and superior crush resistance. Corrugated armor is a coated steel tape folded around the cable longitudinally. It is found in outdoor cables and offers extra mechanical and rodent protection.   The Structure of an Armored Fiber Optic Cable In basic armored fiber cable designs, the outer sleeve provides protection against wind, solvents, and abrasion. This outer sleeve is usually made of plastic such as polyethylene. The next layer between the sleeve and the inner jacket is an armoring layer of materials that are difficult to cut, chew, or bu
    阅读全文

    what the Differences Between FBT Splitter and PLC Splitter

      In FTTx and PON architectures, optical splitter plays an increasingly significant role to create a variety of point-to-multipoint fiber optic networks. But do you know what is a fiber optic splitter? In fact, a fiber optic splitter is a passive optical device that can split or separate an incident light beam into two or more light beams. Basically, there are two types of fiber splitter classified by their working principle: fused biconical taper splitter (FBT splitter) and planar lightwave circuit splitter (PLC splitter). You may have one question: what’s the difference between them and shall we use FBT or PLC splitter?   What Is FBT Splitter? FBT splitter is based on a traditional technology to weld several fiber together from side of the fiber. Fibers are aligned by heating for a specific location and length. Because the fused fibers are very fragile, they are protected by a glass tube made of epoxy and silica powder. And then a stainless steel tube covers the inner glass tu
    阅读全文

    Introduction of Optical Fiber Couplers and How Do They Work?

     What are optical fiber couplers? A fiber optic coupler can be defined as an optical component used with one or more input fibers and several output fibers in fiber optic systems. A coupler essentially puts two or more cores of fibers together to connect. The simple coupler is the fused fiber 2x2 coupler. Couplers are used as multiplexers that are resistant to certain wavelengths. A fiber output depends on the wavelength of light and the frequency of polarization. The fiber refractive index also plays a significant role in the performance. Let’s checkout how do optic couplers work to understand this better. How do fiber optic couplers work? Either fiber optic couplers separate optical signals into multiple paths or combine multiple signals in one direction. Optical signals are more complicated than electrical signals, making it more difficult to design optical couplers than their electrical copy. Unlike electrical currents, the optical signal consists of a stream of signal carriers, in
    阅读全文