Fiber-mart.com supply Bare Fiber Splitter

Planar lightwave circuit (PLC) splitter is a type of optical power management device that is fabricated using silica optical waveguide technology to distribute optical signals from Central Office (CO) to multiple premise locations.

Bare fiber splitter is a kind of ODN product suitable for PON networks that can be installed in the pigtail cassette, test instrument and WDM system, which minimizes the space occupation. It is relatively fragile on fiber protection and need a complete protection design on carrying box body and device.
Product Details
Package StyleSteel Tube, Bare FiberConfiguration Type1/2XN
Fiber TypeSinglemode G.657A1Connector TypeNone
Fiber Diameter250 mPigtail Length1.5m
Operating Bandwidth1260~1650nmOperating/Storage Temperature-40~85C

Product Highlights

  • 1/2XN PLC splitter, uniform distribution of optical signal
  • Small size, with the splitter type of steel tube, bare fiber
  • Ideal for EPON, GPON, FTTH/FTTX network
Perfect Details of 1/2XN Bare Fiber PLC Splitter
High Environmental Stability
Low insertion loss, low polarization dependent loss, low back reflection, and good uniformity.
Excellent Quality Chips
Loss of light is not sensitive for wavelength, and it can meet the transmission needs of different wavelengths.
Compact Structure
Small size, it can be directly installed in a variety of transfer box and just take up little space.
Exquisite Packaging
The design and packaging is exquisite to ensure the product in good condition.
Simple and Easy Connection
Bare PLC splitter can be easily installed in fiber splice closure or joint box for space saving.

A Variety of Applications of Bare PLC Splitter
Important passive component in PON network
Widely used in CATV, FTTH/FTTX, PON network, DWDM and CWDM systems, test equipment, LAN/MAN/WAN network, and more.

Technical Parameter
Parameter1X21X41X81X161X321X64
Fiber TypeG.657AG.657AG.657AG.657AG.657AG.657A
Operating Wavelength (nm)1260~16501260~16501260~16501260~16501260~16501260~1650
Typical Insertion Loss (dB)3.76.810.013.016.019.5
Max Insertion Loss (dB)4.07.210.513.516.921.0
Max Loss Uniformity (dB)0.40.60.81.21.52.5
Min Return Loss (dB)505050505050
Max PDL (dB)0.20.20.30.30.30.4
Min Directivity (dB)555555555555
Max Wavelength Dependent Loss (dB)0.30.30.30.50.50.8
Max Temperature Dependent Loss (-40~+85C)0.50.50.50.80.81.0
Operating Temperature (C)-40~85-40~85-40~85-40~85-40~85-40~85
Storage Temperature (C)-40~85-40~85-40~85-40~85-40~85-40~85

地点: 中国广东省

评论

发表评论

此博客中的热门博文

Common Armored Fiber Optic Cables

  Armored fiber optic cables are often installed in a network for added mechanical protection, as they have extra reinforcing in the cable housing to prevent damage. Two types of armored fiber optic cables exist: interlocking and corrugated. Interlocking armor is an aluminum armor that is helically wrapped around the cable and found in indoor and indoor/outdoor cables. It offers ruggedness and superior crush resistance. Corrugated armor is a coated steel tape folded around the cable longitudinally. It is found in outdoor cables and offers extra mechanical and rodent protection.   The Structure of an Armored Fiber Optic Cable In basic armored fiber cable designs, the outer sleeve provides protection against wind, solvents, and abrasion. This outer sleeve is usually made of plastic such as polyethylene. The next layer between the sleeve and the inner jacket is an armoring layer of materials that are difficult to cut, chew, or bu
阅读全文

what the Differences Between FBT Splitter and PLC Splitter

  In FTTx and PON architectures, optical splitter plays an increasingly significant role to create a variety of point-to-multipoint fiber optic networks. But do you know what is a fiber optic splitter? In fact, a fiber optic splitter is a passive optical device that can split or separate an incident light beam into two or more light beams. Basically, there are two types of fiber splitter classified by their working principle: fused biconical taper splitter (FBT splitter) and planar lightwave circuit splitter (PLC splitter). You may have one question: what’s the difference between them and shall we use FBT or PLC splitter?   What Is FBT Splitter? FBT splitter is based on a traditional technology to weld several fiber together from side of the fiber. Fibers are aligned by heating for a specific location and length. Because the fused fibers are very fragile, they are protected by a glass tube made of epoxy and silica powder. And then a stainless steel tube covers the inner glass tu
阅读全文

Introduction of Optical Fiber Couplers and How Do They Work?

 What are optical fiber couplers? A fiber optic coupler can be defined as an optical component used with one or more input fibers and several output fibers in fiber optic systems. A coupler essentially puts two or more cores of fibers together to connect. The simple coupler is the fused fiber 2x2 coupler. Couplers are used as multiplexers that are resistant to certain wavelengths. A fiber output depends on the wavelength of light and the frequency of polarization. The fiber refractive index also plays a significant role in the performance. Let’s checkout how do optic couplers work to understand this better. How do fiber optic couplers work? Either fiber optic couplers separate optical signals into multiple paths or combine multiple signals in one direction. Optical signals are more complicated than electrical signals, making it more difficult to design optical couplers than their electrical copy. Unlike electrical currents, the optical signal consists of a stream of signal carriers, in
阅读全文