24-Port 10/100M POE Switch with 2-Port Giga Combo SFP Slot

24-Port 10/100M POE Switch with 2-Port Giga Combo SFP Slot


FM SKU#:SKU00038L1
Model#:FM-POE3624M
link: http://www.fiber-mart.com/24port-10100m-poe-switch-with-2port-giga-combo-sfp-slot-p-2797.html

24-Port 10/100M POE Switch with 2-Port Giga Combo SFP Slot


Modern business networks are used for increasingly diverse applications – traditional data streams, VoIP voice traffic, video output from digital security cameras and remote control devices to name a few. The range of devices attached to today’s converged network often need to be supported not just in terms of data –equipment such as VoIP IP telephones and Wireless Access Points frequently need to be powered in physical locations where mains power is not available or difficult to deliver. Providing power to such devices via an Ethernet UTP cable is an elegant and easy to implement solution.
The 24+2-Port 10/100M PoE Switch is an unmanaged 10/100Mbps Ethernet PoE switch designed to enhance workgroup performance while providing a high level of flexibility. It provides 24 10/100Mbps ports and 24 IEEE802.3af Power over Ethernet (PoE) ports for workstation, plus 2 copper Gigabit ports and 2 Gigabit SFP port for workgroup and departments.

Key Features

  • IEEE802.3af Power over Ethernet (PoE) Standard Compliant.
  • 24 x 10/100Mbps Auto-Negotiation and Auto-MDIX Fast Ethernet RJ45 Ports.
  • Built-in 24 PoE Port. ( Port 1 ~ Port 24).
  • Supports PoE Power Maximum 15.4 watts for each PoE port.
  • Supports POE Power Device(PD) classification identify.
  • Store and Forward Switching Method.
  • Built-in 2.75Mb RAM Data Buffer and 4K entries MAC Address Table.
  • IEEE802.3x Flow Control for Full-Duplex: Back Pressure Flow Control for Half-Duplex Mode.
  • Supports 802.1Q VLAN, Port-Based IEEE802.1p QoS.
  • Supports flexible 3 Trunking Groups. (Port 0-3, Port 4-7, Gigabit Port 1).
  • 1000Mbps Support based on Type of SFP, LC (option).
  • No Special Networking Cable Required.
  • Plug and Play.
  • IEEE802.3at Standard Options.

    • Specifications

    Product SpecificationsNetwork Protocol and Standard
    24+2-Port 10/100M PoE Switch24-port 10/100PoE switch with 2 1000 Base _ T Port + 2 Giga SFP Port (GS)IEEE Standard802.3 10M Ethernet
    MAC Address Table4KSupports802.3u 100M Fast Ethernet
    Transmission MethodStore-and-forward802.3x Flow control
    Forwarding Rate14,880pps 10M /148,880pps 100M /1,488,0001000M802.3af 15.4W Power over Ethernet
    VLANsSupport802.1Q VLAN
    Built-in RAM2.75Mb802.1p QoS
    Support packet length1536 Bytes5 port state for Spanning Tree
    Flexible 3 trunking groups
    Interface OptionsPoE Power Out & Power Input
    Interface Options10Base-t/100Base-TPoE Power Out48VDC 15.4W Max per Port.
    RJ-45 x 241000Base-TMax PoE output Powe: 340W
    RJ-45 X 21000Base-T support based on SFP/LCPoE pin-out: Pin 3/6 for + , Pin 1 /2 are -
    SFP X 2(24+2-Port 10/100M PoE Switch only)Power Input100 ~ 240V/AC, 50 ~ 60 Hz
    LED IndicatorsPer Port: 10/100, Link /ACT
    PoE Act /StatusPower Consumption350 watts ( Max)
    Per Unit: Power
    Dimensions:430mm x 266mm x 66.4mmHumidity10% ~ 90% (non-condensing)
    16.93in x 10.47 in x 2.61in
    Operating Temperature0°C ~ 40 °C (32° F ~ 104 ° F)Warranty2 Years
    CertificationFCC /CE /RoHS

    Ordering Information

    P/NDescription-XX
    FM-POE3624-XX24-Port 10/100M POE SwitchT:IEEE802.3at1：15.4W
    F:IEEE802.3af3: 30W
    N:Non－standard
    FM-POE3624M-XX24-Port 10/100M Managed POE Switch with 2-Port Giga Combo SFP SlotT:IEEE802.3at1：15.4W
    F:IEEE802.3af3: 30W
    N:Non－standard

    Product SpecificationsNetwork Protocol and Standard
    24+2-Port 10/100M PoE Switch24-port 10/100PoE switch with 2 1000 Base _ T Port + 2 Giga SFP Port (GS)IEEE Standard802.3 10M Ethernet
    MAC Address Table4KSupports802.3u 100M Fast Ethernet
    Transmission MethodStore-and-forward802.3x Flow control
    Forwarding Rate14,880pps 10M /148,880pps 100M /1,488,0001000M802.3af 15.4W Power over Ethernet
    VLANsSupport802.1Q VLAN
    Built-in RAM2.75Mb802.1p QoS
    Support packet length1536 Bytes5 port state for Spanning Tree
    Flexible 3 trunking groups
    Interface OptionsPoE Power Out & Power Input
    Interface Options10Base-t/100Base-TPoE Power Out48VDC 15.4W Max per Port.
    RJ-45 x 241000Base-TMax PoE output Powe: 340W
    RJ-45 X 21000Base-T support based on SFP/LCPoE pin-out: Pin 3/6 for + , Pin 1 /2 are -
    SFP X 2(24+2-Port 10/100M PoE Switch only)Power Input100 ~ 240V/AC, 50 ~ 60 Hz
    LED IndicatorsPer Port: 10/100, Link /ACT
    PoE Act /StatusPower Consumption350 watts ( Max)
    Per Unit: Power
    Dimensions:430mm x 266mm x 66.4mmHumidity10% ~ 90% (non-condensing)
    16.93in x 10.47 in x 2.61in
    Operating Temperature0°C ~ 40 °C (32° F ~ 104 ° F)Warranty2 Years
    CertificationFCC /CE /RoHS


    评论

    发表评论

    此博客中的热门博文

    Common Armored Fiber Optic Cables

      Armored fiber optic cables are often installed in a network for added mechanical protection, as they have extra reinforcing in the cable housing to prevent damage. Two types of armored fiber optic cables exist: interlocking and corrugated. Interlocking armor is an aluminum armor that is helically wrapped around the cable and found in indoor and indoor/outdoor cables. It offers ruggedness and superior crush resistance. Corrugated armor is a coated steel tape folded around the cable longitudinally. It is found in outdoor cables and offers extra mechanical and rodent protection.   The Structure of an Armored Fiber Optic Cable In basic armored fiber cable designs, the outer sleeve provides protection against wind, solvents, and abrasion. This outer sleeve is usually made of plastic such as polyethylene. The next layer between the sleeve and the inner jacket is an armoring layer of materials that are difficult to cut, chew, or bu
    阅读全文

    what the Differences Between FBT Splitter and PLC Splitter

      In FTTx and PON architectures, optical splitter plays an increasingly significant role to create a variety of point-to-multipoint fiber optic networks. But do you know what is a fiber optic splitter? In fact, a fiber optic splitter is a passive optical device that can split or separate an incident light beam into two or more light beams. Basically, there are two types of fiber splitter classified by their working principle: fused biconical taper splitter (FBT splitter) and planar lightwave circuit splitter (PLC splitter). You may have one question: what’s the difference between them and shall we use FBT or PLC splitter?   What Is FBT Splitter? FBT splitter is based on a traditional technology to weld several fiber together from side of the fiber. Fibers are aligned by heating for a specific location and length. Because the fused fibers are very fragile, they are protected by a glass tube made of epoxy and silica powder. And then a stainless steel tube covers the inner glass tu
    阅读全文

    Introduction of Optical Fiber Couplers and How Do They Work?

     What are optical fiber couplers? A fiber optic coupler can be defined as an optical component used with one or more input fibers and several output fibers in fiber optic systems. A coupler essentially puts two or more cores of fibers together to connect. The simple coupler is the fused fiber 2x2 coupler. Couplers are used as multiplexers that are resistant to certain wavelengths. A fiber output depends on the wavelength of light and the frequency of polarization. The fiber refractive index also plays a significant role in the performance. Let’s checkout how do optic couplers work to understand this better. How do fiber optic couplers work? Either fiber optic couplers separate optical signals into multiple paths or combine multiple signals in one direction. Optical signals are more complicated than electrical signals, making it more difficult to design optical couplers than their electrical copy. Unlike electrical currents, the optical signal consists of a stream of signal carriers, in
    阅读全文