how to choose Mini Module Fiber Splitter

Blockless Fiber PLC Splitter, Singlemode, 900μm Fiber, SC/LC/FC/ST, UPC/APC Connector
Planar lightwave circuit (PLC) splitter is a type of optical power management device that is fabricated using silica optical waveguide technology to distribute optical signals from Central Office (CO) to multiple premise locations.

Blockless PLC splitter has stronger fiber protection than bare fiber splitter, which is a miniaturization result of cassette splitter. It's mainly used for various connection and distribution boxes or network cabinets.
FeaturesApplication
Blockless PLC Splitter,  SC/LC/FC/ST, UPC/APC ConnectorOptical Signal Distribution
900μm ITU G.657A1 for fiber input/outputData Communications
Low insertion lossLan and CATV System
Low polarization dependent loss (PDL)FTTX Deployment
Operating bandwidth: 1260 - 1650nmFTTH Network
Compact design, suitable for installation in optical equipmentsPassive Optical Networks (PON)
Wide Operating Temperature: -40 - 85°C, support industry standard applicationsMeasuring System and Laser System
High reliability and stability, Telecordia GR-1221/1209 compliantDWDM and CWDM Systems
Telcordia 1209 & 1221 Test Results
Name of the test
Condition
Duration
Temperature- Humidity aging
85°C and 85%RH
7 days
Vibration
10 - 55Hz, 1.52mm double amplitude, in three axes
1 hour
Component Impact
Test Impact of 500g (mass ≤ 0.125kg), 1ms , half sine pulse
2 impacts
Temperature Cycling Test
-40 - 70°C, Ramp rate: 1°C/min, Dwell time > 15min
10 cycles
Temperature- Humidity cycling
-40 - 85°C , between 10°C and 23°C - 85%RH, at 85°C - 20%RH,
between °C and 85°C - maintain a linear change in RH,
below 10°C - uncontrolled RH
14 days
Water Immersion
43 ± 2°C , PH 5.5 ± 0.5
7 days
Fiber Side Pull test
0.23 kg load, 90° angle , 2 directions
5 seconds
Fiber Side Pull test
0.45 Kg load for Single Input Fiber, 1.5 Kg load for 8 Fiber Ribbon Outputs
5 seconds
Compact design, suitable for installation in outdoor fiber distribution box


The blockless splitter features small size, which is an intermediate choice between volume miniaturization and reliable fiber protection. It is suitable for installation in your system design and manufacturing. Many of our OEM customers in the FTTH, FTTX, PON, GOPN get the blockless splitters together with FS-FDB-16 outdoor fiber distribution box. Contact with sales@fiber-mart.com for complete application.

Fiber-MART.COM provides whole series of 1×N and 2×N splitter products that are tailored for specific applications
Standard configurations include 1×4, 1×8, 1×16, 1×32 and 1×64 configurations, as well as custom 2xN configurations.
We offer them as plain devices with or without connectors but as well packaged according to your specific needs in 1RU 19” chassis, standard LGX cassettes, splice pigtailed ABS modules, etc.
Contact sales@fiber-mart.com to make PLC splitters in your special needs.

Make to Order
PLC
Port Configutation
Package Style
Fiber Diameter
(Input/Output)
Connector
(Input/Output)
Pigtail Length
PLC=PLC Splitter
102=1×2
ST=Steel tube, bare fiber
25=250μm
NO=None
15=1.5m

104=1×4
MM=Mini module
90=900μm
SCA=SC/APC
20=2.0m

108=1×8
FO=With fan-out
20=2.0mm
SCU=SC/UPC
30=3.0m

116=1×16
ABS=Pigtailed ABS box
30=3.0mm
LCA=LC/APC
XX=Customized

132=1×32
MP=Mini plug-in type

LCU=LC/UPC


164=1×64
LGX=Standard LGX

FCA=FC/APC


202=2×2
TR=Mounted on a Fiber Splice Tray

FCU=FC/UPC


204=2×4
1U=1U 19” rack mount chassis

STA=ST/APC


208=2×8


STU=ST/UPC


216=2×16


X=Customized


232=2×32





264=2×64




Notes for above:
1. When package style is ST, fiber diameter could be only 25=250um, connector could be only NO=none.
2. When package style is MM & FO, fiber diameter could be only 900um.
3. When package style is AB, fiber diameter could be 90=900um, 20=2.0mm, 30=3.00mm for optional.
4. When package style is MP, LGX, TR and 1U, "fiber diameter for input/output" & "pigtail length" could be left out, as the specific product would be made according to its configuration.
----------------------------------------------------------------------------------------------------------------------------------------------------------
About FIBER-MART(Fiber-Mart.COM)

FIBER-MART(Fiber-Mart.com), based in HongKong & U.S., belongs to SUNMA Group, a worldwide leading 

supplier in fiber optic network, fttx, fiber cabling & connectivity, fiber testing, fiber splicing, fiber polishing, 

fiber blowing & integrated network solutions. devoting on the research & development, design, manufacture, 

and fiber connectivity network solutions for carriers, ISPs, content providers and networks, has always 

engaged in high-performance and innovation.

Our goal is to create value for our customers continuously with high-quality products and excellent services 

in the field of optical communication.
地点: 中国广东省深圳市

评论

发表评论

此博客中的热门博文

Common Armored Fiber Optic Cables

  Armored fiber optic cables are often installed in a network for added mechanical protection, as they have extra reinforcing in the cable housing to prevent damage. Two types of armored fiber optic cables exist: interlocking and corrugated. Interlocking armor is an aluminum armor that is helically wrapped around the cable and found in indoor and indoor/outdoor cables. It offers ruggedness and superior crush resistance. Corrugated armor is a coated steel tape folded around the cable longitudinally. It is found in outdoor cables and offers extra mechanical and rodent protection.   The Structure of an Armored Fiber Optic Cable In basic armored fiber cable designs, the outer sleeve provides protection against wind, solvents, and abrasion. This outer sleeve is usually made of plastic such as polyethylene. The next layer between the sleeve and the inner jacket is an armoring layer of materials that are difficult to cut, chew, or bu
阅读全文

what the Differences Between FBT Splitter and PLC Splitter

  In FTTx and PON architectures, optical splitter plays an increasingly significant role to create a variety of point-to-multipoint fiber optic networks. But do you know what is a fiber optic splitter? In fact, a fiber optic splitter is a passive optical device that can split or separate an incident light beam into two or more light beams. Basically, there are two types of fiber splitter classified by their working principle: fused biconical taper splitter (FBT splitter) and planar lightwave circuit splitter (PLC splitter). You may have one question: what’s the difference between them and shall we use FBT or PLC splitter?   What Is FBT Splitter? FBT splitter is based on a traditional technology to weld several fiber together from side of the fiber. Fibers are aligned by heating for a specific location and length. Because the fused fibers are very fragile, they are protected by a glass tube made of epoxy and silica powder. And then a stainless steel tube covers the inner glass tu
阅读全文

Introduction of Optical Fiber Couplers and How Do They Work?

 What are optical fiber couplers? A fiber optic coupler can be defined as an optical component used with one or more input fibers and several output fibers in fiber optic systems. A coupler essentially puts two or more cores of fibers together to connect. The simple coupler is the fused fiber 2x2 coupler. Couplers are used as multiplexers that are resistant to certain wavelengths. A fiber output depends on the wavelength of light and the frequency of polarization. The fiber refractive index also plays a significant role in the performance. Let’s checkout how do optic couplers work to understand this better. How do fiber optic couplers work? Either fiber optic couplers separate optical signals into multiple paths or combine multiple signals in one direction. Optical signals are more complicated than electrical signals, making it more difficult to design optical couplers than their electrical copy. Unlike electrical currents, the optical signal consists of a stream of signal carriers, in
阅读全文