5-Port 10/100/1000M POE Switch with 4-Port POE

5-Port 10/100/1000M POE Switch with 4-Port POE


FM SKU#:SKU00025L1
Model#:FM-POE3505G
link:http://www.fiber-mart.com/5port-101001000m-poe-switch-with-4port-poe-p-4008.html

5-Port 10/100/1000M Switch with 4-Port POE


Modern business networks are used for increasingly diverse applications – traditional data streams, VoIP voice traffic, video output from digital security cameras and remote control devices to name a few. The range of devices attached to today’s converged network often need to be supported not just in terms of data –equipment such as VoIP IP telephones and Wireless Access Points frequently need to be powered in physical locations where mains power is not available or difficult to deliver. Providing power to such devices via an Ethernet UTP cable is an elegant and easy to implement solution.
The 5-Ports Gigabit PoE switch is an unmanaged 10/100/1000Mbps Gigabit Ethernet PoE switch designed to enhance workgroup performance while providing a high level of flexibility. It provides 5 x 10/100/1000Mbps ports and 4 IEEE802.3af Power over Ethernet (PoE) ports for workstation. It is an ideal solution for small office and home users to utilize a combination of Gigabit PoE and non-PoE device. The switch automatically detects IEEE 802.3af compliant devices and provides power and data over a single cable.

Key Features


  • 5 x 10/100/1000Mbps Auto-negotiation Fast Ethernet RJ-45 ports with 4-Ports PoE function ( port 1 ~ port 4)
  • Compliant with IEEE 802.3af
  • Supports PoE power up to 66W (af) for all PoE ports
  • Supports PoE IEEE802.3af compliant Powered Device (PD)
  • Each port supports auto MDI/MDIX, so there is no need to use cross-over cables
  • Full/half duplex transfer mode for each port
  • Wire speed reception and transmission
  • Up to 2K unicast address entities per device. Self-learning, and table aging
  • 9216-byte jumbo packet length

    • Specifications

    StandardIEEE 802.3 10BASE-T Ethernet
    IEEE 802.3u 100BASE-TX Fast Ethernet
    IEEE 802.3x Full Duplex Flow Control
    IEEE 802.3af Power over Ethernet
    IEEE 802.3ab 1000Base-T Gigabit Ethernet (twisted-pair copper)
    ProtocolCSMA/CD
    Data Transfer RateEthernet: 10Mbps (half-duplex), 20Mbps (full-duplex)
    Fast Ethernet: 100Mbps (half-duplex), 200Mbps (full-duplex)
    Gigabit Ethernet: 2000Mbps (full duplex)
    Network Cables10Base-T: 2-pair UTP Cat 3, 4, 5 up to 100 meters.
    100Base-T : 2-pair UTP Cat 5, 5e up to 100 meters.
    1000Base-T: 4-pair UTP Cat5e 6, up to 100meters.
    Number of Ports5 x 10/100/1000Mbps auto-MDIX RJ-45 ports with 4 PoE enabled ports.
    PoE power on RJ-45Power +: pin 3 & pin 6 ; Power –: pin 1 & pin 2
    AC to DC power supplyInput: 100V ~ 240VAC, 50Hz ~ 60Hz. Output: 48VDC 1.5A

    Ordering Information

    P/NDescription-XX
    FM-POE3505G-XX5-Port 10/100/1000M Switch with 4-Port POET:IEEE802.3at1:15.4W
    F:IEEE802.3af3: 30W
    N:Non－standard

    StandardIEEE 802.3 10BASE-T Ethernet
    IEEE 802.3u 100BASE-TX Fast Ethernet
    IEEE 802.3x Full Duplex Flow Control
    IEEE 802.3af Power over Ethernet
    IEEE 802.3ab 1000Base-T Gigabit Ethernet (twisted-pair copper)
    ProtocolCSMA/CD
    Data Transfer RateEthernet: 10Mbps (half-duplex), 20Mbps (full-duplex)
    Fast Ethernet: 100Mbps (half-duplex), 200Mbps (full-duplex)
    Gigabit Ethernet: 2000Mbps (full duplex)
    Network Cables10Base-T: 2-pair UTP Cat 3, 4, 5 up to 100 meters.
    100Base-T : 2-pair UTP Cat 5, 5e up to 100 meters.
    1000Base-T: 4-pair UTP Cat5e 6, up to 100meters.
    Number of Ports5 x 10/100/1000Mbps auto-MDIX RJ-45 ports with 4 PoE enabled ports.
    PoE power on RJ-45Power +: pin 3 & pin 6 ; Power –: pin 1 & pin 2
    AC to DC power supplyInput: 100V ~ 240VAC, 50Hz ~ 60Hz. Output: 48VDC 1.5A

    评论

    发表评论

    此博客中的热门博文

    Common Armored Fiber Optic Cables

      Armored fiber optic cables are often installed in a network for added mechanical protection, as they have extra reinforcing in the cable housing to prevent damage. Two types of armored fiber optic cables exist: interlocking and corrugated. Interlocking armor is an aluminum armor that is helically wrapped around the cable and found in indoor and indoor/outdoor cables. It offers ruggedness and superior crush resistance. Corrugated armor is a coated steel tape folded around the cable longitudinally. It is found in outdoor cables and offers extra mechanical and rodent protection.   The Structure of an Armored Fiber Optic Cable In basic armored fiber cable designs, the outer sleeve provides protection against wind, solvents, and abrasion. This outer sleeve is usually made of plastic such as polyethylene. The next layer between the sleeve and the inner jacket is an armoring layer of materials that are difficult to cut, chew, or bu
    阅读全文

    what the Differences Between FBT Splitter and PLC Splitter

      In FTTx and PON architectures, optical splitter plays an increasingly significant role to create a variety of point-to-multipoint fiber optic networks. But do you know what is a fiber optic splitter? In fact, a fiber optic splitter is a passive optical device that can split or separate an incident light beam into two or more light beams. Basically, there are two types of fiber splitter classified by their working principle: fused biconical taper splitter (FBT splitter) and planar lightwave circuit splitter (PLC splitter). You may have one question: what’s the difference between them and shall we use FBT or PLC splitter?   What Is FBT Splitter? FBT splitter is based on a traditional technology to weld several fiber together from side of the fiber. Fibers are aligned by heating for a specific location and length. Because the fused fibers are very fragile, they are protected by a glass tube made of epoxy and silica powder. And then a stainless steel tube covers the inner glass tu
    阅读全文

    Introduction of Optical Fiber Couplers and How Do They Work?

     What are optical fiber couplers? A fiber optic coupler can be defined as an optical component used with one or more input fibers and several output fibers in fiber optic systems. A coupler essentially puts two or more cores of fibers together to connect. The simple coupler is the fused fiber 2x2 coupler. Couplers are used as multiplexers that are resistant to certain wavelengths. A fiber output depends on the wavelength of light and the frequency of polarization. The fiber refractive index also plays a significant role in the performance. Let’s checkout how do optic couplers work to understand this better. How do fiber optic couplers work? Either fiber optic couplers separate optical signals into multiple paths or combine multiple signals in one direction. Optical signals are more complicated than electrical signals, making it more difficult to design optical couplers than their electrical copy. Unlike electrical currents, the optical signal consists of a stream of signal carriers, in
    阅读全文