4-Port 10/100/1000M POE Switch with 1-Port 1000M Fx

4-Port 10/100/1000M POE Switch with 1-Port 1000M Fx



FM SKU#:SKU00021L1
Model#:FM-POE3603
link: http://www.fiber-mart.com/4port-101001000m-poe-switch-with-1port-1000m-fx-p-3576.html

4-Port 10/100/1000M POE Switch with 1-Port 1000M Fx

Modern business networks are used for increasingly diverse applications – traditional data streams, VoIP voice traffic, video output from digital security cameras and remote control devices to name a few. The range of devices attached to today’s converged network often need to be supported not just in terms of data –equipment such as VoIP IP telephones and Wireless Access Points frequently need to be powered in physical locations where mains power is not available or difficult to deliver. Providing power to such devices via an Ethernet UTP cable is an elegant and easy to implement solution.
FM-POE3603 is a 5 port (1FX+4TP) 10/100/1000M PoE (PSE) Ethernet Switch. The optical fiber port can greatly extend the transmission distance limitation of normal CAT5e UTP cable. All the four 10/100/1000Mbps UTP RJ-45 ports supports full duplex 10/100/1000M connectivity (half duplex only supported in 10/100M mode). Complied with IEEE802.3at and IEEE802.3af standard, the PoE(PSE) Ethernet Switch is a Power Sourcing Equipment (PSE) which combines data transfered over cable with 48V (typical) power supply, providing power to IEEE802.3at /IEEE802.3af powered device (PD) over CAT5e UTP cable (cable length up to 100meters /330feets). All the four UTP RJ-45 ports are organized to be PoE output port and each PoE port can output up to 60Watts (DC 48V/1.2A) power into CAT5e twisted-pair cable.

Key Features
  • Support one 1000Base-FX fiber optical port and four 10/100/1000Base-T UTP RJ-45 ports
  • 4 ports IEEE802.3at /IEEE802.3af PoE/PSE output
  • high power output up to 60Watts per port
  • Support IEEE 802.3z/AB 10/1001000Base-T and 1000Base-SX/LX/ZX standards
  • Supports IEEE 802.3x flow control - Supports 9216 bytes jumbo packet length
  • Built-in 1Mbits SRAM for packet buffer, with 4K-entry lookup table
  • Low power consume, low heat, and good reliability
  • Choice of SC, SFP, BiDi or other connectors for multimode and singlemode

    • Specifications

    Data Rates10/100/1000Mbps(IEEE802.3z/AB 10/100/1000Base-T)
    1000Mbps (1000Base- SX/LX/ZX)
    Input Power Requirements
    Input voltageInput voltage
    Power over Ethernet Output
    Pin Assignment and Polarity1/2 (V+),3/6 (V-) output power ≤30Watts
    1/2 /4/5(V+),3/6/7/8 (V-) output power >30Watts
    Environmental Conditions
    Operating temperature0℃ to 40℃
    Coolingfree air convection
    Storage temperature-20℃ to +85℃
    Operating Humidity90% max, non-condensing
    Mechanical Specifications
    Case MaterialIron
    Case ColorSilver grey
    Net Weight410g approx. /unit
    (Do not include external power adaptor)
    Dimensions158(W) x 27(H) x 95(L) (mm)
    (Do not include transceiver length)
    Connectors
    DC InletDC470-2.0
    LAN4 port Shielded RJ-45

    Ordering Information
    P/NDescriptionXXXXXXX
    FM-POE3603-XX-XXXX4-Port 10/100/1000M POE Switch with 1-Port 1000M FxT:1:15.4W2: 2port POES: Duplex Single-mode3: TX 1310nmS: SC05: 550M
    IEEE802.3at2: 25W4: 4port POEM: Duplex Multi-mode4: TX 1490nmF: FC2: 2KMM
    F:3: 30WB: Simplex Single-mode5: TX 1550nmT: ST20: 20KM
    IEEE802.3af5: 50WSFP: SFP Slot8: TX 850nmL: LC40: 40KM
    N:
    Non－standard

    Data Rates10/100/1000Mbps(IEEE802.3z/AB 10/100/1000Base-T)
    1000Mbps (1000Base- SX/LX/ZX)
    Input Power Requirements
    Input voltageInput voltage
    Power over Ethernet Output
    Pin Assignment and Polarity1/2 (V+),3/6 (V-) output power ≤30Watts
    1/2 /4/5(V+),3/6/7/8 (V-) output power >30Watts
    Environmental Conditions
    Operating temperature0℃to 40℃
    Coolingfree air convection
    Storage temperature-20℃to +85℃
    Operating Humidity90% max, non-condensing
    Mechanical Specifications
    Case MaterialIron
    Case ColorSilver grey
    Net Weight410g approx. /unit
    (Do not include external power adaptor)
    Dimensions158(W) x 27(H) x 95(L) (mm)
    (Do not include transceiver length)
    Connectors
    DC InletDC470-2.0
    LAN4 port Shielded RJ-45

    评论

    发表评论

    此博客中的热门博文

    Common Armored Fiber Optic Cables

      Armored fiber optic cables are often installed in a network for added mechanical protection, as they have extra reinforcing in the cable housing to prevent damage. Two types of armored fiber optic cables exist: interlocking and corrugated. Interlocking armor is an aluminum armor that is helically wrapped around the cable and found in indoor and indoor/outdoor cables. It offers ruggedness and superior crush resistance. Corrugated armor is a coated steel tape folded around the cable longitudinally. It is found in outdoor cables and offers extra mechanical and rodent protection.   The Structure of an Armored Fiber Optic Cable In basic armored fiber cable designs, the outer sleeve provides protection against wind, solvents, and abrasion. This outer sleeve is usually made of plastic such as polyethylene. The next layer between the sleeve and the inner jacket is an armoring layer of materials that are difficult to cut, chew, or bu
    阅读全文

    what the Differences Between FBT Splitter and PLC Splitter

      In FTTx and PON architectures, optical splitter plays an increasingly significant role to create a variety of point-to-multipoint fiber optic networks. But do you know what is a fiber optic splitter? In fact, a fiber optic splitter is a passive optical device that can split or separate an incident light beam into two or more light beams. Basically, there are two types of fiber splitter classified by their working principle: fused biconical taper splitter (FBT splitter) and planar lightwave circuit splitter (PLC splitter). You may have one question: what’s the difference between them and shall we use FBT or PLC splitter?   What Is FBT Splitter? FBT splitter is based on a traditional technology to weld several fiber together from side of the fiber. Fibers are aligned by heating for a specific location and length. Because the fused fibers are very fragile, they are protected by a glass tube made of epoxy and silica powder. And then a stainless steel tube covers the inner glass tu
    阅读全文

    Introduction of Optical Fiber Couplers and How Do They Work?

     What are optical fiber couplers? A fiber optic coupler can be defined as an optical component used with one or more input fibers and several output fibers in fiber optic systems. A coupler essentially puts two or more cores of fibers together to connect. The simple coupler is the fused fiber 2x2 coupler. Couplers are used as multiplexers that are resistant to certain wavelengths. A fiber output depends on the wavelength of light and the frequency of polarization. The fiber refractive index also plays a significant role in the performance. Let’s checkout how do optic couplers work to understand this better. How do fiber optic couplers work? Either fiber optic couplers separate optical signals into multiple paths or combine multiple signals in one direction. Optical signals are more complicated than electrical signals, making it more difficult to design optical couplers than their electrical copy. Unlike electrical currents, the optical signal consists of a stream of signal carriers, in
    阅读全文