Fiber-Mart, worldwide leading supplier in fiber optic network, fttx, fiber cabling, fiber testing.

For most data centers and network service providers, if you want to be competitive, you must continually improve your network speed to meet people's growing network needs. Over the past few years, 40G networks is very popular, and now according to authoritative statistics, by 2018, the world will have 38% of service providers to deploy 100G network, which means 100G era has arrived. 100G optical module is an important part of the 100G network, and 100G QSFP28 optical modules is the industry's most respected 100G optical module, this tutorial will be introduced in detail.   About 100G QSFP28 optical modules   The encapsulation of  100G QSFP28 optical module  and 40G QSFP + optical module is the same , and both are using four Fiber Channel to transmit data, the difference is that the transmission rate of 100G QSFP28 optical module fiber channel can be up to 28Gbps, mainly for 100G transmission applications Compared to 100G CFP optical modules, the 100G QSFP28 optical mod

by www.fiber-mart.com SFP optical module  (Small Form-factor Pluggable) can be easily understood as an upgraded version of the GBIC optical module. SFP optical module is half the size of the GBIC optical module, which is only the thumb-size but can configure on the same panel more than double ports on the same panel. The other functions of the SFP optical module are basically the same as those of the GBIC optical module.   1. Components of SFP Optical Module   SFP optical modules are mainly composed of lasers (including transmitter TOSA and receiver ROSA), circuit board IC and external accessories. The external parts are mainly composed of the shell, the base, the PCBA, the pull ring, the buckle, the unlocking piece and the rubber stopper. In order to recognize conveniently, the parameter type of the optical module is generally distinguished by the color of the pull ring.   2. SFP Optical Module Maintenance   SFP optical module covers a lot of sophisticated optical c

by www.fiber-mart.com Nowadays, with the rapid development of science and technology and the continuous improvement of user's needs, 40G applications in the communications industry are becoming more and more widely, at the same time, servers, switches, optical modules and other devices are also upgrading, the solutions for multi-mode application QSFP + Optical module are also more and more. Choosing the right 40G QSFP + optical module in a multimode connection application not only provides high performance, but also saves money. This article will explore how to choose a 40G QSFP + optical module for multimode connection applications.   1. Multi-mode application under the 40G QSFP + optical module type   In the 40G short-range multimode connection applications, there are three commonly used optical modules on the market, namely 40GBASE-SR4 QSFP + optical module, 40GBASE-CSR4 QSFP + optical module and 40GBASE-SR BiDi QSFP + optical module.2. The factors to consider for sel

Many buyers have questions. Why do sellers generally ask which compatible optical modules are needed when purchasing  compatible optical modules ? Today, our Fiberland company will explain this to you.   Because our optical modules are generally used with switches, and switches have many brands, such as Cisco, Huawei, China, Juniper, Hewlett-Packard, ZTE, Pulian, Youxun, Mikrotik, Planet, Extreme, Alcatel, Annette, etc. Wait. Different brands determine the compatibility of the media converter.   Many people have questions. Is there an optical module that is compatible with all switches? The answer is that the same optical module is not compatible with all brands of switches. Just like a lock with a key. The optical module plug-in switch is also the same principle. The compatible code of the optical module is like a key, and the switch is like a lock. Different compatible optical modules are compatible with different codes. For example, Huawei has its own compatible code, and

CWDM SFP  (Coarse Wavelength Division Multiplexing) transceiver, used on SFP ports or slots on the switches or routers, is a technology that allows for multiple channels, of mixed protocols and data rates, to be COMBINED and transmitted over fiber optic cable.   CWDM SFP makes use of the SFP interface to connect the apparatus and also double LC/PC fiber connector software to connect the optical network. CWDM SFP is used to link the ports to the fiber optic network, typical CWDM SFP like Cisco’s could support both Gigabit Ethernet and Fiber Channel. It is compatible with Fast Ethernet, SONET OC-3 and OC-12, and SDH STM-1 and STM-4 standards.   Basic Features of CWDM SFP transceiver   Hot-Pluggable, Dual LC port; Class 1 Laser safety, compliant with IEC60825-1; Transmitter center wavelength: 1270nm,1290nm,1310nm,1330nm,1350nm,1370nm,1390nm,1410nm,1430nm,1450nm,1470nm, 1490nm, 1510nm, 1530nm, 1550nm, 1570nm, 1590nm and 1610nm; Receiver PIN or APD; Single +3.3V power

A SFP (small form-factor pluggable) is a small transceiver that plugs into the SFP port of a network switch and connects to Fibre Channel and Gigabit Ethernet (GbE) optical fibre cables at the other end. By choosing the appropriate SFP module, the same electrical port on the switch can connect to fibres of different types (multimode or singlemode) and different wavelengths. If the fibre is upgraded, the SFP module is replaced.   What's the difference   SFP’s can be expensive due to their complex technical nature but possible more so to do with the brand name placed upon certain SFP’s, such as Cisco, Avaya and Brocade inflating the price tag. Why see your budget wasted on over-priced vendor transceivers, when all you need is a  Compatible SFP ?   Compatible SFP products are available for almost all brands and models and can be up to 80% cheaper than their branded counterparts. Compatible SFPs for all brands are specifically designed to meet to specifications of each bra

Having photonic and electrical layer normal accordance interfaces are small type component pluggable transceivers. Commercially marketed compact SFP modules are capable to support insofar as 4.25Gbit/s and together with the previous types are enhanced SFP+ models that are aimed for greater data rates such as 8.5Gbit/s and 10.52Gbit/s Fiber Channel.   XFP Transceivers  commercially available in the market now include the 10Gbase SR XFP, 10Gbase LR XFP, 10GBase-ER XFP and 10Gbase ZR XFP.   These Fiber Transceivers are with Digital Diagnostics that provide a powerful optical management tool. 10Gbase SR XFP is used with OM3 50/125 laser optimized multimode fiber with max working span around 300 meters.   The other three standards are all for single mode fiber applications, 10Gbase LR XFP work with 1310nm SMF and max working distance 10km, 10Gbase ER XFP work with 1550nm SMF and working range max 40km, 10Gbase LR XFP is also 1550nm wavelength and working span is 80km max.  

SFP (small form-factor pluggable) is a compact,  hot-pluggable transceiver  used for both telecommunication and data communication applications. It interfaces a network device mother board to a fiber optic or copper networking cable. It is a popular industry format jointly developed and supported by many network component vendors. SFP transceivers are designed to support SONET, Gigabit Ethernet, Fiber Channel, and other communications standards.   Dense Wavelength Division Multiplexing (DWDM) optical transceivers provide DWDM transport to greatly reduce the power consumption and the cost of standard pluggable small form-factor pluggable (module) package. Our SFP DWDM Transceiver is available in all 100 GHz C/L-band wavelength division multiplexing International Telecommunications Union. Their aim was to Multi-Source Agreement (MSA) standards to ensure compatibility with the majority of network equipment.    As a multi-rate interface, SFP DWDM Transceiver supports any protocol

Hewlett-Packard (HP) Company, established in 1939, is an American multinational information technology corporation based in United States. It is a leading company in providing hardware, software and service to consumers, small or medium sized business and large enterprises.   HP product lines including a vast range of hardware, widely used in printing, digital imaging, software, computing as well as network service. After more than more than 70 years development, it has been one of the giant network device providers in the world. Optical fiber communication is one of the main businesses of this company. Products include network routers, switches, as well as the brand transceivers.   The original brand devices are widely used in Internet data centers. Due to its high quality and exclusive patent certification, prices of these products are extremely high and hardly to be applied in every network or connection. In order to solve this problem, more and more compatible products are

by www.fiber-mart.com When setting up your network, the selection of devices is fundamental to determining the performance of the system. But those devices can't communicate without optical transceivers. If your network contains Cisco or Juniper routers, firewalls, and switches, you might assume that with such branded optics only is sensible, to make sure that all of your devices are compatible and processes optimally. However, that seemingly reasonable assumption could cost your company thousands of dollars. Compared to the compatible units produced by third (3rd) party companies, the transceiver units come with dramatically inflated prices. Compatible units are roughly 80 percent less than the branded optics.    Why Should You Choose Compatible Optical Transceivers? Let us take the  Cisco compatible SFP transceive r modules for example. Cisco compatible SFPs are simply a great throughout deal. Not many situations are this easy. So don't get this to difficult on you

by www.fiber-mart.com CWDM SFP (Coarse Wavelength Division Multiplexing) transceiver, used on SFP ports or slots on the switches or routers, is a technology that allows for multiple channels, of mixed protocols and data rates, to be COMBINED and transmitted over fiber optic cable.   CWDM SFP  makes use of the SFP interface to connect the apparatus and also double LC/PC fiber connector software to connect the optical network. CWDM SFP is used to link the ports to the fiber optic network, typical CWDM SFP like Cisco’s could support both Gigabit Ethernet and Fiber Channel. It is compatible with Fast Ethernet, SONET OC-3 and OC-12, and SDH STM-1 and STM-4 standards.   Basic Features of CWDM SFP transceiver   Hot-Pluggable, Dual LC port; Class 1 Laser safety, compliant with IEC60825-1; Transmitter center wavelength: 1270nm,1290nm,1310nm,1330nm,1350nm,1370nm,1390nm,1410nm,1430nm,1450nm,1470nm, 1490nm, 1510nm, 1530nm, 1550nm, 1570nm, 1590nm and 1610nm; Receiver PIN or A

by www.fiber-mart.com Today’s technology presents unprecedented migration incorporating a wide range of application requirements such as database, transaction processing, data warehousing, integrated audio/video, real-time computing, and collaborative projects. Fibre Channel and Gigabit Ethernet, both are the ideal solutions for IT professionals who need reliable, cost-effective information storage and delivery at fast speeds. Fibre Channel is available in 1G/2G/4G/8G/16G FC and 10GFCoE, 40GFCoE and 100GFCoE nowadays. Gigabit Ethernet is the reigning network for data center and server room. The battle between Fibre Channel and Ethernet is complicated. However, this article will help you solve it out by comparing 10G SFP+ Fibre Channel transceiver modules and 10G Ethernet SFP+ modules.   Encoding Mechanisms of Ethernet and FC Any time we’re transmitting or storing data, we encode it in some form or another. Then we need to understand the encoding mechanisms of Ethernet and FC.

XENPAK is a multisource agreement (MSA) for a 10 Gigabit Ethernet (10GbE) transceiver package. It’s the oldest 10G fiber optic transceiver. XENPAK transceivers is designed with XAUI interface and Digital Diagnostic Monitor Interface, which comply with the XENPAK MSA protocol and satisfy the application of 802.3ae Ethernet protocol 10GB. XENPAK transceivers are supplied for physical layer interfaces supporting multi-mode and single mode fiber optic cables and InfiniBand copper cables with connectors like as CX4. Transmission distances vary from 100 metres (330 ft) to 80 kilometres (50 mi) on fiber and up to 15 metres (49 ft) on CX4 cable. Newer XENPAKs using the 10GBase-LX4 standard operated using multiple wavelengths on legacy multi-mode fibres at distances of up to 300 metres (980 ft), eliminating the need to reinstall cable in a building when upgrading certain 1 Gbit/s circuits to 10 Gbit/s.   The XENPAK form factor was initially supported by numerous network equipment manufactu

In the 40GbE and IB-FDR(56Gb) interconnect solutions,  40Gb QSFP+ transceivers  account for a large percentage of the market share. QSFP+ SR4, QSFP+ eSR4, QSFP+ IR4 and QSFP+ LR4 are the most popular optical modules.    QSFP+ SR4(QSFP-40G-SR4) offers 4 independent transmit and receive channels, each capable of 10Gbps operation for an aggregate data rate of 40Gbps over 100 meters on OM3 multi-mode fiber(MMF) or over 150 meters on OM4 MMF.    QSFP+ eSR4(QSFP-40G-CSR4) that works in the same principle as SR4, can be considered an enhanced QSFP+ SR4. 40GBASE-eSR4 QSFP+ Modules extend the reach of the IEEE 40GBASE-SR4 interface to 300 meters and 400 meters on laser-optimized OM3 and OM4 MMF respectively.    How to choose a 40G QSFP+ Transceiver? QSFP+ IR4 module(WSP-Q40G-LR4L) works with signals over four wavelengths, which were multiplexed and demultiplexed within the device. QSFP+ IR4 supports link lengths of up to 2 kilometers on a standard pair of single-mode fiber(SMF) w