ST-2010 Fused Biconic Taper FBT System (PM coupler)

ST-2010 Fused Bi-conic Taper(FBT) System
Description
ST-2010 Fused Bi-conic Taper(FBT) System, is an automatic controlled coupler working station, which integrates  Electronic,  Precision  Processing,  as  well  as  Computer  technologies,  can  meet  various function requirements: Manufacturing, Testing,Monitoring & controlling, With its easy-to-use character,2010 FBT system were widely used for manufacturing splitters, couplers,WDMs, CWDMs and so on.As time goes by, FBT technology has become the basic technology for optic fiber coupler fabricating,higher and higher precision machine(coupler workstation) has emerged to deal with more and more demands on high quality, high precison and high stabilty optic fiber couplers. Such as dual-windows broadband fiber splitters, high isolation WDM units, and a lot of other new components.
Features
High-capacity, high reliability,flexible Manufacturing
High-precision, large-scale, multi-wavelength online measurement
Real-time monitoring. East-and-quick positioning
"nm" level breakdown of micro-level drive
Mechanical precision, ultra-smooth operation,shock-proof design
Modular design, easy maintenance and upgrade
Additional low loss, good consistency of Products
Windows-based software package, user-friendly, convenient operation, powerful The use of hydrogen generation device to eliminate potential safety problems High precision of splitting ratio,Good environmental stability
 
Application
Fiber pull machine
Optical power monitoring meter
Hydrogen gas flow controlling devices
Ultraviolet Light Solidified Device+Manual encapsulation
Automatic encapsulation heating solidifying.Computer for controlling

 
Model
ST-2010

Application
Standard Coupler Wide-band Coupler WDM Coupler Special Coupler


Movement Resolution Of Fiber Chucks
0.001um/um/Step
Pulling speed(one side)
0-400um/sec
Stroke Length Of Fiber Chucks
25-100mm
Pre-Pulling
0.001-10mm
Movement Resolution Of Torch Unit
3 axes 1.5mm/step
Hydrogen Flow Control
0-300 sccm
Pre-Package Unit
Auto
Curing Temperature Of Pre-Package Unit
Continuous Adyustment
Photo Detectors
φ2mm InGaAs
WaveLength Range
850nm-1650nm
Power Meter Range
+3dBm - -70dBm
Power Meter Accuracy
±5%(-10dBm,23℃)
Power Meter linearity
±0.02dB(+3dBm - -60dBm)


Dimension(w×d×h)
558×398×250
Voltage Supply
110VAC or 220 VAC 50/60Hz
Power Consumption
320W

Order Info:

, , , , , , ,
Standard Package
　Main Workstation
1
Set
　FC/PC Bare Fiber Adaptor
2
Set
　Hydrogen Flow Controller
1
Set
   ST-2010 Software Package(Windows 2000 professional)&, lt;, /TD>,    1
Set
 
 
 
Optional
　Stable Laser Light Source 850/980/1310/1550nm  
　1×2 or 1×4 Optical Switch for Light Source Input  
　Manual PDL Controller  
　UltraStable Torch Head  
　Trainning Program  

评论

发表评论

此博客中的热门博文

Common Armored Fiber Optic Cables

  Armored fiber optic cables are often installed in a network for added mechanical protection, as they have extra reinforcing in the cable housing to prevent damage. Two types of armored fiber optic cables exist: interlocking and corrugated. Interlocking armor is an aluminum armor that is helically wrapped around the cable and found in indoor and indoor/outdoor cables. It offers ruggedness and superior crush resistance. Corrugated armor is a coated steel tape folded around the cable longitudinally. It is found in outdoor cables and offers extra mechanical and rodent protection.   The Structure of an Armored Fiber Optic Cable In basic armored fiber cable designs, the outer sleeve provides protection against wind, solvents, and abrasion. This outer sleeve is usually made of plastic such as polyethylene. The next layer between the sleeve and the inner jacket is an armoring layer of materials that are difficult to cut, chew, or bu
阅读全文

what the Differences Between FBT Splitter and PLC Splitter

  In FTTx and PON architectures, optical splitter plays an increasingly significant role to create a variety of point-to-multipoint fiber optic networks. But do you know what is a fiber optic splitter? In fact, a fiber optic splitter is a passive optical device that can split or separate an incident light beam into two or more light beams. Basically, there are two types of fiber splitter classified by their working principle: fused biconical taper splitter (FBT splitter) and planar lightwave circuit splitter (PLC splitter). You may have one question: what’s the difference between them and shall we use FBT or PLC splitter?   What Is FBT Splitter? FBT splitter is based on a traditional technology to weld several fiber together from side of the fiber. Fibers are aligned by heating for a specific location and length. Because the fused fibers are very fragile, they are protected by a glass tube made of epoxy and silica powder. And then a stainless steel tube covers the inner glass tu
阅读全文

Introduction of Optical Fiber Couplers and How Do They Work?

 What are optical fiber couplers? A fiber optic coupler can be defined as an optical component used with one or more input fibers and several output fibers in fiber optic systems. A coupler essentially puts two or more cores of fibers together to connect. The simple coupler is the fused fiber 2x2 coupler. Couplers are used as multiplexers that are resistant to certain wavelengths. A fiber output depends on the wavelength of light and the frequency of polarization. The fiber refractive index also plays a significant role in the performance. Let’s checkout how do optic couplers work to understand this better. How do fiber optic couplers work? Either fiber optic couplers separate optical signals into multiple paths or combine multiple signals in one direction. Optical signals are more complicated than electrical signals, making it more difficult to design optical couplers than their electrical copy. Unlike electrical currents, the optical signal consists of a stream of signal carriers, in
阅读全文