10dBm Output Single Channel Booster EDFA Optical Amplifier for SDH Networks

FM SKU#:SKU30503S
Model#:SDH-EDFA-BA-O10
MFG PART#:

 

10 dBm Output Single Channel Booster EDFA Optical Amplifier for SDH Networks
Fiber-Mart SDH-EDFA-BA-O6 booster amplifier designed for the Synchronous Digital Hierarchy (SDH) applications which installed after the optical transmitter to increase transmission distance for single wavelength optical module system. The device features wide input power range from -10dBm to +6dBm, output power up to 10dBm and low noise figure. It also includes RS-232 computer interface.



This Rack mountable amplifier work by default in constant signal-gain mode, but they can be configured to constant total output-power mode. These units are used in long-hauls transmission applications, especially for PDH, SDH, SONET and optical Ethernet transmission application. Its ease-of-use and performance make the SDH-EDFA-BA-xx series the ideal solution for Access and Metro optical networks.


 

Features
  • Service as a booster amplifier C-Band 1550nm
  • Tunable output power: 10dBm
  • Wide input power range: -10~+6dBm
  • Low loise figure: typical is< 4.5dB
  • Connectors: SC/UPC, SC/APC, FC/UPC, FC/APC, LC/UPC, LC/APC, ST/UPC and ST/APC connectors are available
  • Single or dual 110VAC, 220VAC, -48VDC, and/or 100V-240V power supply
  • Serial interface comes with RS232, RS485
  • 1U 19” rack mount structure for easy installation
  • All performance compatible with BellcoreGR-1312-CORE request
  • Use for Access and Metro optical networks
  • Works with point-to-point applications
  • High stability and reliability
  • 3 years warranty
  • 10 years of operation life
  • OEM is available

Highlights

  • Hot Swap Network Management Agent
  • SNMP network management interface: RJ45
  • Support Telnet for optional
  • ASE noise filter & ASE suppression filters
  • High Precise ACC (automatic constant current) Circuit as default, if you need other circuit, please contact at sales@fiber-mart.com
  • ATC (automatic temperature control) function
  • Offering status appearance and diagnosing fault with LCD

Mechanical Structure


Structure Example


NOTE:

  • The SDH EDFA from Fiber-Mart including 1+2+3.
ParametersSymbolMinTypMaxUnit
Operation Wavelengthλc153015501562nm
Saturated output power (1)Po  10dBm
Input power (2)Pi-10 6dBm
GainG------ ------dB
Noise FigureNF 4.5 dB
Input IsolationISOi30  dB
Output IsolationISOo30  dB
Input pump leakagePumpLin  -35dBm
Output pump leakagePumpLout-45 -45dBm
Return LossRL  -45dB
Polarization Dependent GainPDG  0.3dB
PMDPMD  0.5ps
Operation TemperatureTw-5 60℃
Storage TemperatureTs-40 80℃
Humidity (3) 10 85%
Power VoltageVps85/170110/220132/264VAC
Power ConsumptionP  18W
Serial interfaceRS232, RS485
Power supply110VAC, 220 VAC, -48VDC, or 100V-240V
ConnectorsSimplex SC/UPC, SC/APC, FC/UPC, FC/APC, LC/UPC, LC/APC , ST/UPC and ST/APC available
Warranty3 years

(1): Customer optional
(2): Pre-Amplifier: input power –35~-25dBm; Inline-Amplifier: input power –25~-10dBm, Booster: input power –10～+6dBm

评论

发表评论

此博客中的热门博文

Common Armored Fiber Optic Cables

  Armored fiber optic cables are often installed in a network for added mechanical protection, as they have extra reinforcing in the cable housing to prevent damage. Two types of armored fiber optic cables exist: interlocking and corrugated. Interlocking armor is an aluminum armor that is helically wrapped around the cable and found in indoor and indoor/outdoor cables. It offers ruggedness and superior crush resistance. Corrugated armor is a coated steel tape folded around the cable longitudinally. It is found in outdoor cables and offers extra mechanical and rodent protection.   The Structure of an Armored Fiber Optic Cable In basic armored fiber cable designs, the outer sleeve provides protection against wind, solvents, and abrasion. This outer sleeve is usually made of plastic such as polyethylene. The next layer between the sleeve and the inner jacket is an armoring layer of materials that are difficult to cut, chew, or bu
阅读全文

what the Differences Between FBT Splitter and PLC Splitter

  In FTTx and PON architectures, optical splitter plays an increasingly significant role to create a variety of point-to-multipoint fiber optic networks. But do you know what is a fiber optic splitter? In fact, a fiber optic splitter is a passive optical device that can split or separate an incident light beam into two or more light beams. Basically, there are two types of fiber splitter classified by their working principle: fused biconical taper splitter (FBT splitter) and planar lightwave circuit splitter (PLC splitter). You may have one question: what’s the difference between them and shall we use FBT or PLC splitter?   What Is FBT Splitter? FBT splitter is based on a traditional technology to weld several fiber together from side of the fiber. Fibers are aligned by heating for a specific location and length. Because the fused fibers are very fragile, they are protected by a glass tube made of epoxy and silica powder. And then a stainless steel tube covers the inner glass tu
阅读全文

Introduction of Optical Fiber Couplers and How Do They Work?

 What are optical fiber couplers? A fiber optic coupler can be defined as an optical component used with one or more input fibers and several output fibers in fiber optic systems. A coupler essentially puts two or more cores of fibers together to connect. The simple coupler is the fused fiber 2x2 coupler. Couplers are used as multiplexers that are resistant to certain wavelengths. A fiber output depends on the wavelength of light and the frequency of polarization. The fiber refractive index also plays a significant role in the performance. Let’s checkout how do optic couplers work to understand this better. How do fiber optic couplers work? Either fiber optic couplers separate optical signals into multiple paths or combine multiple signals in one direction. Optical signals are more complicated than electrical signals, making it more difficult to design optical couplers than their electrical copy. Unlike electrical currents, the optical signal consists of a stream of signal carriers, in
阅读全文