12 Fibers 10G OM3 LC/SC/ST/FC 12 Strands MTP LGX Cassette

FM SKU#:SKU000162T
Model#:FM12OM3-LGX-2MTP-XX
MFG PART#:

12 Fibers, MTP to LC/SC/ST/FC, 50/125 10G OM3 Fiber, 12 Standard, LGX - MTP Cassette Panel

Fiber-Mart’s MTP Cassette Modules provide secure transition between MTP and LC,SC,ST or FC discrete connectors with two types.
The MTP modules are fitted with 12 or 24 fibers and have LC, SC adapters on the front side and MTP at the rear.
Cassette Type: StandardCassette Type: Irregular shape
 
The term MTP is a registered trademark of US Conec, it has been the main trend in European and American areas.
 

Features

  • High performance zirconia sleeve adapters.
  • Rapid deployment Factory terminated modular system saves installation and reconfiguration time during moves, adds and changes.
  • MTP interface MTP components feature superior optical and mechanical properties.
  • Optimized performance Low loss MTP Elite, discrete Premium connectors and OM4 fiber assures low insertion losses and power penalties in tight power budget, high-speed network environments.
  • High density 12 or 24 fiber cassettes can be mounted in 1U scaling up to 72 or in 4U scaling up to 288 discrete connectors.
  • Reliability 100% tested - combination of high quality components and manufacturing quality control guarantees product to the highest standards.

Application

  • Data centers
  • LAN, WAN and SAN
  • Interoffice cross-connects
  • Campus environments

Mechanical Drawing:


1U slide and tilt panel - holds up to 3 cassettes (72 fibers)MTP Cassette housing in 4U Rack mount

MTP Cassette Structure

MTP cable connect with MTP CassetteMTP Harness cable housing in MTP Cassette



Specifications

Connector requirements
  MultimodeSingle mode
ILMTPSingle max:0.35dB(L)
Single max:0.60dB(G)		Single max:0.35dB(L)
Single max:0.75dB(G)
LCmax:0.10dB(L)
max:0.15dB(G)		MAX:0.3dB
RLMTP>20dB>60dB(8°Angle Polish)
LC>30dB>50dB(UPC)
>60dB(APC)
MechanicalMTP<0.2dB,200times insertion
LC<0.2dB,200times insertion
EnvironmentalWorking Temp.-20~ +60℃
Storage Temp.-40~ +70℃
Install Temp-5~ +50℃

Order Information

Order InformationPackaging
Mode TypeFiber StandardFiber ConnectorFiber countsPolish Type1. MTP-FC/SC/ST/LC Fiber Optic Cable
( The type of fiber mode according to
your choice MTP/MPO Cassettes )
2. FC/SC/LC/ST Fiber Adapter
3. MTP/MPO Fiber Adapter
4. LGX box
OM412 Fiber Standard
24 Fiber Standard		MTP-FC ( 12 fiber available )
MTP-SC (12 fiber available )
MTP-LC (12&24fiber available )
MTP-ST (12 fiber available )		12 Fibers
24 Fibers		UPC APC
OM3
OS1/2
OM2
OM1

评论

发表评论

此博客中的热门博文

Common Armored Fiber Optic Cables

  Armored fiber optic cables are often installed in a network for added mechanical protection, as they have extra reinforcing in the cable housing to prevent damage. Two types of armored fiber optic cables exist: interlocking and corrugated. Interlocking armor is an aluminum armor that is helically wrapped around the cable and found in indoor and indoor/outdoor cables. It offers ruggedness and superior crush resistance. Corrugated armor is a coated steel tape folded around the cable longitudinally. It is found in outdoor cables and offers extra mechanical and rodent protection.   The Structure of an Armored Fiber Optic Cable In basic armored fiber cable designs, the outer sleeve provides protection against wind, solvents, and abrasion. This outer sleeve is usually made of plastic such as polyethylene. The next layer between the sleeve and the inner jacket is an armoring layer of materials that are difficult to cut, chew, or bu
阅读全文

what the Differences Between FBT Splitter and PLC Splitter

  In FTTx and PON architectures, optical splitter plays an increasingly significant role to create a variety of point-to-multipoint fiber optic networks. But do you know what is a fiber optic splitter? In fact, a fiber optic splitter is a passive optical device that can split or separate an incident light beam into two or more light beams. Basically, there are two types of fiber splitter classified by their working principle: fused biconical taper splitter (FBT splitter) and planar lightwave circuit splitter (PLC splitter). You may have one question: what’s the difference between them and shall we use FBT or PLC splitter?   What Is FBT Splitter? FBT splitter is based on a traditional technology to weld several fiber together from side of the fiber. Fibers are aligned by heating for a specific location and length. Because the fused fibers are very fragile, they are protected by a glass tube made of epoxy and silica powder. And then a stainless steel tube covers the inner glass tu
阅读全文

Introduction of Optical Fiber Couplers and How Do They Work?

 What are optical fiber couplers? A fiber optic coupler can be defined as an optical component used with one or more input fibers and several output fibers in fiber optic systems. A coupler essentially puts two or more cores of fibers together to connect. The simple coupler is the fused fiber 2x2 coupler. Couplers are used as multiplexers that are resistant to certain wavelengths. A fiber output depends on the wavelength of light and the frequency of polarization. The fiber refractive index also plays a significant role in the performance. Let’s checkout how do optic couplers work to understand this better. How do fiber optic couplers work? Either fiber optic couplers separate optical signals into multiple paths or combine multiple signals in one direction. Optical signals are more complicated than electrical signals, making it more difficult to design optical couplers than their electrical copy. Unlike electrical currents, the optical signal consists of a stream of signal carriers, in
阅读全文