Armored Cable vs. Flexible Cable: Key Differences

by www.fiber-mart.com
When transmitting data or conducting power in harsh environments, protecting your cables is crucial to safe and reliable operation. This is where armored cables come into play. They are used primarily in industrial applications, often in cable trays and raceways. They often not used in flexing applications. While they could operate there, the connector cable would create a weak link. To combat this, you should use either a high-flex cable on the inside or discreet wires.
Jacketing materials—such as a silicone tube-covered, thermoplastic elastomer or PVC—further protect the cables from harsh chemicals, oils and sunlight, but also prevent physical failure by repetitive impacts, abrasion with loaded components, and weld slag. In addition, most armored cable jacketing materials are flame resistant.Armored cables feature some type of metal sheath that is the first layer of armor. It is usually made of interlocking or continuous aluminum or stainless steel, or it can be covered in a smooth or corrugated metal tape. According to Mencom, which uses a stainless-steel design, the armor protects the cable inside from water damage by high-pressure washdown, cleaning agents and extreme temperatures.
Unlike cable shielding, which is often braided or a foil wrap design, the armor shield is wound around the cable, giving it a corded, corrugated appearance.
Two gentleman named Edwin Greenfield and Gus Johnson first developed armored cable, or BX cable, in the early 20th century. It used a flexible steel cover, but now more commonly uses flexible aluminum conduits. Metal-clad cables are typically galvanized steel or aluminum interlocking cable. And some companies’ armored cables, such as Mencom, use a woven flexible stainless-steel design.
A big difference in the three designs is in how they are ground. BX are usually ground through the sheath; this is why BX cables most often need to be buried. Armored cables also ground through the sheath but can be exposed at certain areas without causing the system to ground. Metal-clad armored cables, like those used in industrial settings, feature a grounding wire—usually an annealed bare copper wire—inside the wire bundle. This allows them to be used in open areas, such as in running through factories and plants throughout raceways and cable trays and carriers.
Armored cables must be IP67-rated and certified to UL and NEC standards, among others.

评论

发表评论

此博客中的热门博文

Common Armored Fiber Optic Cables

  Armored fiber optic cables are often installed in a network for added mechanical protection, as they have extra reinforcing in the cable housing to prevent damage. Two types of armored fiber optic cables exist: interlocking and corrugated. Interlocking armor is an aluminum armor that is helically wrapped around the cable and found in indoor and indoor/outdoor cables. It offers ruggedness and superior crush resistance. Corrugated armor is a coated steel tape folded around the cable longitudinally. It is found in outdoor cables and offers extra mechanical and rodent protection.   The Structure of an Armored Fiber Optic Cable In basic armored fiber cable designs, the outer sleeve provides protection against wind, solvents, and abrasion. This outer sleeve is usually made of plastic such as polyethylene. The next layer between the sleeve and the inner jacket is an armoring layer of materials that are difficult to cut, chew, or bu
阅读全文

what the Differences Between FBT Splitter and PLC Splitter

  In FTTx and PON architectures, optical splitter plays an increasingly significant role to create a variety of point-to-multipoint fiber optic networks. But do you know what is a fiber optic splitter? In fact, a fiber optic splitter is a passive optical device that can split or separate an incident light beam into two or more light beams. Basically, there are two types of fiber splitter classified by their working principle: fused biconical taper splitter (FBT splitter) and planar lightwave circuit splitter (PLC splitter). You may have one question: what’s the difference between them and shall we use FBT or PLC splitter?   What Is FBT Splitter? FBT splitter is based on a traditional technology to weld several fiber together from side of the fiber. Fibers are aligned by heating for a specific location and length. Because the fused fibers are very fragile, they are protected by a glass tube made of epoxy and silica powder. And then a stainless steel tube covers the inner glass tu
阅读全文

Introduction of Optical Fiber Couplers and How Do They Work?

 What are optical fiber couplers? A fiber optic coupler can be defined as an optical component used with one or more input fibers and several output fibers in fiber optic systems. A coupler essentially puts two or more cores of fibers together to connect. The simple coupler is the fused fiber 2x2 coupler. Couplers are used as multiplexers that are resistant to certain wavelengths. A fiber output depends on the wavelength of light and the frequency of polarization. The fiber refractive index also plays a significant role in the performance. Let’s checkout how do optic couplers work to understand this better. How do fiber optic couplers work? Either fiber optic couplers separate optical signals into multiple paths or combine multiple signals in one direction. Optical signals are more complicated than electrical signals, making it more difficult to design optical couplers than their electrical copy. Unlike electrical currents, the optical signal consists of a stream of signal carriers, in
阅读全文