100W 1064nm High Power Collimated Free Space Beam Output Isolator HPCFMI

MFG PART#:

100W 1064nm High Power Collimated Free Space Beam Output Isolator HPCFMI

Fiber-Mart high power components HPCFMI-1064-100 is 1064nm 100w 3.0mm loose tube HI1060 fiber 1M Output Beam Diameter :8mm。 It also can customize rang from 780nm to 1550nm and handling power from 300mW to 100W or other on request. Low insertion loss, high isolation, high power handling, high return loss, high extinction ratio and excellent environmental stability and reliability.

Characteristics

  • High Isolation& High Power Handling
  • High Extinction Ratio
  • Low insertion Loss & High Return Loss
  • Excellent Environmental Stability and Reliability

Applications

  • Fiber Amplifier
  • Fiber sensor
  • Instrumentation Applications
  • Lab Research

Specifications

Parameters
Unit
Values
Center Wavelength
nm
1064
Operating Wavelength Range
nm
±10
Typ. Peak Isolation
dB
35
Min. Isolation in Band (at 25℃)
dB
30
Min. Transmission
%
90
Nominal Output Beam Diameter
mm
8±1
Max. Peak Power
kW
50
Max. Optical Power (CW)
W
100,200,500
Min. Return Loss
dB
50
Fiber Type
-
LMA-GDF-20/25/30-250 ,20/400 fiber
Fiber Length(B)
m
>1.0
Armoured Length(A)
m
2.5 & 3.0
Tensile Load
kg
1
Operation Temperature
℃
0 ~ +50
Storage Temperature Range
℃
-20 ~ +75

Dimension



Order Information

ItemWavelengthOptical PowerFiber TypePackage DimensionsOutput Beam DiameterFiber Jacket on Input & Length (A)Fiber LengthConnector Type on in&out
HPCFMI-1064-1001=1064
S=Specify
 		50=50W
S=Specify		1=HI1060 fiber
2= LMA fiber
S=Specify		C–Circle Type
Q–Quadrate Type		08=8mm
S=Specify		C25–3mm=Loose Cable&2.5m Length
A25–3mm=3mm Armoured Cable&2.5m Length
B25–6mm=6mm Armoured Cable&2.5m Length		1=1m
S=Specify		N=None
S=Specify

评论

发表评论

此博客中的热门博文

Common Armored Fiber Optic Cables

  Armored fiber optic cables are often installed in a network for added mechanical protection, as they have extra reinforcing in the cable housing to prevent damage. Two types of armored fiber optic cables exist: interlocking and corrugated. Interlocking armor is an aluminum armor that is helically wrapped around the cable and found in indoor and indoor/outdoor cables. It offers ruggedness and superior crush resistance. Corrugated armor is a coated steel tape folded around the cable longitudinally. It is found in outdoor cables and offers extra mechanical and rodent protection.   The Structure of an Armored Fiber Optic Cable In basic armored fiber cable designs, the outer sleeve provides protection against wind, solvents, and abrasion. This outer sleeve is usually made of plastic such as polyethylene. The next layer between the sleeve and the inner jacket is an armoring layer of materials that are difficult to cut, chew, or bu
阅读全文

what the Differences Between FBT Splitter and PLC Splitter

  In FTTx and PON architectures, optical splitter plays an increasingly significant role to create a variety of point-to-multipoint fiber optic networks. But do you know what is a fiber optic splitter? In fact, a fiber optic splitter is a passive optical device that can split or separate an incident light beam into two or more light beams. Basically, there are two types of fiber splitter classified by their working principle: fused biconical taper splitter (FBT splitter) and planar lightwave circuit splitter (PLC splitter). You may have one question: what’s the difference between them and shall we use FBT or PLC splitter?   What Is FBT Splitter? FBT splitter is based on a traditional technology to weld several fiber together from side of the fiber. Fibers are aligned by heating for a specific location and length. Because the fused fibers are very fragile, they are protected by a glass tube made of epoxy and silica powder. And then a stainless steel tube covers the inner glass tu
阅读全文

Introduction of Optical Fiber Couplers and How Do They Work?

 What are optical fiber couplers? A fiber optic coupler can be defined as an optical component used with one or more input fibers and several output fibers in fiber optic systems. A coupler essentially puts two or more cores of fibers together to connect. The simple coupler is the fused fiber 2x2 coupler. Couplers are used as multiplexers that are resistant to certain wavelengths. A fiber output depends on the wavelength of light and the frequency of polarization. The fiber refractive index also plays a significant role in the performance. Let’s checkout how do optic couplers work to understand this better. How do fiber optic couplers work? Either fiber optic couplers separate optical signals into multiple paths or combine multiple signals in one direction. Optical signals are more complicated than electrical signals, making it more difficult to design optical couplers than their electrical copy. Unlike electrical currents, the optical signal consists of a stream of signal carriers, in
阅读全文