Raman-off gain 10dB FM-RA Series Raman Amplifier

Raman-off gain 10dB FM-RA Series Raman Amplifier

FM SKU#:SKU00239X
Model#:FM-RA-1550-10
MFG PART#:FM-RA-1550-10

 

Raman-off gain 10dB FM-RA Series Raman Amplifier
Raman-off gain 10dB FM-RA Series Raman Amplifier is high power Raman Amplifier which is used in low noise, Long span or high speed Optical Transmission system. Using transmission fiber as the gain medium to form distributed to enlarge, reduce system noise and will get best gain and noise index mix the our EDFA product.
Each Pump output power can be adjustable independently which is suitable for a variety network applications and to enlarge the bandwidth.
"Intelligent network management system. Perfectly network interface: Ethernet, RS-485 and RS-232 network，and the open network management interface ensure the connectivity with all other network management system. "

 

Features
  • Gain: 10dB
  • Connectors: SC/UPC, SC/APC, FC/UPC, FC/APC, LC/UPC, LC/APC, ST/UPC and ST/APC connectors are available
  • 1U 19” rack mount structure for easy installation
  • Redundancy hot swap power: 110V/220V mixed with 48V
  • Distributed low-noise amplification
  • Easy control and operate: Dual CPU process control Loops and the upper Interface respectively
  • Perfect network Management interface: Ethernet RS-485 and RS232
  • SNMP Network management Or provide SNMP Mib
  • Single channel, DWDM or C+L band is available
  • Intelligent temperature control system: power consumption and hot Radiation reduce 30% than common products
  • Pump polarization-Independent design
  • Compatible with Bellcore GR-1312-CORE
  • High stability and reliability
  • 10 years of operation life
  • 3 years warranty
  • OEM is available

Application

  • SDH, ATM telecom long distance optical Transmission
  • Analog digital TV long distance Optical Transmission system
  • Long span system
  • 10G, 40G system

Mechanical Structure


Structure Example


Specification

ParametersSymbolMinTypMaxUnit
Operation Wavelengthλc152515501565nm
Pump wavelengthλp142511505nm
Pump output powerPo 5001000mW
On/OFF GainG6 14dB
Gain FlatnessFL 1 dB
Polarization Dependent GainPDG  0.3dB
PMDPMD  0.3ps
Relative Noise FigureNF  0dB
Power SupplyVps85/170110/220132/264VAC
ConsumptionP  18W
Operating TemperatureTw-5 60℃
Storage TemperatureTs-40 80℃
Humidity 10 85%

评论

发表评论

此博客中的热门博文

Common Armored Fiber Optic Cables

  Armored fiber optic cables are often installed in a network for added mechanical protection, as they have extra reinforcing in the cable housing to prevent damage. Two types of armored fiber optic cables exist: interlocking and corrugated. Interlocking armor is an aluminum armor that is helically wrapped around the cable and found in indoor and indoor/outdoor cables. It offers ruggedness and superior crush resistance. Corrugated armor is a coated steel tape folded around the cable longitudinally. It is found in outdoor cables and offers extra mechanical and rodent protection.   The Structure of an Armored Fiber Optic Cable In basic armored fiber cable designs, the outer sleeve provides protection against wind, solvents, and abrasion. This outer sleeve is usually made of plastic such as polyethylene. The next layer between the sleeve and the inner jacket is an armoring layer of materials that are difficult to cut, chew, or bu
阅读全文

what the Differences Between FBT Splitter and PLC Splitter

  In FTTx and PON architectures, optical splitter plays an increasingly significant role to create a variety of point-to-multipoint fiber optic networks. But do you know what is a fiber optic splitter? In fact, a fiber optic splitter is a passive optical device that can split or separate an incident light beam into two or more light beams. Basically, there are two types of fiber splitter classified by their working principle: fused biconical taper splitter (FBT splitter) and planar lightwave circuit splitter (PLC splitter). You may have one question: what’s the difference between them and shall we use FBT or PLC splitter?   What Is FBT Splitter? FBT splitter is based on a traditional technology to weld several fiber together from side of the fiber. Fibers are aligned by heating for a specific location and length. Because the fused fibers are very fragile, they are protected by a glass tube made of epoxy and silica powder. And then a stainless steel tube covers the inner glass tu
阅读全文

Introduction of Optical Fiber Couplers and How Do They Work?

 What are optical fiber couplers? A fiber optic coupler can be defined as an optical component used with one or more input fibers and several output fibers in fiber optic systems. A coupler essentially puts two or more cores of fibers together to connect. The simple coupler is the fused fiber 2x2 coupler. Couplers are used as multiplexers that are resistant to certain wavelengths. A fiber output depends on the wavelength of light and the frequency of polarization. The fiber refractive index also plays a significant role in the performance. Let’s checkout how do optic couplers work to understand this better. How do fiber optic couplers work? Either fiber optic couplers separate optical signals into multiple paths or combine multiple signals in one direction. Optical signals are more complicated than electrical signals, making it more difficult to design optical couplers than their electrical copy. Unlike electrical currents, the optical signal consists of a stream of signal carriers, in
阅读全文