48x Gigabit SFP with 4x 10GbE SFP+ Switch S580048F4S

48x Gigabit SFP with 4x 10GbE SFP+ Switch S580048F4S

48xGigabit SFP with 4x10GbE SFP+ Switch S5800-48F4S



S5800-48F4S is high performance Ethernet switch to meet next generation Metro, Data Center and Enterprise Ethernet network requirements designed based on high-end scalable chipset with integration of Layer 2 to Layer 4 packet processing engine, traffic management and fabric interface.

S5800-48F4S is cost-effective Ethernet access and aggregation platform to Metro, Enterprise and Data Center application. It provides high port density with 48GE fixed port and adopts flexible modular design to support maximum 4x10G uplinks.

Switch ClassLayer2/3Non-blocking Throughput88Gbps
1-Gigabit SFP48Switching Capacity176Gbps
10-Gigabit SFP+4CPUCavium CN5010-500BG564-CP-G/500MHz
Typical/Max Power Draw75W/85WMax VLANs4K
100/1000 Mgmt Ports1Forwarding Rate132 Mpps
RS-232 Serial Ports1 (RJ-45)Flash Storage Memory32MB
USB Ports1Enclosure TypeRack-mountable 1U
Hot-swap Power Supplies2(1+1 redundancy)Dimensions (H x W x D)43.6x440x 400 mm
Hot-swappable Fans4(N+1 redundancy)Weight(With one PSU)6.3kg

Product Highlights





  • 48 SFP Ports
    48x100/1000 Base-X SFP Ethernet Ports.
  • 4 SFP+ Ports
    One 4x10GE SFP+ Card support up to 4 10G SFP+ transceivers.
  • Multi-Node Redundancy
    Dual power modules and Four fans for uninterrupted performance assurance.




Model Comparison






ImagePart NumberID#DescriptionPrice 
1G SFP Transceivers
SFP-GB-GE-T200571000BASE-T SFP Copper RJ-45 100m TransceiverUS$  16.00Add to Cart
SFP1G-SX-85298381000BASE-SX SFP 850nm 550m DOM TransceiverUS$  6.00Add to Cart
SFP1G-SX-31298481000BASE-SX SFP 1310nm 2km DOM TransceiverUS$  11.00Add to Cart
SFP1G-LX-31298491000BASE-LX/LH SFP 1310nm 10km DOM TransceiverUS$  7.00Add to Cart
SFP1G-EX-55298541000BASE-EX SFP 1550nm 40km DOM TransceiverUS$  24.00Add to Cart
SFP1G-ZX-55298561000BASE-ZX SFP 1550nm 80km DOM TransceiverUS$  24.00Add to Cart
10G SFP+ Transceivers
SFP-10GSR-855877310GBASE-SR SFP+ 850nm 300m DOM IND TransceiverUS$  16.00Add to Cart
SFP-10GLRM-311159010GBASE-LRM SFP+ 1310nm 220m DOM TransceiverUS$  34.00Add to Cart
SFP-10GLR-315877410GBASE-LR SFP+ 1310nm 10km DOM IND TransceiverUS$  34.00Add to Cart
SFP-10GER-551159210GBASE-ER SFP+ 1550nm 40km DOM TransceiverUS$  180.00Add to Cart
SFP-10GZR-551159510GBASE-ZR SFP+ 1550nm 80km DOM TransceiverUS$  400.00Add to Cart
SFP-10GZRC-552979910G SFP+ 1550nm 100km DOM TransceiverUS$  500.00Add to Cart

评论

发表评论

此博客中的热门博文

Common Armored Fiber Optic Cables

  Armored fiber optic cables are often installed in a network for added mechanical protection, as they have extra reinforcing in the cable housing to prevent damage. Two types of armored fiber optic cables exist: interlocking and corrugated. Interlocking armor is an aluminum armor that is helically wrapped around the cable and found in indoor and indoor/outdoor cables. It offers ruggedness and superior crush resistance. Corrugated armor is a coated steel tape folded around the cable longitudinally. It is found in outdoor cables and offers extra mechanical and rodent protection.   The Structure of an Armored Fiber Optic Cable In basic armored fiber cable designs, the outer sleeve provides protection against wind, solvents, and abrasion. This outer sleeve is usually made of plastic such as polyethylene. The next layer between the sleeve and the inner jacket is an armoring layer of materials that are difficult to cut, chew, or bu
阅读全文

what the Differences Between FBT Splitter and PLC Splitter

  In FTTx and PON architectures, optical splitter plays an increasingly significant role to create a variety of point-to-multipoint fiber optic networks. But do you know what is a fiber optic splitter? In fact, a fiber optic splitter is a passive optical device that can split or separate an incident light beam into two or more light beams. Basically, there are two types of fiber splitter classified by their working principle: fused biconical taper splitter (FBT splitter) and planar lightwave circuit splitter (PLC splitter). You may have one question: what’s the difference between them and shall we use FBT or PLC splitter?   What Is FBT Splitter? FBT splitter is based on a traditional technology to weld several fiber together from side of the fiber. Fibers are aligned by heating for a specific location and length. Because the fused fibers are very fragile, they are protected by a glass tube made of epoxy and silica powder. And then a stainless steel tube covers the inner glass tu
阅读全文

Introduction of Optical Fiber Couplers and How Do They Work?

 What are optical fiber couplers? A fiber optic coupler can be defined as an optical component used with one or more input fibers and several output fibers in fiber optic systems. A coupler essentially puts two or more cores of fibers together to connect. The simple coupler is the fused fiber 2x2 coupler. Couplers are used as multiplexers that are resistant to certain wavelengths. A fiber output depends on the wavelength of light and the frequency of polarization. The fiber refractive index also plays a significant role in the performance. Let’s checkout how do optic couplers work to understand this better. How do fiber optic couplers work? Either fiber optic couplers separate optical signals into multiple paths or combine multiple signals in one direction. Optical signals are more complicated than electrical signals, making it more difficult to design optical couplers than their electrical copy. Unlike electrical currents, the optical signal consists of a stream of signal carriers, in
阅读全文