What Is the Difference Between Ethernet & Patch Cables?

by www.fiber-mart.com
Ethernet and patch cables are usually referred to interchangeably, although there can be differences between the two. A patch cable is a generic term that can be used for multiple types of cabling (such as telephone or audio/video, in addition to Ethernet).
 
Ethernet Is a Protocol
While eight-conductor Ethernet cables with RJ-45 plugs are extremely common (these are the cables that look like over-sized phone cords), Ethernet itself is a protocol standard that defines the way that bits of information travel over a particular medium. The two most common cabled versions of Ethernet are traditional copper cables and fiber-optic cables.
 
Patch Cables
Most standard copper Ethernet cables are referred to as patch cables. However, ordinary phone cords can be considered patch cables, as well as the RCA and HDMI cables that connect a home TV and stereo system together.
 
Types
 
Ethernet cables that serve different purposes are called by different names.
Different Ethernet cables have different names, with "patch cables" being the most common. Some of the differences include the length of the cable as well as the purpose. For example, an Ethernet connection that is designed for speed and/or great distance can be referred to as a "backbone" or "long haul," even though it may use the exact same type of copper cable that a patch cable uses.

评论

发表评论

此博客中的热门博文

Common Armored Fiber Optic Cables

  Armored fiber optic cables are often installed in a network for added mechanical protection, as they have extra reinforcing in the cable housing to prevent damage. Two types of armored fiber optic cables exist: interlocking and corrugated. Interlocking armor is an aluminum armor that is helically wrapped around the cable and found in indoor and indoor/outdoor cables. It offers ruggedness and superior crush resistance. Corrugated armor is a coated steel tape folded around the cable longitudinally. It is found in outdoor cables and offers extra mechanical and rodent protection.   The Structure of an Armored Fiber Optic Cable In basic armored fiber cable designs, the outer sleeve provides protection against wind, solvents, and abrasion. This outer sleeve is usually made of plastic such as polyethylene. The next layer between the sleeve and the inner jacket is an armoring layer of materials that are difficult to cut, chew, or bu
阅读全文

what the Differences Between FBT Splitter and PLC Splitter

  In FTTx and PON architectures, optical splitter plays an increasingly significant role to create a variety of point-to-multipoint fiber optic networks. But do you know what is a fiber optic splitter? In fact, a fiber optic splitter is a passive optical device that can split or separate an incident light beam into two or more light beams. Basically, there are two types of fiber splitter classified by their working principle: fused biconical taper splitter (FBT splitter) and planar lightwave circuit splitter (PLC splitter). You may have one question: what’s the difference between them and shall we use FBT or PLC splitter?   What Is FBT Splitter? FBT splitter is based on a traditional technology to weld several fiber together from side of the fiber. Fibers are aligned by heating for a specific location and length. Because the fused fibers are very fragile, they are protected by a glass tube made of epoxy and silica powder. And then a stainless steel tube covers the inner glass tu
阅读全文

Introduction of Optical Fiber Couplers and How Do They Work?

 What are optical fiber couplers? A fiber optic coupler can be defined as an optical component used with one or more input fibers and several output fibers in fiber optic systems. A coupler essentially puts two or more cores of fibers together to connect. The simple coupler is the fused fiber 2x2 coupler. Couplers are used as multiplexers that are resistant to certain wavelengths. A fiber output depends on the wavelength of light and the frequency of polarization. The fiber refractive index also plays a significant role in the performance. Let’s checkout how do optic couplers work to understand this better. How do fiber optic couplers work? Either fiber optic couplers separate optical signals into multiple paths or combine multiple signals in one direction. Optical signals are more complicated than electrical signals, making it more difficult to design optical couplers than their electrical copy. Unlike electrical currents, the optical signal consists of a stream of signal carriers, in
阅读全文