12 Fibers 9/125μm Single-mode Multi-Core Indoor Ribbon Flat Fiber Optic Cable-GJFDBV

FM SKU#:SKU00750E2
Model#:GJFDBV-12B1.1
MFG PART#:

This kind of cable is suitable for Indoor cabling and access network use.

Cable structure is single-mode or multimode optical fiber placed in the middle of the two non-metallic reinforcement layer of flame-retardant polyethylene extruded after ethylene sheath (LSZH).The cable structure is compact and has excellent high temperature performance, with superior tensile strength, fiber reinforcements with excellent bending properties, with Low Smoke Zero Halogen sheath material with excellent flame retardance.

Item Details

  • Fiber Count: 12 Fibers

  • Fiber Type: Single-mode G.652D

  • Outer Jacket: LSZH

Cable Structure




 
Features
  • Good mechanical and environmental performance.
  • Soft, flexible, and continue to facilitate.
  • Support large-capacity data transmission, 4-12 Fibers are available.
  • LSZH Jacket keep the cable a good performance of fire-resistant.
  • Aramid yarn ensure the cable a superior performance of tensile strength.
 Application
  • FTTH network
  • Interconnect cables
  • Indoor and outdoor point to point application
  • Direct connectorization
  • Internal wiring in cable trays

Package

Package 1Package 2
Package 1: usually for indoor cable, light weight cables.
Package 2: usually for outdoor cable, heavy weight cables
Usually for each roll, the cable length is 2km, but we could provide customized package for different cable lengths.

Mark


Usually we only attach Test Report on the out package of the cable, but we could also mark as your requirements, such as:
1. Company Name
2. Cross /Net weight
3. Drum No: XX
4. Cable Length : XX

Cable production throughout the chart

Fiber-Mart


Cable CountSheath WidthSheath ThicknessCable WeightTensile LoadCrush LoadBend RadiusStorage
Temperature
 （mm)（mm)(kg/km)S(N)L(N)S(N)L(N)S(mm)L(mm)（℃）
23.52.515.01500600100030020D10D-20°C~+60°C
43.52.515.01500600100030020D10D-20°C~+60°C
64.02.517.01500600100030020D10D-20°C~+60°C
84.52.217.01500600100030020D10D-20°C~+60°C
124.82.220.01500600100030020D10D-20°C~+60°C


 G.65250/125µm62.5/125µm
Attenuation
(+20°C) (dB/km)		@850nm ≤3.0≤3.0
@1300nm ≤1.0≤1.0
@1310nm≤0.36  
@1550nm≤0.22  
Bandwidth (Class A) (MHz·km)@850nm ≥600≥200
@1300nm ≥1200≥600
Numerical Aperture 0.200±0.015NA0.275±0.015NA
Cable Cut-off Wavelength λcc (nm)≤1260 

评论

发表评论

此博客中的热门博文

Common Armored Fiber Optic Cables

  Armored fiber optic cables are often installed in a network for added mechanical protection, as they have extra reinforcing in the cable housing to prevent damage. Two types of armored fiber optic cables exist: interlocking and corrugated. Interlocking armor is an aluminum armor that is helically wrapped around the cable and found in indoor and indoor/outdoor cables. It offers ruggedness and superior crush resistance. Corrugated armor is a coated steel tape folded around the cable longitudinally. It is found in outdoor cables and offers extra mechanical and rodent protection.   The Structure of an Armored Fiber Optic Cable In basic armored fiber cable designs, the outer sleeve provides protection against wind, solvents, and abrasion. This outer sleeve is usually made of plastic such as polyethylene. The next layer between the sleeve and the inner jacket is an armoring layer of materials that are difficult to cut, chew, or bu
阅读全文

what the Differences Between FBT Splitter and PLC Splitter

  In FTTx and PON architectures, optical splitter plays an increasingly significant role to create a variety of point-to-multipoint fiber optic networks. But do you know what is a fiber optic splitter? In fact, a fiber optic splitter is a passive optical device that can split or separate an incident light beam into two or more light beams. Basically, there are two types of fiber splitter classified by their working principle: fused biconical taper splitter (FBT splitter) and planar lightwave circuit splitter (PLC splitter). You may have one question: what’s the difference between them and shall we use FBT or PLC splitter?   What Is FBT Splitter? FBT splitter is based on a traditional technology to weld several fiber together from side of the fiber. Fibers are aligned by heating for a specific location and length. Because the fused fibers are very fragile, they are protected by a glass tube made of epoxy and silica powder. And then a stainless steel tube covers the inner glass tu
阅读全文

Introduction of Optical Fiber Couplers and How Do They Work?

 What are optical fiber couplers? A fiber optic coupler can be defined as an optical component used with one or more input fibers and several output fibers in fiber optic systems. A coupler essentially puts two or more cores of fibers together to connect. The simple coupler is the fused fiber 2x2 coupler. Couplers are used as multiplexers that are resistant to certain wavelengths. A fiber output depends on the wavelength of light and the frequency of polarization. The fiber refractive index also plays a significant role in the performance. Let’s checkout how do optic couplers work to understand this better. How do fiber optic couplers work? Either fiber optic couplers separate optical signals into multiple paths or combine multiple signals in one direction. Optical signals are more complicated than electrical signals, making it more difficult to design optical couplers than their electrical copy. Unlike electrical currents, the optical signal consists of a stream of signal carriers, in
阅读全文