ST UPC Multimode Simplex 0.9mm Boot Size Fiber Optic Connector

FM SKU#:SKU00179E
Model#:OM1-STU-LCU-4F
MFG PART#:

ST-LC 4 Core OM1 62.5/125 Multimode Fiber Patch Cable

Fiber Patch Cables also known as fiber jumpers or fiber patch cords. Fiber optic patch cable is one of most commonly used components in fiber optic network. Fiber optic patch cords are used for linking equipment and components in the fiber optic network.
The Definition of 'mode' as in multimode refers to the transmitting mode of the fiber optic light in the fiber optic cable core, multimode transmits multiple light rays or modes simultaneously. Multimode fibre optic patch cord are with 50/125 or 62.5/125 fiber glass and is orange color.
Multi Core patch cable are refers to the 4 cores, 6 cores, 8 cores and 12 cores fiber patch cable. With Fiber-Mart good development, we can offer more and more competitive price on a relatively higher-end multi core patch cables.

Note:
1. The 4 cores, 6 cores, 8 cores and 12 cores fiber patch cable are unusual. If you need it, please feel free to enquiry us at sales@fiber-mart.com.
2. The default fiber diameter for breakout leg cable is 0.9mm,if you'd like to customize other types as 3.0mm,2.0mm, please kindly enquiry us.
 

Features

  • Multi-fiber channel options
  • Various option of fiber and connector types
  • Standard or custom configurations
  • Easy to use, easy to install and maintain
  • Low insertion loss and back reflection
  • Custom defined specifications
  • Environmentally stable
  • Complete with orange OFNR rated riser/jacket
  • 100% optically tested to ensure high performance
  • According to different requirements, 4 to 966 cores are available

Applications

  • FTTH, LAN, Test equipment, Military industry
  • CATV
  • Outside plant
  • Premise networks
  • Aerial distribution
  • Measuring equipments
  • Fiber optic communication system
  • Optical active component and equipment

Item information

  • Fiber: 4 Core 62.5/125 multimode Fiber patch cable
  • Connector: ST-LC Connectors at ends
  • Fiber : 4 Fibers
  • Color: Orange
  • Jacket: PVC/LSZH
  • Fiber O.D: 62.5µm
  • Cable O.D: 0.9mm. (If you'd like to customize other diameters as 2.0mm,3.0mm,please kindly enquiry us at sales@fiber-mart.com

Custom OEM

Fiber-Mart offer customization solutions as below:
  • Any Fiber Type- 10G OM4 optical fiber, 10G OM3 optical fiber, Single-mode 9/125 optical fiber, OM1 Multimode 62.5/125 optical fiber and OM2 Multimode 50/125 optical fiber for choice.
  • Any connectors- FC, ST, LC, SC, MTRJ, E2000, MU etc connectors for choice.
  • Any lengths- 1m, 2m, 3m, 4m ...100m... no limits.
  • Label or Logo customs- we can print customer logo on fiber patch cable at this position:

评论

发表评论

此博客中的热门博文

Common Armored Fiber Optic Cables

  Armored fiber optic cables are often installed in a network for added mechanical protection, as they have extra reinforcing in the cable housing to prevent damage. Two types of armored fiber optic cables exist: interlocking and corrugated. Interlocking armor is an aluminum armor that is helically wrapped around the cable and found in indoor and indoor/outdoor cables. It offers ruggedness and superior crush resistance. Corrugated armor is a coated steel tape folded around the cable longitudinally. It is found in outdoor cables and offers extra mechanical and rodent protection.   The Structure of an Armored Fiber Optic Cable In basic armored fiber cable designs, the outer sleeve provides protection against wind, solvents, and abrasion. This outer sleeve is usually made of plastic such as polyethylene. The next layer between the sleeve and the inner jacket is an armoring layer of materials that are difficult to cut, chew, or bu
阅读全文

what the Differences Between FBT Splitter and PLC Splitter

  In FTTx and PON architectures, optical splitter plays an increasingly significant role to create a variety of point-to-multipoint fiber optic networks. But do you know what is a fiber optic splitter? In fact, a fiber optic splitter is a passive optical device that can split or separate an incident light beam into two or more light beams. Basically, there are two types of fiber splitter classified by their working principle: fused biconical taper splitter (FBT splitter) and planar lightwave circuit splitter (PLC splitter). You may have one question: what’s the difference between them and shall we use FBT or PLC splitter?   What Is FBT Splitter? FBT splitter is based on a traditional technology to weld several fiber together from side of the fiber. Fibers are aligned by heating for a specific location and length. Because the fused fibers are very fragile, they are protected by a glass tube made of epoxy and silica powder. And then a stainless steel tube covers the inner glass tu
阅读全文

Introduction of Optical Fiber Couplers and How Do They Work?

 What are optical fiber couplers? A fiber optic coupler can be defined as an optical component used with one or more input fibers and several output fibers in fiber optic systems. A coupler essentially puts two or more cores of fibers together to connect. The simple coupler is the fused fiber 2x2 coupler. Couplers are used as multiplexers that are resistant to certain wavelengths. A fiber output depends on the wavelength of light and the frequency of polarization. The fiber refractive index also plays a significant role in the performance. Let’s checkout how do optic couplers work to understand this better. How do fiber optic couplers work? Either fiber optic couplers separate optical signals into multiple paths or combine multiple signals in one direction. Optical signals are more complicated than electrical signals, making it more difficult to design optical couplers than their electrical copy. Unlike electrical currents, the optical signal consists of a stream of signal carriers, in
阅读全文