20x 40GbE QSFP+ with 4x 100GbE QSFP28 Switch S805020Q4C

20x40GbE QSFP+ with 4x100GbE QSFP28 Switch S8050-20Q4C



The S8050-20Q4C reference design, the high-density 10G/40GE platform with native 100GE (4x25G SerDes) uplinks, supports multiple form factors and includes fiber-mart Open Switch Platform (OSP) reference software for Data Center/SDN/Openflow and enterprise applications.

S8050-20Q4C reference design provides a comprehensive solution for data center Spine/Leaf switches with highlighted network visibility features. It is also the first Terabit platform with carrier domain features like OAM and PTP enabled. The reference design is equipped with an advanced SDK package with productized CLI for customer to do SDK-level configuration and verification.

Switch ClassLayer2/3, Dater center, MetroNon-blocking Throughput1.2Tbps
40-Gigabit QSFP+20Switching Capacity2.4Tbps
100-Gigabit QSFP284CPUFreescale PowerPC P1010
Typical/Max Power Draw120W/160WSystem Memory2 GB
100/1000 Mgmt Ports1Flash Storage Memory2 GB
RS-232 Serial Ports1 (RJ-45)Packet Buffer Memory9 MB
USB Ports1Max VLANs4094
Packets/Second1200MppsMax MAC Entries128K
Jumbo Frames9600 BytesEnclosure TypeRack-mountable 1U
Hot-swap Power Supplies2(1+1 redundancy)Dimensions (H x W x D)43.6x440x470 mm
Hot-swappable Fans4(N+1 redundancy)Weight(With one PSU)8.3kg

Product Highlights





  • 20 QSFP+ Ports
    20x40GBASE QSFP+ Ethernet Ports.
  • 4 QSFP28 Ports
    4x100GBASE QSFP28 Ethernet Ports.
  • Multi-Node Redundancy
    Dual power modules and Four fans for uninterrupted performance assurance.




Model Comparison






ImagePart NumberID#DescriptionPrice 
40G QSFP+ Transceivers
QSFP-SR4-40G1793140GBASE-SR4 QSFP+ 850nm 150m MTP/MPO Transceiver for MMFUS$  55.00Add to Cart
QSFP-CSR4-40G3491240GBASE-CSR4 QSFP+ 850nm 400m MTP/MPO Transceiver for MMFUS$  70.00Add to Cart
QSFP-LX4-40G3520540GBASE-LX4 QSFP+ 1310nm 2km LC Transceiver for SMF&MMFUS$  340.00Add to Cart
QSFP-IR4-40G3491340GBASE-LR4L QSFP+ 1310nm 2km LC Transceiver for SMFUS$  340.00Add to Cart
QSFP-PIR4-40G3491740GBASE-PLRL4 QSFP+ 1310nm 1.4km MTP/MPO Transceiver for SMFUS$  220.00Add to Cart
QSFP-LR4-40G2442240GBASE-LR4 and OTU3 QSFP+ 1310nm 10km LC Transceiver for SMFUS$  340.00Add to Cart
QSFP-PLR4-40G3520940GBASE-PLR4 QSFP+ 1310nm 10km MTP/MPO Transceiver for SMFUS$  380.00Add to Cart
QSFP-ER4-40G3521140GBASE-ER4 and OTU3 QSFP+ 1310nm 40km LC Transceiver for SMFUS$  1,500.00Add to Cart
100G QSFP28 Transceivers
QSFP28-SR4-100G35182QSFP28 100GBASE-SR4 850nm 100m TransceiverUS$  400.00Add to Cart
QSFP28-LR4-100G39025QSFP28 100GBASE-LR4 1310nm 10km Transceiver

评论

发表评论

此博客中的热门博文

Common Armored Fiber Optic Cables

  Armored fiber optic cables are often installed in a network for added mechanical protection, as they have extra reinforcing in the cable housing to prevent damage. Two types of armored fiber optic cables exist: interlocking and corrugated. Interlocking armor is an aluminum armor that is helically wrapped around the cable and found in indoor and indoor/outdoor cables. It offers ruggedness and superior crush resistance. Corrugated armor is a coated steel tape folded around the cable longitudinally. It is found in outdoor cables and offers extra mechanical and rodent protection.   The Structure of an Armored Fiber Optic Cable In basic armored fiber cable designs, the outer sleeve provides protection against wind, solvents, and abrasion. This outer sleeve is usually made of plastic such as polyethylene. The next layer between the sleeve and the inner jacket is an armoring layer of materials that are difficult to cut, chew, or bu
阅读全文

what the Differences Between FBT Splitter and PLC Splitter

  In FTTx and PON architectures, optical splitter plays an increasingly significant role to create a variety of point-to-multipoint fiber optic networks. But do you know what is a fiber optic splitter? In fact, a fiber optic splitter is a passive optical device that can split or separate an incident light beam into two or more light beams. Basically, there are two types of fiber splitter classified by their working principle: fused biconical taper splitter (FBT splitter) and planar lightwave circuit splitter (PLC splitter). You may have one question: what’s the difference between them and shall we use FBT or PLC splitter?   What Is FBT Splitter? FBT splitter is based on a traditional technology to weld several fiber together from side of the fiber. Fibers are aligned by heating for a specific location and length. Because the fused fibers are very fragile, they are protected by a glass tube made of epoxy and silica powder. And then a stainless steel tube covers the inner glass tu
阅读全文

Introduction of Optical Fiber Couplers and How Do They Work?

 What are optical fiber couplers? A fiber optic coupler can be defined as an optical component used with one or more input fibers and several output fibers in fiber optic systems. A coupler essentially puts two or more cores of fibers together to connect. The simple coupler is the fused fiber 2x2 coupler. Couplers are used as multiplexers that are resistant to certain wavelengths. A fiber output depends on the wavelength of light and the frequency of polarization. The fiber refractive index also plays a significant role in the performance. Let’s checkout how do optic couplers work to understand this better. How do fiber optic couplers work? Either fiber optic couplers separate optical signals into multiple paths or combine multiple signals in one direction. Optical signals are more complicated than electrical signals, making it more difficult to design optical couplers than their electrical copy. Unlike electrical currents, the optical signal consists of a stream of signal carriers, in
阅读全文