FC-LC Simplex 10G OM4 Multimode Bend Safe Curl Fiber Patch cord

FM SKU#:SKU000082T
Model#:C-OM4-FC-LC-SX-FM
MFG PART#:

FC-LC Simplex 10G OM4 Multimode Bend Safe Curl Fiber Patch cord

Curl Fiber patch cord is retractable and usable in household wiring and wiring for movable parts of machines.The curl length(cm) and total length can be customed according to the customer’s requirements in Fiber-Mart.

The meters is point to the length of the cable after straightening. Bending diameter, Bending laps could be customized according to the total length you required.

Features

  • It can stretch several times without deteriorating the optical characteristics.
  • It can adjust length of cable
  • It is durable enough to be used for movable parts of machines and as a connecting cord for instruments.

Applications

  • Telecommunication, remote ONU & FTTX.
  • Data communication, CATV & test equipment.
  • Fast deployable local area network.
  • Fast In‐pipe wiring.
  • Robotic arm sensor communication

 

Specifications
Cable OD(mm)
2 or 3
Curl OD(mm)
18-22
Curl Length(cm)
According to the customer’s requirements
Total Length(cm)
According to the customer’s requirements
Faber Type
Bendsafe G657B
Cable Material
TPU（white）
Connector Type
FC/UPC,LC/UPC
Insertion Loss(dB)
<1dB for 100 turns
Reture Loss(dB)
UPC>=50,APC>=60
Operating Temperature(℃)
-40℃~+80℃
Storage Temperature(℃)
-45℃~+85℃
Fireproof standard
IEC 60332-3
RoHs 2002/95/EC directive

 

Sample Picture
 

 

Application Drawing

 

Mechanical Drawing






Fiber-Mart is an professional manufacturer & supplier of Curl Fiber Patch , it could be customized in any length. If you have any question about it,please feel free contact us at sales@fiber-mart.com

评论

发表评论

此博客中的热门博文

Common Armored Fiber Optic Cables

  Armored fiber optic cables are often installed in a network for added mechanical protection, as they have extra reinforcing in the cable housing to prevent damage. Two types of armored fiber optic cables exist: interlocking and corrugated. Interlocking armor is an aluminum armor that is helically wrapped around the cable and found in indoor and indoor/outdoor cables. It offers ruggedness and superior crush resistance. Corrugated armor is a coated steel tape folded around the cable longitudinally. It is found in outdoor cables and offers extra mechanical and rodent protection.   The Structure of an Armored Fiber Optic Cable In basic armored fiber cable designs, the outer sleeve provides protection against wind, solvents, and abrasion. This outer sleeve is usually made of plastic such as polyethylene. The next layer between the sleeve and the inner jacket is an armoring layer of materials that are difficult to cut, chew, or bu
阅读全文

what the Differences Between FBT Splitter and PLC Splitter

  In FTTx and PON architectures, optical splitter plays an increasingly significant role to create a variety of point-to-multipoint fiber optic networks. But do you know what is a fiber optic splitter? In fact, a fiber optic splitter is a passive optical device that can split or separate an incident light beam into two or more light beams. Basically, there are two types of fiber splitter classified by their working principle: fused biconical taper splitter (FBT splitter) and planar lightwave circuit splitter (PLC splitter). You may have one question: what’s the difference between them and shall we use FBT or PLC splitter?   What Is FBT Splitter? FBT splitter is based on a traditional technology to weld several fiber together from side of the fiber. Fibers are aligned by heating for a specific location and length. Because the fused fibers are very fragile, they are protected by a glass tube made of epoxy and silica powder. And then a stainless steel tube covers the inner glass tu
阅读全文

Introduction of Optical Fiber Couplers and How Do They Work?

 What are optical fiber couplers? A fiber optic coupler can be defined as an optical component used with one or more input fibers and several output fibers in fiber optic systems. A coupler essentially puts two or more cores of fibers together to connect. The simple coupler is the fused fiber 2x2 coupler. Couplers are used as multiplexers that are resistant to certain wavelengths. A fiber output depends on the wavelength of light and the frequency of polarization. The fiber refractive index also plays a significant role in the performance. Let’s checkout how do optic couplers work to understand this better. How do fiber optic couplers work? Either fiber optic couplers separate optical signals into multiple paths or combine multiple signals in one direction. Optical signals are more complicated than electrical signals, making it more difficult to design optical couplers than their electrical copy. Unlike electrical currents, the optical signal consists of a stream of signal carriers, in
阅读全文