3x1 Multimode Fiber High Power Combiners

FM SKU#:SKU00210G2
Model#:FM-PC-3X1-25W
MFG PART#:

 

3 × 1 Multimode Pump Combiners
3 × 1 Multimode Pump Combiners can be used for high power fiber laser and fiber amplifier. These devices can be used to combine the power from several multimode laser diodes with high coupling efficiency. We could provide 4X1, 7X1 Multimode Pump Combiners, also the configurations such as number of input fibers and different fiber types can be fully customized based upon request. If you need, please contact sales@fiber-mart.com.

Applications

  • High Power All-Fiber Lasers
  • High Power Fiber Amplifiers
  • Medical, industrial, defense

Features

  • High Signal Transfer Efficiency
  • High Pump Efficiency
  • Wavelength Insensitive>
  • Custom Configurations Available

Product specifications

  • Pump Operating Wavelength: 800-1000nm
  • Configuration: 1XN
  • Pump Fiber (core/clad, NA): 105/125, 0.15
  • Output Fiber (core/clad, NA): 200/240, 0.22
  • Power per Multimode Input: 25W
  • Fiber length: 0.8m
  • Package Dimension: Φ3.5xL40mm or 65x12x7.5mm for high power

Dimensional Drawing



Specification

ConfigurationPumpfiberOuputfiberMin.PumpEfficiencyMax.PowerHandlingPackage
2×1105/1250.15105/1250.2290%50W/legP32
3×1105/1250.15200/2200.2295%50W/legP32
3×1105/1250.22200/2200.2293%50W/legP32
4×1105/1250.15200/2200.2295%50W/legP32
4×1105/1250.22220/2420.2290%50W/legP32
4×1200/2200.22400/4400.2290%150W/legP32
7×1105/1250.15200/2200.2290%80W/legP32
7×1105/1250.15x/125DC93%80W/legP32
7×1105/1250.22x/125DC90%80W/legP32
7×1200/2200.22x/400DCF96%200W/legP32,P33
7×1220/2420.22x/400DCF96%200W/legP32,P33
19×1105/1250.15400/4400.2290%50W/legP32,P33
19×1105/1250.15x/200DC95%50W/legP32,P33
19×1105/1250.22x/250DC95%50W/legP32,P33
  • Remark: x=core dia., above are popular types, total >50 N×1 types are available.

评论

发表评论

此博客中的热门博文

Common Armored Fiber Optic Cables

  Armored fiber optic cables are often installed in a network for added mechanical protection, as they have extra reinforcing in the cable housing to prevent damage. Two types of armored fiber optic cables exist: interlocking and corrugated. Interlocking armor is an aluminum armor that is helically wrapped around the cable and found in indoor and indoor/outdoor cables. It offers ruggedness and superior crush resistance. Corrugated armor is a coated steel tape folded around the cable longitudinally. It is found in outdoor cables and offers extra mechanical and rodent protection.   The Structure of an Armored Fiber Optic Cable In basic armored fiber cable designs, the outer sleeve provides protection against wind, solvents, and abrasion. This outer sleeve is usually made of plastic such as polyethylene. The next layer between the sleeve and the inner jacket is an armoring layer of materials that are difficult to cut, chew, or bu
阅读全文

what the Differences Between FBT Splitter and PLC Splitter

  In FTTx and PON architectures, optical splitter plays an increasingly significant role to create a variety of point-to-multipoint fiber optic networks. But do you know what is a fiber optic splitter? In fact, a fiber optic splitter is a passive optical device that can split or separate an incident light beam into two or more light beams. Basically, there are two types of fiber splitter classified by their working principle: fused biconical taper splitter (FBT splitter) and planar lightwave circuit splitter (PLC splitter). You may have one question: what’s the difference between them and shall we use FBT or PLC splitter?   What Is FBT Splitter? FBT splitter is based on a traditional technology to weld several fiber together from side of the fiber. Fibers are aligned by heating for a specific location and length. Because the fused fibers are very fragile, they are protected by a glass tube made of epoxy and silica powder. And then a stainless steel tube covers the inner glass tu
阅读全文

Introduction of Optical Fiber Couplers and How Do They Work?

 What are optical fiber couplers? A fiber optic coupler can be defined as an optical component used with one or more input fibers and several output fibers in fiber optic systems. A coupler essentially puts two or more cores of fibers together to connect. The simple coupler is the fused fiber 2x2 coupler. Couplers are used as multiplexers that are resistant to certain wavelengths. A fiber output depends on the wavelength of light and the frequency of polarization. The fiber refractive index also plays a significant role in the performance. Let’s checkout how do optic couplers work to understand this better. How do fiber optic couplers work? Either fiber optic couplers separate optical signals into multiple paths or combine multiple signals in one direction. Optical signals are more complicated than electrical signals, making it more difficult to design optical couplers than their electrical copy. Unlike electrical currents, the optical signal consists of a stream of signal carriers, in
阅读全文