16E1 1+1 Fiber Back up Fiber Optical Multiplexers Singlemode Dual Fiber 20KM 19 Inch Rack

FM SKU#:SKU00063H
Model#:PDH-16E1-2-19
MFG PART#:

16E1 1+1 Fiber Back up Fiber Optical Multiplexers Singlemode Dual Fiber 20KM 19 Inch Rack

1+1 series fiber optical MUX is point-to-point optical transmission equipment developed based on ultra large scale integrated circuit. Have perfect alarm, high reliability and stabilization, low power consumption, high integration, easy installation and maintenance. The device is popularly with telecommunication operator. It is suitable in business for communication operator, government and kinds of entities.

Specifications

  • Single mode dual optical port-16 channels of E1 ports
  • Low power consumption
  • ISO certification
  • 1+1 fiber redandancy are provided
  • Optional Power redundancy to ensure stable system
  • Optional orderwire phone are provided
  • Optional function of ALS and SNMP

Main Feature

  • The 16E1 to fiber multiplexer
  • Provide function of 16E1 remote loop,fiber local loop,and 1 interface phone
  • Optional power 1+1 to ensure stable system
  • Two fiber two direction and single fiber two direction
  • 1+1 power,orderwire phone and the ALS and SNMP are optinal,Please state the requirement when in order
  • 16E1 PDH multiplexer realizes 1~16E1 transmission over fiber
  • E1 spur track loop back testing features, easy to be installed and maintenance
  • External dimensions: 19-inch rack (with distribution frames rack)
  • Provide the 1+1 fiber back up
  • Optical optional by customer 's requirement

Interface

E1 interface16E1 interface for 16E1
E1 rate: 2.048Mb/s±50ppm
Code type: HDB3
E1 Style: Pinfet
E1 comply with ITU-T G.703
Jitter compl y with ITU-T G.823 and G.742
E 1 with DB37. Be ab le to be with 75Ω (BNC) or 120Ω (RJ45) by adaptor in the accessory
FiberOptical rate: 42.240Mbit/s
optical style:4B5B
Default: dual fiber, single mode, 20km (40km optional)
connector: LC
wavelength:1310nm
Receiver sensitivity:≤ -38dBm(BER ≤ 10-11)

Power Requirements

  • Power Input: AC /DC optional
  • AC180V~240V
  • DC-36V~DC-72V
  • DC+20V~DC+36V
  • Power Consumption: <6Walt

Working Environment

  • Operating Temperature: 0℃ ~+50℃
  • Storage Temperature: -40℃ ~+70 ℃

评论

发表评论

此博客中的热门博文

Common Armored Fiber Optic Cables

  Armored fiber optic cables are often installed in a network for added mechanical protection, as they have extra reinforcing in the cable housing to prevent damage. Two types of armored fiber optic cables exist: interlocking and corrugated. Interlocking armor is an aluminum armor that is helically wrapped around the cable and found in indoor and indoor/outdoor cables. It offers ruggedness and superior crush resistance. Corrugated armor is a coated steel tape folded around the cable longitudinally. It is found in outdoor cables and offers extra mechanical and rodent protection.   The Structure of an Armored Fiber Optic Cable In basic armored fiber cable designs, the outer sleeve provides protection against wind, solvents, and abrasion. This outer sleeve is usually made of plastic such as polyethylene. The next layer between the sleeve and the inner jacket is an armoring layer of materials that are difficult to cut, chew, or bu
阅读全文

what the Differences Between FBT Splitter and PLC Splitter

  In FTTx and PON architectures, optical splitter plays an increasingly significant role to create a variety of point-to-multipoint fiber optic networks. But do you know what is a fiber optic splitter? In fact, a fiber optic splitter is a passive optical device that can split or separate an incident light beam into two or more light beams. Basically, there are two types of fiber splitter classified by their working principle: fused biconical taper splitter (FBT splitter) and planar lightwave circuit splitter (PLC splitter). You may have one question: what’s the difference between them and shall we use FBT or PLC splitter?   What Is FBT Splitter? FBT splitter is based on a traditional technology to weld several fiber together from side of the fiber. Fibers are aligned by heating for a specific location and length. Because the fused fibers are very fragile, they are protected by a glass tube made of epoxy and silica powder. And then a stainless steel tube covers the inner glass tu
阅读全文

Introduction of Optical Fiber Couplers and How Do They Work?

 What are optical fiber couplers? A fiber optic coupler can be defined as an optical component used with one or more input fibers and several output fibers in fiber optic systems. A coupler essentially puts two or more cores of fibers together to connect. The simple coupler is the fused fiber 2x2 coupler. Couplers are used as multiplexers that are resistant to certain wavelengths. A fiber output depends on the wavelength of light and the frequency of polarization. The fiber refractive index also plays a significant role in the performance. Let’s checkout how do optic couplers work to understand this better. How do fiber optic couplers work? Either fiber optic couplers separate optical signals into multiple paths or combine multiple signals in one direction. Optical signals are more complicated than electrical signals, making it more difficult to design optical couplers than their electrical copy. Unlike electrical currents, the optical signal consists of a stream of signal carriers, in
阅读全文