2 Ports SFP+ to XFP 10G OEO Converter Transponder w/full 3R Support

M SKU#:SKU60132J
Model#:2P-10G-3R-SX-FMOEO-2U
MFG PART#:

10G WDM Transponder OEO Converter comes with SFP+ and XFP ports, are linecard that can support the "Three Rs" to Retime, Regenerate and Reshape the optical signal.

Transponders are fiber-to-fiber media converters that convert wavelengths for Wavelength Division Multiplexing (WDM) applications.

Fiber-Mart transponders are protocol and rate-transparent fiber media converters that support SFP, SFP+ and XFP transceivers with data rates up to 11.32 Gpbs, and our transponders provide seamless integration of different fiber types by converting multi-mode fiber to single-mode fiber, and dual fiber to single-fiber.

Fiber-to-Fiber media converters extend network distance by converting wavelengths (1310 to 1550), amplifying optical power. Fiber-MART.Com transponders as re-generators are also an optical – electrical – optical (O-E-O) converter with electrical amplification of the signal by FEC to realize long distances fiber transmission.

Attention: This is a SFP+ to/from XFP OEO card for 2U Rack Chassis . It could be inserted into our 2U Multi-services unified platform Managed Chassis

Features

  • 10G Transparent Transponders for Ethernet, SDH , Fiber Channel, OTN, digital video, others.
  • 3R Repeater/Regenaration with FEC(Reed-Solomon Algorithms) for SDH, Ethernet and Fibre Channel.
  • Support DWDM/CWDM transceivers
  • Configurable operation mode.
  • Multiple chassis versions: Support 2U Rack(16 Slots) and independent use.
  • Compact chassis design.
  • Redundant and modular power supplies. AC and DC. In-service replaceable.
  • Modular filter and fan unit. In-service replaceable.
  • Powerful Network Management function Web, SNMP, Console, others

    • 10G OEO Card for 2U Unified Platefrom Chassis
    The 2U Unified Platefrom Chassis supports the 2-port 10G SFP+ to SFP+, 2-port 10G XFP to SFP+, 2-port 10G XFP to XFP, each card can coexist together in this 2U 17-slot Managed chassis.

    10G OEO Card for 1U Unified Platefrom Chassis



    Fiber-Mart can also provide 10G OEO Card for 1U Unified Platefrom Chassis. This kind of OEO cards has more ports comparing with the 2-port OEO cards which are supported by 2U Unified Platefrom Chassis. The 1U Unified Platefrom Chassis supports 4-port 10G XFP OEO card card and 8-port 10G SFP+ OEO card. Each card can coexist together in this 1U 2-slot Unified Platefrom Chassis.



    Specifications

    Performance DataTechnical Indexes
    Equipment function3R Repeater
    Transmission Speed10Gb/s ( 9.95Gb/s-11.35Gb/s )
    ProtocolsIEEE802.3ae (10Gbase-SR/LR/ER/ZR/LRM)
    Access Type10G LAN/10G WAN
    Interface TypeA Type: SFP+ To/From SFP+
    B Type: SFP+ To/From XFP
    C Type: XFP To/From XFP
    Transmission DistanceSFP+ module/XFP module: it depends on the transmission distance of the module
    Maximum Packet Forwarding Rate14,880,950/S
    Network management information:• Card type information
    • SFP+ fiber module detection
    • SFP+ fiber module DMI function ( Temperature, Voltage ,Optical power )
    • Link status detector
    • Enable/Disabled Loopback test function
    • Enable/Disable PRBS Generator and checker function
    • Rate select ( 10Gbase-Lan or Wan )
    • Remote card´s status monitor ( only in pairs )
    power requirementRack-mountable : AC 85 ～ 220V OR DC -48V
    Standalone: AC 220V OR DC -48V
    Power consumption: ≤6W
    Work EnvironmentOperating Temp: 0~ 50 ℃
    Storage Temp: -10~ 70 ℃
    Humidity: 5%~90% ( non-condensing )
    DimensionCard: 11.5mm (W ) × 78mm ( D )
    Standalone:156mm ( W ) × 128mm ( D ) × 32mm ( H )

    评论

    发表评论

    此博客中的热门博文

    Common Armored Fiber Optic Cables

      Armored fiber optic cables are often installed in a network for added mechanical protection, as they have extra reinforcing in the cable housing to prevent damage. Two types of armored fiber optic cables exist: interlocking and corrugated. Interlocking armor is an aluminum armor that is helically wrapped around the cable and found in indoor and indoor/outdoor cables. It offers ruggedness and superior crush resistance. Corrugated armor is a coated steel tape folded around the cable longitudinally. It is found in outdoor cables and offers extra mechanical and rodent protection.   The Structure of an Armored Fiber Optic Cable In basic armored fiber cable designs, the outer sleeve provides protection against wind, solvents, and abrasion. This outer sleeve is usually made of plastic such as polyethylene. The next layer between the sleeve and the inner jacket is an armoring layer of materials that are difficult to cut, chew, or bu
    阅读全文

    what the Differences Between FBT Splitter and PLC Splitter

      In FTTx and PON architectures, optical splitter plays an increasingly significant role to create a variety of point-to-multipoint fiber optic networks. But do you know what is a fiber optic splitter? In fact, a fiber optic splitter is a passive optical device that can split or separate an incident light beam into two or more light beams. Basically, there are two types of fiber splitter classified by their working principle: fused biconical taper splitter (FBT splitter) and planar lightwave circuit splitter (PLC splitter). You may have one question: what’s the difference between them and shall we use FBT or PLC splitter?   What Is FBT Splitter? FBT splitter is based on a traditional technology to weld several fiber together from side of the fiber. Fibers are aligned by heating for a specific location and length. Because the fused fibers are very fragile, they are protected by a glass tube made of epoxy and silica powder. And then a stainless steel tube covers the inner glass tu
    阅读全文

    Introduction of Optical Fiber Couplers and How Do They Work?

     What are optical fiber couplers? A fiber optic coupler can be defined as an optical component used with one or more input fibers and several output fibers in fiber optic systems. A coupler essentially puts two or more cores of fibers together to connect. The simple coupler is the fused fiber 2x2 coupler. Couplers are used as multiplexers that are resistant to certain wavelengths. A fiber output depends on the wavelength of light and the frequency of polarization. The fiber refractive index also plays a significant role in the performance. Let’s checkout how do optic couplers work to understand this better. How do fiber optic couplers work? Either fiber optic couplers separate optical signals into multiple paths or combine multiple signals in one direction. Optical signals are more complicated than electrical signals, making it more difficult to design optical couplers than their electrical copy. Unlike electrical currents, the optical signal consists of a stream of signal carriers, in
    阅读全文