SFP to 16x10/100Base-T RJ-45 Industrial Managed Media Converter

4x10/100/1000Base-X SFP to 16x10/100Base-T RJ-45 Industrial Managed Media Converter

Industrial Managed Media Converter
Media converters can be used anywhere in the network to integrate newer technology with existing equipment to support new applications, technologies and future growth. Instead of costly, across-the-board upgrades, media converters can extend the productive life of the existing cabling as well as the active equipment.

Fiber-Mart supply 10/100Base Ethernet Fiber Media Converters, 1000Base Gigabit Fiber Media Converter, SFP Fiber Media Converter, Industrial managed Media Converter, Managed Media Converter, POE media Converter, options in singlemode dual fiber, multimode dual fiber and singlemode single fiber. We also supply Media Converters Chassis, like 14 slot media converter chassis and 16 slot media converter chassis, used to manage the various media converters.
 

Key Features

  • 4 SFP 10/100/1000 Ports, 10/100Mbps auto-negotiation UTP Ports
  • Supports Full/Half Duplex, auto-negotiation, MDI/MDI-X on TX ports
  • Support Web Management
  • Support Vlan and QoS
  • Support OP Ring Protection (OPRP) and recovery within 30ms
  • Relay alarm for port breakdown
  • Reliable and stable performance
  • Free fall, Shock and Vibration Stability
  • Standard: IEEE802.3, IEEE802.3u, IEEE802.3x, IEEE802.3z, 10/100Base-TX, 100Base-FX, 10/100/1000Base-TX, 1000Base-FX/LX

Specifications

Media Converter

The Industrial web managed media converter enables network administrators to easily monitor and setup the converter, the transmission speed and duplex through web browsers. Build an ISP network solution of FTTH (Fiber to the Home), FTTC (Fiber to the Curb) for ISPs, or FTTB (Fiber to the Building) for small office network environment in the enterprises.

Note: Port Base VLAN is optional, please contact sales@fiber-mart.com for more details.
  • MAC address: 8K
  • UTP port: 16-ports RJ45
  • UTP Rate: 10/100Mbps
  • UTP cable: Cat. 5 (the max distance up to 100m)
  • Multimode Fiber: 50/125, 62.5/125μm(the max distance up to 224/550m)
  • Single-mode Fiber:9/125μm single-mode cable, provides long distance for 10/15/20/30/40/50/60/70/120km (very on fiber transceiver or SFP module)
  • Input Voltage: 18- 36V DC, Redundant dual power input
  • Operation Temperature: -10 ℃~60 ℃(Humidity: 5~90% non-condensing)
  • Storage Environment: -20℃~+85℃ (Humidity: 5~90% non-condensing)

评论

发表评论

此博客中的热门博文

Common Armored Fiber Optic Cables

  Armored fiber optic cables are often installed in a network for added mechanical protection, as they have extra reinforcing in the cable housing to prevent damage. Two types of armored fiber optic cables exist: interlocking and corrugated. Interlocking armor is an aluminum armor that is helically wrapped around the cable and found in indoor and indoor/outdoor cables. It offers ruggedness and superior crush resistance. Corrugated armor is a coated steel tape folded around the cable longitudinally. It is found in outdoor cables and offers extra mechanical and rodent protection.   The Structure of an Armored Fiber Optic Cable In basic armored fiber cable designs, the outer sleeve provides protection against wind, solvents, and abrasion. This outer sleeve is usually made of plastic such as polyethylene. The next layer between the sleeve and the inner jacket is an armoring layer of materials that are difficult to cut, chew, or bu
阅读全文

what the Differences Between FBT Splitter and PLC Splitter

  In FTTx and PON architectures, optical splitter plays an increasingly significant role to create a variety of point-to-multipoint fiber optic networks. But do you know what is a fiber optic splitter? In fact, a fiber optic splitter is a passive optical device that can split or separate an incident light beam into two or more light beams. Basically, there are two types of fiber splitter classified by their working principle: fused biconical taper splitter (FBT splitter) and planar lightwave circuit splitter (PLC splitter). You may have one question: what’s the difference between them and shall we use FBT or PLC splitter?   What Is FBT Splitter? FBT splitter is based on a traditional technology to weld several fiber together from side of the fiber. Fibers are aligned by heating for a specific location and length. Because the fused fibers are very fragile, they are protected by a glass tube made of epoxy and silica powder. And then a stainless steel tube covers the inner glass tu
阅读全文

Introduction of Optical Fiber Couplers and How Do They Work?

 What are optical fiber couplers? A fiber optic coupler can be defined as an optical component used with one or more input fibers and several output fibers in fiber optic systems. A coupler essentially puts two or more cores of fibers together to connect. The simple coupler is the fused fiber 2x2 coupler. Couplers are used as multiplexers that are resistant to certain wavelengths. A fiber output depends on the wavelength of light and the frequency of polarization. The fiber refractive index also plays a significant role in the performance. Let’s checkout how do optic couplers work to understand this better. How do fiber optic couplers work? Either fiber optic couplers separate optical signals into multiple paths or combine multiple signals in one direction. Optical signals are more complicated than electrical signals, making it more difficult to design optical couplers than their electrical copy. Unlike electrical currents, the optical signal consists of a stream of signal carriers, in
阅读全文