Compact Booster EDFA Module for CATV System

23dBm Output Compact Booster EDFA Module for CATV System

This Compact Booster EDFA Module for CATV System provides high quality performance in reliability, noise level and output power. It is an ideal building block for photonic subsystems and OEM system integration. Four different control modes (APC, AGC, ATC and ACC) offer maximum flexibility in meeting different system requirements. Pump laser protection and alarms are equipped to ensure the reliabilty and safety of the device.
EDFA Module for CATV System
The module is designed for optical communication and CATV systems. Compact footprint makes it easy to be installed where it is needed, adding to flexibility in network design. To achieve high performance, world brand pump lasers and erbium-doped fibers are used; optical isolators are added at both input and output. It requires only a single 5V DC power supplyfor operation.

The optical circuit design especially for Analog CATV system as follows:
(1) Low noise ensure better CNR for Analog system is sensitive for noise.
(2) Good Spectral flatness in the operating signal to ensure better CSO.
(3) Good Spectral flatness in whole C- bands to fit the upgrade in future NGB.

Features

  • OEM is optional
  • Single 5V DC operation
  • Output Power: 23dBm
  • Input Power: -3~10dBm
  • Extremely low CSO: <-70dBc
  • Dimension: 150mm*125mm*19mm
  • Wide range of working temperature
  • APC, AGC, ATC and ACC control modes
  • Low noise figure: less than 4.5 dB at 0dBm input
  • High stability and reliability: MTBF＞100000 hours
  • Perfect status monitoring interface: RS-232 or RS-485

Application

  • Laboratory
  • CATV Networks
  • Booster amplifier
  • Fiber Optic Sensors
  • Optical communications
  • Optical distributed system
  • Video optical transmission system
  • Rack mount optical amplify system

Mechanical Dimension

150×125×19mm

Order Information


CategoryStructureApplicationInput PowerOutput PowerOutput portVoltageInterface
M: Module10: Mechanical Dimension:
150×125×19mm		2: Fiber Amplifier1: -3~10dBm
9: other		13: 13dBm
…
24: 24dBm		1: 1port

2: 2ports		7: 5V DC
8: 3.3V DC		1: SC/UPC
2: SC/APC
3: FC/UPC
4: FC/APC
5: LC/UPC
6: LC/APC

评论

发表评论

此博客中的热门博文

Common Armored Fiber Optic Cables

  Armored fiber optic cables are often installed in a network for added mechanical protection, as they have extra reinforcing in the cable housing to prevent damage. Two types of armored fiber optic cables exist: interlocking and corrugated. Interlocking armor is an aluminum armor that is helically wrapped around the cable and found in indoor and indoor/outdoor cables. It offers ruggedness and superior crush resistance. Corrugated armor is a coated steel tape folded around the cable longitudinally. It is found in outdoor cables and offers extra mechanical and rodent protection.   The Structure of an Armored Fiber Optic Cable In basic armored fiber cable designs, the outer sleeve provides protection against wind, solvents, and abrasion. This outer sleeve is usually made of plastic such as polyethylene. The next layer between the sleeve and the inner jacket is an armoring layer of materials that are difficult to cut, chew, or bu
阅读全文

what the Differences Between FBT Splitter and PLC Splitter

  In FTTx and PON architectures, optical splitter plays an increasingly significant role to create a variety of point-to-multipoint fiber optic networks. But do you know what is a fiber optic splitter? In fact, a fiber optic splitter is a passive optical device that can split or separate an incident light beam into two or more light beams. Basically, there are two types of fiber splitter classified by their working principle: fused biconical taper splitter (FBT splitter) and planar lightwave circuit splitter (PLC splitter). You may have one question: what’s the difference between them and shall we use FBT or PLC splitter?   What Is FBT Splitter? FBT splitter is based on a traditional technology to weld several fiber together from side of the fiber. Fibers are aligned by heating for a specific location and length. Because the fused fibers are very fragile, they are protected by a glass tube made of epoxy and silica powder. And then a stainless steel tube covers the inner glass tu
阅读全文

Introduction of Optical Fiber Couplers and How Do They Work?

 What are optical fiber couplers? A fiber optic coupler can be defined as an optical component used with one or more input fibers and several output fibers in fiber optic systems. A coupler essentially puts two or more cores of fibers together to connect. The simple coupler is the fused fiber 2x2 coupler. Couplers are used as multiplexers that are resistant to certain wavelengths. A fiber output depends on the wavelength of light and the frequency of polarization. The fiber refractive index also plays a significant role in the performance. Let’s checkout how do optic couplers work to understand this better. How do fiber optic couplers work? Either fiber optic couplers separate optical signals into multiple paths or combine multiple signals in one direction. Optical signals are more complicated than electrical signals, making it more difficult to design optical couplers than their electrical copy. Unlike electrical currents, the optical signal consists of a stream of signal carriers, in
阅读全文