Introduction of OP-2000C Fiber Optic Polishing Machine

Introduction of OP-2000C Fiber Optic Polishing Machine

OP-2000C Fiber Optic Polishing Machine
optical Fiber Polisher, OP-2000C is corner pressure polshing machine for fiber connectors.
 
Key Features:
Can polish 24~40 connector at same time, very applicable to bulk production.

Polish process using liquid crystal display, can display the time polish, polish speed and polish times, making the process easier to control quality.

Polish fixture with square pressure, the pressure from the elastic cushion into the decision to ground the pressure volume, simple products with high precision and consistent.

post comply with IEC standards can produce geometric face.
planetary orbit by way of Research MoIPC using the new fixture (each mortise, independent compression) technology allows a higher passing rate of industrial production, and is willing to either one or 24 polish connector,polish effects the same operation and high flexbility.

MU and LC connector maximum polish 24 connectors,SC,FC,ST up to 20~40
Treatment with high quality stainless steel had to make the machine to maintain a very high accuracy and usage 

Application for high volume production, and the polishing jig is fixed with 4 points, the polishing pressure is determines by coil spring and elastic cushion.    

Designed for polishing manner with planet tray.   
Using a new I.P.C jig technology (every ferrule is pressed singly) and making the finished yield rate much higher.    
Dual APC & PC polishing and Accommodating most styles of connectors   

High efficiency to deal with all kinds of connectors. The maximum polishing quantity for MU and LC connectors is 24 pcs; And maximum polishing quantity for SC, FC and ST connectors is 20 pcs.   

The polisher was made by high quality stainless steel with heat treatment and it is high accuracy and durability.   
Quick to change jigs,  Easy and flexible to operate.   

APC return loss as low as -70 dB,  UPC return loss as low as -60 dB, Insertion loss 0.2 dB typical   
Super centering accuracy   
OP-1200C Fiber Optic Polishing Machine
Excellent connector endface polishing quality
 
https://youtu.be/SzS9oSuy5xs

Specifications: 
 
Type  
High Volume, Installation
Pressure Source
Coil Spring
Polishing Capacity (max)
20 connectors for FC, SC and ST  / 24 connectors for MU/LC 
Dimensions
230 x 255 x 230mm
Weight
23.5 kg
Input Voltage
100-120VAC, 50/60Hz or 220-240VAC, 50/60Hz
Application
2.5mm PC, APC  /  12.5mm PC, APC  /  MT, mini-MT

评论

发表评论

此博客中的热门博文

Common Armored Fiber Optic Cables

  Armored fiber optic cables are often installed in a network for added mechanical protection, as they have extra reinforcing in the cable housing to prevent damage. Two types of armored fiber optic cables exist: interlocking and corrugated. Interlocking armor is an aluminum armor that is helically wrapped around the cable and found in indoor and indoor/outdoor cables. It offers ruggedness and superior crush resistance. Corrugated armor is a coated steel tape folded around the cable longitudinally. It is found in outdoor cables and offers extra mechanical and rodent protection.   The Structure of an Armored Fiber Optic Cable In basic armored fiber cable designs, the outer sleeve provides protection against wind, solvents, and abrasion. This outer sleeve is usually made of plastic such as polyethylene. The next layer between the sleeve and the inner jacket is an armoring layer of materials that are difficult to cut, chew, or bu
阅读全文

what the Differences Between FBT Splitter and PLC Splitter

  In FTTx and PON architectures, optical splitter plays an increasingly significant role to create a variety of point-to-multipoint fiber optic networks. But do you know what is a fiber optic splitter? In fact, a fiber optic splitter is a passive optical device that can split or separate an incident light beam into two or more light beams. Basically, there are two types of fiber splitter classified by their working principle: fused biconical taper splitter (FBT splitter) and planar lightwave circuit splitter (PLC splitter). You may have one question: what’s the difference between them and shall we use FBT or PLC splitter?   What Is FBT Splitter? FBT splitter is based on a traditional technology to weld several fiber together from side of the fiber. Fibers are aligned by heating for a specific location and length. Because the fused fibers are very fragile, they are protected by a glass tube made of epoxy and silica powder. And then a stainless steel tube covers the inner glass tu
阅读全文

Introduction of Optical Fiber Couplers and How Do They Work?

 What are optical fiber couplers? A fiber optic coupler can be defined as an optical component used with one or more input fibers and several output fibers in fiber optic systems. A coupler essentially puts two or more cores of fibers together to connect. The simple coupler is the fused fiber 2x2 coupler. Couplers are used as multiplexers that are resistant to certain wavelengths. A fiber output depends on the wavelength of light and the frequency of polarization. The fiber refractive index also plays a significant role in the performance. Let’s checkout how do optic couplers work to understand this better. How do fiber optic couplers work? Either fiber optic couplers separate optical signals into multiple paths or combine multiple signals in one direction. Optical signals are more complicated than electrical signals, making it more difficult to design optical couplers than their electrical copy. Unlike electrical currents, the optical signal consists of a stream of signal carriers, in
阅读全文