What is Direct Attached Cables(DAC)

Direct Attach Cables(DAC) are a form of shielded high-speed cable with SFP connectors on either end (SFP, SFP+, QSFP, QSFP+ modules). These are generally used to connect switches to routers, storage or servers within the same rack or adjacent racks. DAC cables are becoming increasingly popular, not just within data centers but within wider areas of the industry, as they offer a very cost-effective (almost half than using transceiver and fiber cables separately), efficient and easy way of making these connections.  The modules cannot be removed from the cable and so all DAC cables are a fixed length. This is one of the drawbacks of using DAC cables compared to using a combination of fiber cables and optical transceivers. Mainly there are two types of DAC cables and those are

 

·Direct Attached Copper Cables(DAC cables)

·Active Optical Cables(AOC cables)

 

Direct Attached Copper Cables (DAC cables)

 

DAC cables are made from Twinax copper cables and are factory terminated with modules that provide an electrical connection directly into active equipment. Since high-speed cables are sensitive to electromagnetic fields, the shielding is an important quality factor for the copper cables. This is written on the cables in the form of AWG ratings (American Wire Gauge (AWG) system which defines wire size in diameters and it's showing the quality of shielding) like 28AWG and 30AWG. When AWG values increases it will increase the protection against electromagnetic waves. The longer the distance, the higher the AWG rating should be.

 

There are different types of high-speed DAC cables; direct and breakout, passive and active. A direct connect DAC cable will connect one port/line card to another (overall single cable). In fact, direct connect DAC cables are the most commonly seen in data centers. A breakout DAC cable will allow one port to be connected up to 4 other ports (DAC cable where there is a QSFP+ transceiver with 40Gbps transfer speed can be terminate into 4 x SFP+ cables where each terminal will provide 10Gbps transfer speed).

 

The DAC cable's termination can be either SFP transceiver or QSFP transceivers. So depending upon the characteristics of these transceivers the DAC cables properties will also change.

 

Even though we have classification direct and breakout cables, the main differentiation is based on the classification Passive and Active cable structure which is a vital part in defining the cables to be used.

 

Passive DAC cables

 

The most basic version of this cable is the ‘Passive Assembly’ where the data cables are directly connected to the Transmitting and Receiving signal. Hence, it has a minimal power consumption of no more than 0.15w and generally for short reach up to 7meters. This is the most commonly used ones also due to the reason that DAC cables are used mainly for the interconnection between devices in the same rack or adjacent racks.

 

 

Active DAC cables

 

The active cable version contains more sophisticated electronics where the transmitting power is amplified to give a better data-pulse. You can see this in the product naming like ACU and not CU (e.g. SFP-H10GB-ACU5M vs SFP-H10GB-CU5M). An active DAC cable will offer slightly longer transmission distance than a passive DAC cable as it uses electronics within the modules at each end to boost the signals. It allows a little longer transmission distance up to 15m and ensures better transmission quality. whereas it has a higher price and consumes more power around 0.5-1w.

 

As a summary of DAC cables, we can say that it's used to establish the connection between devices when the speed is at 10G we will choose SFP+ to direct DAC cables (passive or active depends on distance). When the speed rate is up to 40G we will choose QSFP+ DAC cables (passive or active depends on distance).

评论

发表评论

此博客中的热门博文

Common Armored Fiber Optic Cables

  Armored fiber optic cables are often installed in a network for added mechanical protection, as they have extra reinforcing in the cable housing to prevent damage. Two types of armored fiber optic cables exist: interlocking and corrugated. Interlocking armor is an aluminum armor that is helically wrapped around the cable and found in indoor and indoor/outdoor cables. It offers ruggedness and superior crush resistance. Corrugated armor is a coated steel tape folded around the cable longitudinally. It is found in outdoor cables and offers extra mechanical and rodent protection.   The Structure of an Armored Fiber Optic Cable In basic armored fiber cable designs, the outer sleeve provides protection against wind, solvents, and abrasion. This outer sleeve is usually made of plastic such as polyethylene. The next layer between the sleeve and the inner jacket is an armoring layer of materials that are difficult to cut, chew, or bu
阅读全文

what the Differences Between FBT Splitter and PLC Splitter

  In FTTx and PON architectures, optical splitter plays an increasingly significant role to create a variety of point-to-multipoint fiber optic networks. But do you know what is a fiber optic splitter? In fact, a fiber optic splitter is a passive optical device that can split or separate an incident light beam into two or more light beams. Basically, there are two types of fiber splitter classified by their working principle: fused biconical taper splitter (FBT splitter) and planar lightwave circuit splitter (PLC splitter). You may have one question: what’s the difference between them and shall we use FBT or PLC splitter?   What Is FBT Splitter? FBT splitter is based on a traditional technology to weld several fiber together from side of the fiber. Fibers are aligned by heating for a specific location and length. Because the fused fibers are very fragile, they are protected by a glass tube made of epoxy and silica powder. And then a stainless steel tube covers the inner glass tu
阅读全文

Introduction of Optical Fiber Couplers and How Do They Work?

 What are optical fiber couplers? A fiber optic coupler can be defined as an optical component used with one or more input fibers and several output fibers in fiber optic systems. A coupler essentially puts two or more cores of fibers together to connect. The simple coupler is the fused fiber 2x2 coupler. Couplers are used as multiplexers that are resistant to certain wavelengths. A fiber output depends on the wavelength of light and the frequency of polarization. The fiber refractive index also plays a significant role in the performance. Let’s checkout how do optic couplers work to understand this better. How do fiber optic couplers work? Either fiber optic couplers separate optical signals into multiple paths or combine multiple signals in one direction. Optical signals are more complicated than electrical signals, making it more difficult to design optical couplers than their electrical copy. Unlike electrical currents, the optical signal consists of a stream of signal carriers, in
阅读全文