Understanding the FTTx Network

by www.fiber-mart.com
FTTx technology plays an important role in providing higher bandwidth for a global network. And FTTx (fiber to the x) architecture is a typical example of substituting copper by fiber in high data rate traffic. According to the different termination places, the common FTTx architectures include FTTH, FTTB, FTTP, FTTC, and FTTN. This article will introduce these architectures respectively.
 
What is FTTx Network?
FTTx also called as fiber to the x, is a collective term for any broadband network architecture using optical fiber to provide all or part of the local loop used for last mile telecommunications.
 
Different FTTx Architectures
FTTP: fiber-to-the-premises, is a loosely used term, which can encompass both FTTH and FTTB or sometimes is used a particular fiber network that includes both homes and businesses. It depends on how the context is used and a specific location of where the fiber terminates. FTTP can offer higher bandwidth than any other broadband services, so operators usually use this technology to provide triple-play services.
 
FTTH: as indicated by the name fiber-to-the-home, fiber from the central office reaches the boundary of the living space, such as a box on the outside wall of a home. Once at the subscriber’s living or working space, the signal may be conveyed throughout the space using any means, such as twisted pair, coaxial pair, wireless, power line communication, or optical fiber. Passive optical networks (PONs) and point-to-point Ethernet are architectures that deliver triple-play services over FTTH networks directly from an operator’s central office.
 
FTTB (fiber to the building) — Fiber terminates at the boundary of the building. A fiber cable in FTTB installation goes to a point on shared property and the other cabling provides the connection to single homes, offices or other spaces. FTTB applications often use active or passive optical networks to distribute signals over a shared fiber optic cable to individual households of offices.
 
FTTC( fiber-to-the-curb or -cabinet), is a telecommunication system where fiber optic cables run directly to a platform near homes or any business environment and serve several customers. Each of these customers has a connection to this platform via coaxial cable or twisted pair. The term “curb” is an abstraction and just as easily means a pole-mounted device or communications closet or shed. Typically any system terminating fiber within 1000 ft (300 m) of the customer premises equipment would be described as FTTC. A perfect deployment example of FTTC is a DLC/NGDLC (digital loop carrier) which provides phone service.
 
FTTN (fiber to the node) — Fiber terminates in a street cabinet, which may be miles away from the customer premises, with the final connections being copper. One of the main benefits of FTTN is the ability to deliver data over more efficient fiber optic lines, rather than other fiber optic lines with the greater speed restriction
 
Conclusion
The advent of the FTTx network is of great significance for people around the world. As it has a higher speed, costs less, and carries more capacity than twisted pair conductor or coaxial cables. 

评论

发表评论

此博客中的热门博文

Common Armored Fiber Optic Cables

  Armored fiber optic cables are often installed in a network for added mechanical protection, as they have extra reinforcing in the cable housing to prevent damage. Two types of armored fiber optic cables exist: interlocking and corrugated. Interlocking armor is an aluminum armor that is helically wrapped around the cable and found in indoor and indoor/outdoor cables. It offers ruggedness and superior crush resistance. Corrugated armor is a coated steel tape folded around the cable longitudinally. It is found in outdoor cables and offers extra mechanical and rodent protection.   The Structure of an Armored Fiber Optic Cable In basic armored fiber cable designs, the outer sleeve provides protection against wind, solvents, and abrasion. This outer sleeve is usually made of plastic such as polyethylene. The next layer between the sleeve and the inner jacket is an armoring layer of materials that are difficult to cut, chew, or bu
阅读全文

what the Differences Between FBT Splitter and PLC Splitter

  In FTTx and PON architectures, optical splitter plays an increasingly significant role to create a variety of point-to-multipoint fiber optic networks. But do you know what is a fiber optic splitter? In fact, a fiber optic splitter is a passive optical device that can split or separate an incident light beam into two or more light beams. Basically, there are two types of fiber splitter classified by their working principle: fused biconical taper splitter (FBT splitter) and planar lightwave circuit splitter (PLC splitter). You may have one question: what’s the difference between them and shall we use FBT or PLC splitter?   What Is FBT Splitter? FBT splitter is based on a traditional technology to weld several fiber together from side of the fiber. Fibers are aligned by heating for a specific location and length. Because the fused fibers are very fragile, they are protected by a glass tube made of epoxy and silica powder. And then a stainless steel tube covers the inner glass tu
阅读全文

Introduction of Optical Fiber Couplers and How Do They Work?

 What are optical fiber couplers? A fiber optic coupler can be defined as an optical component used with one or more input fibers and several output fibers in fiber optic systems. A coupler essentially puts two or more cores of fibers together to connect. The simple coupler is the fused fiber 2x2 coupler. Couplers are used as multiplexers that are resistant to certain wavelengths. A fiber output depends on the wavelength of light and the frequency of polarization. The fiber refractive index also plays a significant role in the performance. Let’s checkout how do optic couplers work to understand this better. How do fiber optic couplers work? Either fiber optic couplers separate optical signals into multiple paths or combine multiple signals in one direction. Optical signals are more complicated than electrical signals, making it more difficult to design optical couplers than their electrical copy. Unlike electrical currents, the optical signal consists of a stream of signal carriers, in
阅读全文