WHICH MATERIALS ARE COMMONLY FOUND IN FIBER OPTIC CABLES?

by www.fiber-mart.com
There is a wide assortment of applications for fiber optic cables, which is why they’re popping up in more and more places today. You will find fiber optic cables in telecommunications networks, in hospitals, in cars, and even in certain types of outdoor lighting. But do you know what fiber optic cables are actually made from? Here are some of the materials commonly found in fiber optic cables.
 
POLYVINYL CHLORIDE, BETTER KNOWN AS PVC
PVC can be found in fiber optic cables that are used both inside and outside. It features flame retardant properties and is resistant to many different environmental factors. It’s not quite as flexible as polyethylene, or PE, but you will still find it in many fiber optic cables despite this.
 
POLYETHYLENE, BETTER KNOWN AS PE
PE is one of the most popular cable jacket materials used in those fiber optic cables found outdoors. It’s resistant to both moisture and weather and is also known to be a great insulator. It can become very stiff when it gets cold outside, but PE is more flexible than PVC in most instances. You can make PE flame retardant by treating it with special chemicals.
 
FLUOROPOLYMERS
Typically found in fiber optic cables that are used for indoor applications, fluoropolymers are flame resistant and include low smoke properties. They also make fiber optic cables very flexible.
 
STEEL ARMOR
When fiber optic cables are buried deep underground for outdoor applications, they need to be protected. Steel armor provides them with all the protection they need. It can offer them crush resistance and prevent rodents from doing damage to the cables. Cables that include steel armor do need to be grounded properly, but there are advantages that make it worth the effort on the part of a fiber optic cable installer.
 
ARAMID YARN
You will often find aramid yarn inside of the cable jacket of fiber optic cables. It surrounds the fibers inside of the cables and protects them. It’s one of the things that makes fiber optic cables so durable and long-lasting.

评论

发表评论

此博客中的热门博文

Common Armored Fiber Optic Cables

  Armored fiber optic cables are often installed in a network for added mechanical protection, as they have extra reinforcing in the cable housing to prevent damage. Two types of armored fiber optic cables exist: interlocking and corrugated. Interlocking armor is an aluminum armor that is helically wrapped around the cable and found in indoor and indoor/outdoor cables. It offers ruggedness and superior crush resistance. Corrugated armor is a coated steel tape folded around the cable longitudinally. It is found in outdoor cables and offers extra mechanical and rodent protection.   The Structure of an Armored Fiber Optic Cable In basic armored fiber cable designs, the outer sleeve provides protection against wind, solvents, and abrasion. This outer sleeve is usually made of plastic such as polyethylene. The next layer between the sleeve and the inner jacket is an armoring layer of materials that are difficult to cut, chew, or bu
阅读全文

what the Differences Between FBT Splitter and PLC Splitter

  In FTTx and PON architectures, optical splitter plays an increasingly significant role to create a variety of point-to-multipoint fiber optic networks. But do you know what is a fiber optic splitter? In fact, a fiber optic splitter is a passive optical device that can split or separate an incident light beam into two or more light beams. Basically, there are two types of fiber splitter classified by their working principle: fused biconical taper splitter (FBT splitter) and planar lightwave circuit splitter (PLC splitter). You may have one question: what’s the difference between them and shall we use FBT or PLC splitter?   What Is FBT Splitter? FBT splitter is based on a traditional technology to weld several fiber together from side of the fiber. Fibers are aligned by heating for a specific location and length. Because the fused fibers are very fragile, they are protected by a glass tube made of epoxy and silica powder. And then a stainless steel tube covers the inner glass tu
阅读全文

Introduction of Optical Fiber Couplers and How Do They Work?

 What are optical fiber couplers? A fiber optic coupler can be defined as an optical component used with one or more input fibers and several output fibers in fiber optic systems. A coupler essentially puts two or more cores of fibers together to connect. The simple coupler is the fused fiber 2x2 coupler. Couplers are used as multiplexers that are resistant to certain wavelengths. A fiber output depends on the wavelength of light and the frequency of polarization. The fiber refractive index also plays a significant role in the performance. Let’s checkout how do optic couplers work to understand this better. How do fiber optic couplers work? Either fiber optic couplers separate optical signals into multiple paths or combine multiple signals in one direction. Optical signals are more complicated than electrical signals, making it more difficult to design optical couplers than their electrical copy. Unlike electrical currents, the optical signal consists of a stream of signal carriers, in
阅读全文