WHAT CAUSES DAMAGE TO FIBER OPTIC CABLES?

by www.fiber-mart.com
As long as fiber optic cables are installed properly, they should stand up to just about anything and continue to do their jobs. Nevertheless, there are certain instances in which fiber optic cables stop working due to unpredictable damage. Here are a few common examples:
 
ANIMALS CHEW THROUGH THEM
There are all kinds of animals out there, including everything from rats and rabbits to squirrels and bears, that will do damage to fiber optic cables if they come across them. In some cases, squirrels have been known to gnaw through fiber optic cables and knock out internet service for millions of people. In others, bears have ripped fiber optic cables to shreds with their teeth. Although it’s relatively rare to see animals damaging fiber optic cables, it does happen every now and then.
 
VANDALS CUT THEM
Animals aren’t the only ones who seem to enjoy cutting off fiber optic connections. Over the years, there have also been thousands of vandals who have intentionally cut fiber optic cables for one reason or another. While some of them have done it in an effort to steal fiber optic cables, others have done it just to do it and have restricted internet access for others in the process.
 
WEATHER RESTRICTS THEM
Fiber optic cables are designed to stand up to most weather conditions. But there have been times when hurricanes, blizzards, and other bad storms have knocked out fiber optic cables and forced repairs to be made. Something as simple as the wind blowing over a telephone pole can restrict fiber optic networks greatly.

评论

发表评论

此博客中的热门博文

Common Armored Fiber Optic Cables

  Armored fiber optic cables are often installed in a network for added mechanical protection, as they have extra reinforcing in the cable housing to prevent damage. Two types of armored fiber optic cables exist: interlocking and corrugated. Interlocking armor is an aluminum armor that is helically wrapped around the cable and found in indoor and indoor/outdoor cables. It offers ruggedness and superior crush resistance. Corrugated armor is a coated steel tape folded around the cable longitudinally. It is found in outdoor cables and offers extra mechanical and rodent protection.   The Structure of an Armored Fiber Optic Cable In basic armored fiber cable designs, the outer sleeve provides protection against wind, solvents, and abrasion. This outer sleeve is usually made of plastic such as polyethylene. The next layer between the sleeve and the inner jacket is an armoring layer of materials that are difficult to cut, chew, or bu
阅读全文

what the Differences Between FBT Splitter and PLC Splitter

  In FTTx and PON architectures, optical splitter plays an increasingly significant role to create a variety of point-to-multipoint fiber optic networks. But do you know what is a fiber optic splitter? In fact, a fiber optic splitter is a passive optical device that can split or separate an incident light beam into two or more light beams. Basically, there are two types of fiber splitter classified by their working principle: fused biconical taper splitter (FBT splitter) and planar lightwave circuit splitter (PLC splitter). You may have one question: what’s the difference between them and shall we use FBT or PLC splitter?   What Is FBT Splitter? FBT splitter is based on a traditional technology to weld several fiber together from side of the fiber. Fibers are aligned by heating for a specific location and length. Because the fused fibers are very fragile, they are protected by a glass tube made of epoxy and silica powder. And then a stainless steel tube covers the inner glass tu
阅读全文

Introduction of Optical Fiber Couplers and How Do They Work?

 What are optical fiber couplers? A fiber optic coupler can be defined as an optical component used with one or more input fibers and several output fibers in fiber optic systems. A coupler essentially puts two or more cores of fibers together to connect. The simple coupler is the fused fiber 2x2 coupler. Couplers are used as multiplexers that are resistant to certain wavelengths. A fiber output depends on the wavelength of light and the frequency of polarization. The fiber refractive index also plays a significant role in the performance. Let’s checkout how do optic couplers work to understand this better. How do fiber optic couplers work? Either fiber optic couplers separate optical signals into multiple paths or combine multiple signals in one direction. Optical signals are more complicated than electrical signals, making it more difficult to design optical couplers than their electrical copy. Unlike electrical currents, the optical signal consists of a stream of signal carriers, in
阅读全文