48-Port Gigabit PoE+ Managed Switch with 4 SFP+, 600W

48-Port Gigabit PoE+ Managed Network Switch with 4 SFP+, 600W


S1600-48T4S managed PoE+ Ethernet switch comes with 48x10/100/1000Base-T RJ45 Ethernet ports, 1x console port, 4x 10G SFP+ slots. It offers enterprise-class features, High-performance of both hardware and software , stable and reliable rapid spanning Tree Protocol (RSTP), free configuration, Strong network security, Convenient management and maintenance. The switch can automatically identify the connected devices whether compatible with IEEE 802.3af or IEEE 802.3at standards, and then supply power for them. The PoE switch makes it easier to deploy wireless access point (AP) and IP-based terminal network equipment with PoE technology. Fiber-MART.COM PoE+ Gigabit Ethernet switch comes with a 4-years limited warranty, including any quality problems during the free maintenance.

Product Details
Switch Port48 RJ45 Ports & 4x 10G SFP+ PortsSwitching Capacity180 Gbps
Forwarding Rate130.94 MppsPacket Buffer Memory32M
Max. Power Consumption600WPower Consumption Per PoE PortMax. 30W
PoE StandardCompliant with IEEE 802.3af/atWeb Management InterfaceSupported
Jumbo framesUp to 9.6KVLANsUp to 4K
MAC Address Table32KPower Pin TypeEnd-span
Mounting MethodRack-MountablePower SupplyInput 100-240VAC, 50-60Hz,Output DC 52V
Operating Humidity5% to 95% Non-condensingWarranty4-year

Quality Certification
Quality and standards are the foundation of Fiber-MART.COM. We are dedicated to providing customers with the outstanding, standards-compliant products and services.Fiber-MART.COM has passed many quality system verification, like ISO9001, CE, RoHS, FCC, established an internationally standardized quality assurance system and strictly implemented standardized management and control in the course of design, development, production, installation and service.
  • This product is in conformity with ISO9001. This system is valid to a company engaging in development, production and supply service of fiber optical products. Please contact us to learn more.
  • This product is free of lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls and phthalates. Please contact us to learn more.
  • This product was produced under the requirements of CE to indicate conformity with the essential health and safety. Please contact us to learn more.
  • This product fully accords with the FCC, which aims to manage the radio wave and magnetic fields more reasonably. Please contact us to learn more.

 

Product Highlights

How to Connect PoE Switch

 

PoE Support Features

Power over Ethernet Plus (PoE+) support with up to 600W of PoE budget Dual-mode PoE standard, compliant with both IEEE802.3af and IEEE802.3at Support PoE intelligent management system, timing of PoE power supply, power online configuration, voltage and current online monitoring etc. 25% redundant power peak, can fully allocate IEEE802.3af PD devices, and half allocate the IEEE802.3at PD devices IEEE802.3az Energy Efficient Ethernet, can automatically adjust energy consumption according to the ports' actual flow, dynamically sense idle periods between traffic bursts and quickly switch the interfaces into a low power idle mode, save 30% power dissipation

 

Layer 2+ Switching Features

Support O-ring, the failover time <50ms Support stable and reliable rapid spanning Tree Protocol (RSTP), which achieved real ring loop redundancy protection Support Port-based VLAN, IEEE 802.1Q VLAN and GVRP, simplify the network planning Support QinQ, extends the vlan up to 4094*4094 Support Link Aggregation Control Protocol (LACP) IEEE 802.3ad IGMP v1/v2 snooping, IGMP limits bandwidth-intensive multicast traffic to only the requesters

 

Network Security

Support dynamic or static binding by users’ definition, such as IP , MAC, VLAN, PORT, etc. Support TACACS+, SNMP v3, HTTPS and SSH, ensures all users are authorized before being granted access to the network Support port isolation, to prevent communication between two neighbor network equipment within the same broadcast domain, for reducing network risk Support storm control, to prevent traffic on a LAN from being disrupted by a broadcast, multicast, or unicast storm on a port Threat Defense features including Port Security, Dynamic ARP Inspection, and IP Source Guard Access Control Lists (ACLs) restrict access to sensitive network resources by denying packets based on source and destination MAC addresses, IP addresses, and TCP/UDP ports Apply security communication technology design, the HD surveillance video has traffic priority Adapt to harsh outdoor environments, 5KV ethernet ports surge protection, 6KV power ports surge protection, overcurrent fusing protection

 

Enterprise Level Management Features

Support various advanced management, such as WEB, CLI, TELNET, SNMP Support SNMP v1/v2c/v3 which aims at diffrent levels of network management RMON enhances the network monitoring and forecasting ability to ensure the network stability. Support BWM, convenient for online debugging. Support port mirroring Support Fiber-MART.COM switch intelligent management platform-FS-NMS

 

Enhanced Quality of Service

Up to eight egress queues per port and strict priority queuing so that the highest priority packets are serviced ahead of all other traffic Strict priority and weighted round-robin (WRR) Flow-based rate limiting and up to 256 aggregate or individual policers per port 802.1p class of service (CoS) and Differentiated Services Code Point (DSCP) classification

 

Hardware Configuration Features

PoE uses top-rated imported Microsemi chip, intelligentized power supply management, constant voltage and current power supply, safe and reliable Communication uses high-end imported VITESSE chip, high reliability, high throughput, low latency, excellent traffic control strategy PCB applys immersion gold technique, lower the fraction defective, provides signal reliability and anti-oxidative capacity, extend the service life of circuit Most advanced lead-free SMT, welding and assembly procedure, safe and environmental, strong heat-resisting ability, improve the seismic capability of devices High quality tantalum capacitor features long service life, heat-resisting, high accuracy, non-flammable, excellent frequency etc. Effective fully loaded switching power supply, Input 100-240VAC, 50-60Hz, overcurrent protection (blown fuses), 6V surge protection, up to 25% power margin Galvanized steel metal housing, IP30 protection grade, stronger corrosion and rust prevention, anti-interference Ethernet ports use 3μm gold plating technique, abrasion resistant, anti-oxidant, easily conductive, reduce Internet lag, improve the user experiences

Build a Powerful, Easy-to-Use Basic Business Network
Small and medium-sized businesses can get cost-effective networking solutions without sacrificing enhanced usability and strong performance because of the integrated L2+ features such as 802.1Q VLAN, QoS, IGMP Snooping and Static Routing.
1G Switches Build a Powerful, Easy-to-Use Basic Business Network
Cost-effective & Efficient PoE+ Solution for SMB
S1600-48T4S has 48x 10/100/1000Base-T RJ45 Ethernet ports and 4x 10G SFP+ slots in a compact 1RU form factor, provide an affordable solution for businesses of all sizes that require simple network management
1G Switches Cost-effective & Efficient PoE+ Solution for SMB
Superior Hardware Design
S1600-48T4S Gigabit Ethernet PoE+ Switch with an enterprise-grade high-quality hardware design ensures stability and longevity for PoE+ Series on your networks.
1G Switches Superior Hardware Design
Easy-to-Use Web Management
Fiber-MART.COM software provides the common and easy-to-use web browser-based management GUI, available command set to manage our PoE+ Ethernet switches.
1G Switches Easy-to-Use Web Management
Accessories List
Before you start installing the switch, make sure you get all the contents of the package.
1G Switches Accessories List

评论

发表评论

此博客中的热门博文

Common Armored Fiber Optic Cables

  Armored fiber optic cables are often installed in a network for added mechanical protection, as they have extra reinforcing in the cable housing to prevent damage. Two types of armored fiber optic cables exist: interlocking and corrugated. Interlocking armor is an aluminum armor that is helically wrapped around the cable and found in indoor and indoor/outdoor cables. It offers ruggedness and superior crush resistance. Corrugated armor is a coated steel tape folded around the cable longitudinally. It is found in outdoor cables and offers extra mechanical and rodent protection.   The Structure of an Armored Fiber Optic Cable In basic armored fiber cable designs, the outer sleeve provides protection against wind, solvents, and abrasion. This outer sleeve is usually made of plastic such as polyethylene. The next layer between the sleeve and the inner jacket is an armoring layer of materials that are difficult to cut, chew, or bu
阅读全文

what the Differences Between FBT Splitter and PLC Splitter

  In FTTx and PON architectures, optical splitter plays an increasingly significant role to create a variety of point-to-multipoint fiber optic networks. But do you know what is a fiber optic splitter? In fact, a fiber optic splitter is a passive optical device that can split or separate an incident light beam into two or more light beams. Basically, there are two types of fiber splitter classified by their working principle: fused biconical taper splitter (FBT splitter) and planar lightwave circuit splitter (PLC splitter). You may have one question: what’s the difference between them and shall we use FBT or PLC splitter?   What Is FBT Splitter? FBT splitter is based on a traditional technology to weld several fiber together from side of the fiber. Fibers are aligned by heating for a specific location and length. Because the fused fibers are very fragile, they are protected by a glass tube made of epoxy and silica powder. And then a stainless steel tube covers the inner glass tu
阅读全文

Introduction of Optical Fiber Couplers and How Do They Work?

 What are optical fiber couplers? A fiber optic coupler can be defined as an optical component used with one or more input fibers and several output fibers in fiber optic systems. A coupler essentially puts two or more cores of fibers together to connect. The simple coupler is the fused fiber 2x2 coupler. Couplers are used as multiplexers that are resistant to certain wavelengths. A fiber output depends on the wavelength of light and the frequency of polarization. The fiber refractive index also plays a significant role in the performance. Let’s checkout how do optic couplers work to understand this better. How do fiber optic couplers work? Either fiber optic couplers separate optical signals into multiple paths or combine multiple signals in one direction. Optical signals are more complicated than electrical signals, making it more difficult to design optical couplers than their electrical copy. Unlike electrical currents, the optical signal consists of a stream of signal carriers, in
阅读全文