4 FE port（PSE） POE Switch with 1 100M fiber port

FM SKU#:SKU00022L1
Model#:FM-2004SPF
MFG PART#:

Fast Ethernet POE switch Series--unmanagement

The PoE Switch provides power and data from a single point, using Power over Ethernet (PoE) over a single Cat-5 cable. The one Fast Ethernet ports can be used for any 10/100 Mbps link and other ports can supply industry-standard IEEE 802.3af power. Advanced auto-sensing algorithm gives power only to IEEE802.3af end devices, so no need to worry about damaging proprietary PoE or non-PoE equipment. In addition, it discontinues the power when PoE devices are disconnected. Easy and reliable, the PoE Switch automatically determines PoE requirements, speed, duplex, and cable type using Auto Uplink .

The affordably priced PoE Switch delivers PoE to any small business network that wants to simplify the installation of wireless access points and IP-based surveillance cameras. These devices are optimally installed on a ceiling or high on a wall, away from most electrical outlets. PoE eliminates the requirement for a dedicated electrical outlet to power these devices. This allows for flexibility in situating devices where AC power is difficult to access and lowers installation costs. Compact and flexible, the PoE Switch is ideal for small business networks that need to inexpensively use PoE to deploy wireless access points and IP-based network surveillance cameras.

Key Features

  • IEEE 802.3af power on up to 4/8/16/24 ports
  • Supply power to wireless access points and surveillance cameras over Cat-5 cabling
  • 5 /8/16/24 10/100 Mbps Ports with AutoUplink
  • Supports PoE power up to 15.4W for each PoE port
  • Supports PoE IEEE 802.3af compliant PDs
  • Supports IEEE 802.3x flow control for Full-duplex Mode and backpressure for Half-duplex Mode
  • LED indicators for monitoring power, link, activity and speed

    • Specifications

    Type2004SP2008SP2016SP2024SP
    Hardware specifications
    standardIEEE802.3、IEEE802.3u、IEEE802.3X、IEEE802.3af、IEEE802.3at
    Backplane bandwidth1G1.6G7.2G8.8G
    MAC Address table1K1K8K8K
    Port type4 FE port（PSE）8 FE port（PSE）16 FE port（PSE）24 FE port（PSE）
    1 100M fiber port1 100M fiber port2 1000M Combo port2 1000M Combo port
    Power48VDC48VDC100-240VAC
    power consumption60W(802.3af)120W(802.3af)270W(802.3af)400W（802.3af）
    Physical size118*89*25mm189*102*28mm440*315*44mm440*315*44mm
    weight0.34kg0.65kg2.25kg2.25kg
    Suitable temperature0℃-50℃（Working environment），-20℃-70℃（Storage temperature）
    Suitable humidity5%-90% No condensation (work environment)



    Ordering Information

    TypeProduct description
    FM-2004SP4 FE port（PSE）+1 FE port
    FM-2004SPF4 FE port（PSE）+1 100M fiber port
    FM-2008SP8 FE port（PSE）+1 FE port
    FM-2008SPF8 FE port（PSE）+1 100M fiber port
    FM-2008SP-44 FE Port（PSE）+4 FE port
    FM-2008SPF-44 FE port（PSE）+4 FE port+1 100M fiber port
    FM-2016SP16 FE port（PSE）+1 1000M Combo port
    FM-2024SP24 FE port（PSE）+1 1000M Combo port

    Type2004SP2008SP2016SP2024SP
    Hardware specifications
    standardIEEE802.3、IEEE802.3u、IEEE802.3X、IEEE802.3af、IEEE802.3at
    Backplane bandwidth1G1.6G7.2G8.8G
    MAC Address table1K1K8K8K
    Port type4 FE port（PSE）8 FE port（PSE）16 FE port（PSE）24 FE port（PSE）
    1 100M fiber port1 100M fiber port2 1000M Combo port2 1000M Combo port
    Power48VDC48VDC100-240VAC
    power consumption60W(802.3af)120W(802.3af)270W(802.3af)400W（802.3af）
    Physical size118*89*25mm189*102*28mm440*315*44mm440*315*44mm
    weight0.34kg0.65kg2.25kg2.25kg
    Suitable temperature0℃-50℃（Working environment），-20℃-70℃（Storage temperature）
    Suitable humidity5%-90% No condensation (work environment)

    评论

    发表评论

    此博客中的热门博文

    Common Armored Fiber Optic Cables

      Armored fiber optic cables are often installed in a network for added mechanical protection, as they have extra reinforcing in the cable housing to prevent damage. Two types of armored fiber optic cables exist: interlocking and corrugated. Interlocking armor is an aluminum armor that is helically wrapped around the cable and found in indoor and indoor/outdoor cables. It offers ruggedness and superior crush resistance. Corrugated armor is a coated steel tape folded around the cable longitudinally. It is found in outdoor cables and offers extra mechanical and rodent protection.   The Structure of an Armored Fiber Optic Cable In basic armored fiber cable designs, the outer sleeve provides protection against wind, solvents, and abrasion. This outer sleeve is usually made of plastic such as polyethylene. The next layer between the sleeve and the inner jacket is an armoring layer of materials that are difficult to cut, chew, or bu
    阅读全文

    what the Differences Between FBT Splitter and PLC Splitter

      In FTTx and PON architectures, optical splitter plays an increasingly significant role to create a variety of point-to-multipoint fiber optic networks. But do you know what is a fiber optic splitter? In fact, a fiber optic splitter is a passive optical device that can split or separate an incident light beam into two or more light beams. Basically, there are two types of fiber splitter classified by their working principle: fused biconical taper splitter (FBT splitter) and planar lightwave circuit splitter (PLC splitter). You may have one question: what’s the difference between them and shall we use FBT or PLC splitter?   What Is FBT Splitter? FBT splitter is based on a traditional technology to weld several fiber together from side of the fiber. Fibers are aligned by heating for a specific location and length. Because the fused fibers are very fragile, they are protected by a glass tube made of epoxy and silica powder. And then a stainless steel tube covers the inner glass tu
    阅读全文

    Introduction of Optical Fiber Couplers and How Do They Work?

     What are optical fiber couplers? A fiber optic coupler can be defined as an optical component used with one or more input fibers and several output fibers in fiber optic systems. A coupler essentially puts two or more cores of fibers together to connect. The simple coupler is the fused fiber 2x2 coupler. Couplers are used as multiplexers that are resistant to certain wavelengths. A fiber output depends on the wavelength of light and the frequency of polarization. The fiber refractive index also plays a significant role in the performance. Let’s checkout how do optic couplers work to understand this better. How do fiber optic couplers work? Either fiber optic couplers separate optical signals into multiple paths or combine multiple signals in one direction. Optical signals are more complicated than electrical signals, making it more difficult to design optical couplers than their electrical copy. Unlike electrical currents, the optical signal consists of a stream of signal carriers, in
    阅读全文