FIBER OPTIC CONNECTORS: THEN VS. NOW

by www.fiber-mart.com
Finding the right fiber optic connector for an application used to be a straightforward choice based on what was available, but now the number of fiber connectors on the market can be paralyzing. Design and performance improvements have resulted in a proliferation of styles and types of fiber optic connectors. Many fiber connectors currently on the market provide a wide range of terminal-to-terminal solutions, many of which can be terminated in the field.
 
Old style fiber optic connectors like the Biconic are now obsolete, but they were cutting edge technology. AT&T derived the name Biconic from a conic-shaped ferrule centered around the fibers. Metal SMA connectors were the only choice for connecting multimode fibers until Japanese engineers developed ceramic ferrules.
 
Soon D4 and FC connectors used built-in keys as optical coupling repeaters with FC/PC and FC/UPC receptors. The ST bayonet-style connector followed quickly. SMA fiber connectors are declining in popularity, but ST fiber connectors are still industry standards. The Fiber Optic Association has a detailed history of connectors if you want a trip down memory lane.
 
CURRENT FIBER OPTIC CONNECTORS
Most optical fiber connectors on the market today have LC duplex ports or MPO multi-fiber ports. The twin advantages of small size and high-density patching make them indispensable in most data centers using 40 GBPS or 100 GBPS broadband. Now you can choose between MXCs and PRIZMs with laser lenses instead of physical connectors.
 
CHOOSING THE RIGHT FIBER CONNECTOR
STEP ONE: NARROW YOUR CHOICE BASED ON THE APPLICATION
One way of finding the right fiber connector is to eliminate the ones you that won’t work, giving you a smaller set of choices to compare.
 
What type of hardware are you connecting?
Do you need connections at each end?
What about data transmission speeds, distance, and total connections?
Your insertion loss (IL), return loss (RL), and standards requirements will guide your decision about both the equipment and fiber connectors needed for your application. Next, decide whether or not to use pre-terminated cables based on your optical transceiver modules and bulkhead receptacles.
 
STEP TWO: NARROW YOUR CHOICE BASED ON THE OPERATING ENVIRONMENT
Your application’s operating environment is an essential factor in choosing a fiber optic connector. The environmental conditions, type of fiber, cable construction will limit the choices available. For example, field terminations are more demanding in extreme environments so a pre-polished connector is a better choice. The cable diameter will limit your options of jackets. Mechanical connectors are far more convenient that polishing in the field, but they have a limited range of operating temperatures. Adhesive fiber connectors need to be polished in the field for optimal performance, so they are a good choice if you are operating in a data center or any other reasonably accessible environment. Or you can challenge your skills with a Fusion Splice Connector for precision fitting.
 
STEP THREE: FINALIZE YOUR LIST BASED ON LIFE EXPECTANCY
You probably considered the life expectancy of your application when you set up your fiber network. A system built to last 30 years will be very different from the one you only need for a few months. Most cable systems fail at the connections, not the fiber itself. Fiber connectors show a decrease in performance after cleaning, repetitive mating and demating, and scratching. Polished fiber connectors often have a lifetime warranty, so check manufacturer’s websites. Pre-polished connectors have a shorter lifespan. Whichever type you choose, training your technicians to clean fiber connectors properly, unplug using the pulling grip instead of the connector, and dusting during mating extend the life. 
 
CONCLUSION
There are many choices for fiber connectors on the market, but you can find the best match for your application by methodically narrowing down the options based on your application needs and operating environment. This will result in a limited list that you can reasonable research on manufacturer and review websites.

评论

发表评论

此博客中的热门博文

Common Armored Fiber Optic Cables

  Armored fiber optic cables are often installed in a network for added mechanical protection, as they have extra reinforcing in the cable housing to prevent damage. Two types of armored fiber optic cables exist: interlocking and corrugated. Interlocking armor is an aluminum armor that is helically wrapped around the cable and found in indoor and indoor/outdoor cables. It offers ruggedness and superior crush resistance. Corrugated armor is a coated steel tape folded around the cable longitudinally. It is found in outdoor cables and offers extra mechanical and rodent protection.   The Structure of an Armored Fiber Optic Cable In basic armored fiber cable designs, the outer sleeve provides protection against wind, solvents, and abrasion. This outer sleeve is usually made of plastic such as polyethylene. The next layer between the sleeve and the inner jacket is an armoring layer of materials that are difficult to cut, chew, or bu
阅读全文

what the Differences Between FBT Splitter and PLC Splitter

  In FTTx and PON architectures, optical splitter plays an increasingly significant role to create a variety of point-to-multipoint fiber optic networks. But do you know what is a fiber optic splitter? In fact, a fiber optic splitter is a passive optical device that can split or separate an incident light beam into two or more light beams. Basically, there are two types of fiber splitter classified by their working principle: fused biconical taper splitter (FBT splitter) and planar lightwave circuit splitter (PLC splitter). You may have one question: what’s the difference between them and shall we use FBT or PLC splitter?   What Is FBT Splitter? FBT splitter is based on a traditional technology to weld several fiber together from side of the fiber. Fibers are aligned by heating for a specific location and length. Because the fused fibers are very fragile, they are protected by a glass tube made of epoxy and silica powder. And then a stainless steel tube covers the inner glass tu
阅读全文

Introduction of Optical Fiber Couplers and How Do They Work?

 What are optical fiber couplers? A fiber optic coupler can be defined as an optical component used with one or more input fibers and several output fibers in fiber optic systems. A coupler essentially puts two or more cores of fibers together to connect. The simple coupler is the fused fiber 2x2 coupler. Couplers are used as multiplexers that are resistant to certain wavelengths. A fiber output depends on the wavelength of light and the frequency of polarization. The fiber refractive index also plays a significant role in the performance. Let’s checkout how do optic couplers work to understand this better. How do fiber optic couplers work? Either fiber optic couplers separate optical signals into multiple paths or combine multiple signals in one direction. Optical signals are more complicated than electrical signals, making it more difficult to design optical couplers than their electrical copy. Unlike electrical currents, the optical signal consists of a stream of signal carriers, in
阅读全文