A FASCINATING USE OF FIBER OPTICS

Fiber optics are used in a variety of ways to improve people’s lives. One such way is the recent development of a handheld fiber optic probe that’s used to diagnose cancer. Utilizing an ultrafast laser, this probe can perform multiple nonlinear imaging techniques without the need for tissue staining. In other words, it’s a cleaner, easier, more efficient way to check people’s tissues to reveal cancer and/or other diseases.
 
If this sounds like something from Star Trek, where a probe was used to scan a person for internal problems, that’s pretty much where technology is headed, with a big nod to those who work with fiber optics to “make it so.”
 
Instead of taking a bit of tissue from a person (with a biopsy) and then sending that tissue to a pathologist who stains it to look for cancer cells under a microscope, fiber optics makes it possible to literally diagnose cancer “on the spot.” This saves time, obviously. It also helps surgeons figure out cancerous versus healthy tissue during surgery.
 
The probe that checks for cancer is quite small– picture a ballpoint pen! Interestingly, the diameter of the handheld device, which is currently 8 millimeters in diameter, could probably be made even smaller in the future.
 
Essentially, the new probe functions like a mini microscope. It uses near-infrared lasers to allow doctors to get a true view of what’s going on inside people’s tissues. Because of fiber optics, the probe’s size is quite small compared to previous generations of devices meant to do similar things. Fiber allows for thousands of light guiding elements making an endoscopic approach easy.
 
Currently, this new probe is set to be tested on animals. Eventually it will be tested on patients in a clinical setting.
 
If you ever watched Star Trek and marveled at the idea of a doctor using some sort of handheld device to literally look underneath the skin and discover what’s going on, it looks like Star Trek was onto something decades before it actually came true in reality.

评论

发表评论

此博客中的热门博文

Common Armored Fiber Optic Cables

  Armored fiber optic cables are often installed in a network for added mechanical protection, as they have extra reinforcing in the cable housing to prevent damage. Two types of armored fiber optic cables exist: interlocking and corrugated. Interlocking armor is an aluminum armor that is helically wrapped around the cable and found in indoor and indoor/outdoor cables. It offers ruggedness and superior crush resistance. Corrugated armor is a coated steel tape folded around the cable longitudinally. It is found in outdoor cables and offers extra mechanical and rodent protection.   The Structure of an Armored Fiber Optic Cable In basic armored fiber cable designs, the outer sleeve provides protection against wind, solvents, and abrasion. This outer sleeve is usually made of plastic such as polyethylene. The next layer between the sleeve and the inner jacket is an armoring layer of materials that are difficult to cut, chew, or bu
阅读全文

what the Differences Between FBT Splitter and PLC Splitter

  In FTTx and PON architectures, optical splitter plays an increasingly significant role to create a variety of point-to-multipoint fiber optic networks. But do you know what is a fiber optic splitter? In fact, a fiber optic splitter is a passive optical device that can split or separate an incident light beam into two or more light beams. Basically, there are two types of fiber splitter classified by their working principle: fused biconical taper splitter (FBT splitter) and planar lightwave circuit splitter (PLC splitter). You may have one question: what’s the difference between them and shall we use FBT or PLC splitter?   What Is FBT Splitter? FBT splitter is based on a traditional technology to weld several fiber together from side of the fiber. Fibers are aligned by heating for a specific location and length. Because the fused fibers are very fragile, they are protected by a glass tube made of epoxy and silica powder. And then a stainless steel tube covers the inner glass tu
阅读全文

Introduction of Optical Fiber Couplers and How Do They Work?

 What are optical fiber couplers? A fiber optic coupler can be defined as an optical component used with one or more input fibers and several output fibers in fiber optic systems. A coupler essentially puts two or more cores of fibers together to connect. The simple coupler is the fused fiber 2x2 coupler. Couplers are used as multiplexers that are resistant to certain wavelengths. A fiber output depends on the wavelength of light and the frequency of polarization. The fiber refractive index also plays a significant role in the performance. Let’s checkout how do optic couplers work to understand this better. How do fiber optic couplers work? Either fiber optic couplers separate optical signals into multiple paths or combine multiple signals in one direction. Optical signals are more complicated than electrical signals, making it more difficult to design optical couplers than their electrical copy. Unlike electrical currents, the optical signal consists of a stream of signal carriers, in
阅读全文