Fiber-mart.com MTP Fiber Cable Solutions

Fiber-mart.com MTP Fiber Cable Solutions

by Fiber-MART.COM
Today, fiber-mart.com will give a brief introduction of MTP Fiber Cable Solutions.
High performance, high density MTP fiber cable solutions from fiber-mart.com replace up to 12 traditional fiber optic connectors with one single small form factor connector reducing installation time and labor costs. They are suitable for a variety of application, and industrial control applications. These multi-fiber solutions provide advantages in size, offering 12 times the density when compared to a similarily sized SC connector. Factory terminated and tested, MTP solutions provide significant installation time savings during installation or reconfiguration. A push-pull design is utilized for easy mating and removal. Break-out solutions are ideal for making connections within rack mounted or wall mounted fiber enclosures that utilize single fiber connectors.
Features of fiber-mart.com’s MTP Fiber Cable Solutions:
1.MTP breakout cable
2.Available in fiber counts from 8 to 144
3.Factory tested for insertion loss
4.Compact push-pull locking mechanism
Reduces installation time and costs
5.PC polish for multimode fiber; APC polish for single-mode fiber
Ribbon cables are 1/3 the size of tight buffered fiber optic cables, which enables them to fit into tight spaces and have a smaller minimum bend radius that meets TIA/EIA 604-5 (FOCIS-5) standard for MPO/MTP connectors.
Designed and tested to Telcordia-GR-1435
Lifetime warranty
NOTE: Custom configurations and test results are available by request. Contact your sales representative for details.
fiber-mart.com’s MTP Fiber Cable Styles
MTP Patch Cable:
1.12 or 24 fiber strands with MTP connector on each end
2.Used for point to point application or for connections to standard fiber patch panels
3.Available in both single-mode and multimode fiber
4.Available in both PVC (OFNR) and plenum (OFNP) jackets
MTP Harness/Breakout Cable:
Cable has a single MTP connector on one end that breaks out into 6 or 12 connectors (LC, SC, ST, etc., MTP to LC breakout cables are generally the most popular.)
1.Typically 12 strands, also available in 24 strands
2.Designed to save front panel space and streamline fiber management
3.Available in both single-mode and multimode fiber
4.Available in both PVC (OFNR) and plenum (OFNP) jackets
MTP Trunk Cable:
1Wide variety of strand counts and configurations – most common is the 12-strand plenum ribbon
2.Available in both single-mode and multimode fiber
3.Available in both PVC (OFNR) and plenum (OFNP) jackets
4.Manufactured with a pulling eye, enables cable to go around bends without getting tangled and protects the connector during installation
Key Applications of of MTP Fiber Cable Solutions:
1.Data Centers
2.Fiber Channel Storage
3.Parallel Processing Applications
4.Telecommunications
5.Optical Backplanes
6.Industrial Control Applications
7.Backbone Installations
8.Disaster Recovery
More details, pls visit our website:www.fiber-mart.com

评论

发表评论

此博客中的热门博文

Common Armored Fiber Optic Cables

  Armored fiber optic cables are often installed in a network for added mechanical protection, as they have extra reinforcing in the cable housing to prevent damage. Two types of armored fiber optic cables exist: interlocking and corrugated. Interlocking armor is an aluminum armor that is helically wrapped around the cable and found in indoor and indoor/outdoor cables. It offers ruggedness and superior crush resistance. Corrugated armor is a coated steel tape folded around the cable longitudinally. It is found in outdoor cables and offers extra mechanical and rodent protection.   The Structure of an Armored Fiber Optic Cable In basic armored fiber cable designs, the outer sleeve provides protection against wind, solvents, and abrasion. This outer sleeve is usually made of plastic such as polyethylene. The next layer between the sleeve and the inner jacket is an armoring layer of materials that are difficult to cut, chew, or bu
阅读全文

what the Differences Between FBT Splitter and PLC Splitter

  In FTTx and PON architectures, optical splitter plays an increasingly significant role to create a variety of point-to-multipoint fiber optic networks. But do you know what is a fiber optic splitter? In fact, a fiber optic splitter is a passive optical device that can split or separate an incident light beam into two or more light beams. Basically, there are two types of fiber splitter classified by their working principle: fused biconical taper splitter (FBT splitter) and planar lightwave circuit splitter (PLC splitter). You may have one question: what’s the difference between them and shall we use FBT or PLC splitter?   What Is FBT Splitter? FBT splitter is based on a traditional technology to weld several fiber together from side of the fiber. Fibers are aligned by heating for a specific location and length. Because the fused fibers are very fragile, they are protected by a glass tube made of epoxy and silica powder. And then a stainless steel tube covers the inner glass tu
阅读全文

Introduction of Optical Fiber Couplers and How Do They Work?

 What are optical fiber couplers? A fiber optic coupler can be defined as an optical component used with one or more input fibers and several output fibers in fiber optic systems. A coupler essentially puts two or more cores of fibers together to connect. The simple coupler is the fused fiber 2x2 coupler. Couplers are used as multiplexers that are resistant to certain wavelengths. A fiber output depends on the wavelength of light and the frequency of polarization. The fiber refractive index also plays a significant role in the performance. Let’s checkout how do optic couplers work to understand this better. How do fiber optic couplers work? Either fiber optic couplers separate optical signals into multiple paths or combine multiple signals in one direction. Optical signals are more complicated than electrical signals, making it more difficult to design optical couplers than their electrical copy. Unlike electrical currents, the optical signal consists of a stream of signal carriers, in
阅读全文