How Much Temperature Can the Optical Fiber Withstand?

 by www.fiber-mart.com

Is the fiber optical cable afraid of excessive temperature? Different kinds of optical fiber cables have an top limit. The working temperature of general optical fiber community cable is -40ºC ~ +75ºC.

If it is an optical fiber cable used in industry, every fiber cable has a one-of-a-kind composition, the excessive temperature and low temperature it can stand up to are different, so you want to seek advice from the producer for details.

The Optical fiber temperature regulation
The higher and decrease limits of the working surroundings temperature of the optical fiber cable temperature dimension device are typically -20℃~+55℃.

Generally, the traditional excessive temperature resistant optical fiber is -20°~+300° for long-term, and for momentary can attain 350°

The working surroundings temperature of the allotted optical fiber temperature size machine is -10℃~50℃, and the temperature size vary is traditional temperature: -40—120℃; excessive temperature optical cable: -40—400℃

The measuring temperature vary of optical fiber grating temperature sensor is -40℃~300℃

How Optical fiber cable is affected by using temperature?
1. The temperature attribute of optical fiber refers to the have an effect on on optical fiber loss beneath excessive and low temperature conditions. The loss of optical fiber will increase underneath low temperature conditions. This is due to the extraordinary growth coefficients of optical fiber coating layer, overmolding layer and quartz. The thermal growth coefficient of natural resin and plastic is tons large than that of quartz. It shrinks at low temperature and elongates at excessive temperature. Under the motion of this type of axial compressive force, microbending will amplify the loss. If working at low temperature, as the temperature continues to decrease, the fiber loss will proceed to increase. When the temperature drops to about -55°C, the loss will increase sharply, making the device unable to function normally.

2. The microbending loss of the optical fiber due to temperature modifications is brought about through thermal growth and contraction. It is regarded in physics that the thermal growth coefficient of the silicon dioxide (SiO2) that constitutes the optical fiber is very small, and it infrequently shrinks when the temperature drops. The optical fiber should be lined and introduced with some different elements all through the technique of forming a cable. The growth coefficient of the coating cloth and different factors is rather large. When the temperature decreases, the shrinkage is extra serious, so when the temperature changes, the enlargement coefficient of the cloth is different. , Will make the optical fiber bend slightly, specially in the low temperature area.

评论

发表评论

此博客中的热门博文

Common Armored Fiber Optic Cables

  Armored fiber optic cables are often installed in a network for added mechanical protection, as they have extra reinforcing in the cable housing to prevent damage. Two types of armored fiber optic cables exist: interlocking and corrugated. Interlocking armor is an aluminum armor that is helically wrapped around the cable and found in indoor and indoor/outdoor cables. It offers ruggedness and superior crush resistance. Corrugated armor is a coated steel tape folded around the cable longitudinally. It is found in outdoor cables and offers extra mechanical and rodent protection.   The Structure of an Armored Fiber Optic Cable In basic armored fiber cable designs, the outer sleeve provides protection against wind, solvents, and abrasion. This outer sleeve is usually made of plastic such as polyethylene. The next layer between the sleeve and the inner jacket is an armoring layer of materials that are difficult to cut, chew, or bu
阅读全文

what the Differences Between FBT Splitter and PLC Splitter

  In FTTx and PON architectures, optical splitter plays an increasingly significant role to create a variety of point-to-multipoint fiber optic networks. But do you know what is a fiber optic splitter? In fact, a fiber optic splitter is a passive optical device that can split or separate an incident light beam into two or more light beams. Basically, there are two types of fiber splitter classified by their working principle: fused biconical taper splitter (FBT splitter) and planar lightwave circuit splitter (PLC splitter). You may have one question: what’s the difference between them and shall we use FBT or PLC splitter?   What Is FBT Splitter? FBT splitter is based on a traditional technology to weld several fiber together from side of the fiber. Fibers are aligned by heating for a specific location and length. Because the fused fibers are very fragile, they are protected by a glass tube made of epoxy and silica powder. And then a stainless steel tube covers the inner glass tu
阅读全文

Introduction of Optical Fiber Couplers and How Do They Work?

 What are optical fiber couplers? A fiber optic coupler can be defined as an optical component used with one or more input fibers and several output fibers in fiber optic systems. A coupler essentially puts two or more cores of fibers together to connect. The simple coupler is the fused fiber 2x2 coupler. Couplers are used as multiplexers that are resistant to certain wavelengths. A fiber output depends on the wavelength of light and the frequency of polarization. The fiber refractive index also plays a significant role in the performance. Let’s checkout how do optic couplers work to understand this better. How do fiber optic couplers work? Either fiber optic couplers separate optical signals into multiple paths or combine multiple signals in one direction. Optical signals are more complicated than electrical signals, making it more difficult to design optical couplers than their electrical copy. Unlike electrical currents, the optical signal consists of a stream of signal carriers, in
阅读全文