What are Features and Applications of Multimode Fiber Cables?

 by www.fiber-mart.com

The data center has become the engine of modern life, and the growing network information is transmitted and stored at high speed through the data center. Most of the connection distances inside the data center are short, ranging from a few meters to a few hundred meters. In these short-distance high-speed data communications, multimode optical fibers and optical modules with vertical cavity surface emitting lasers (VCSEL) as the core components have been widely used. Compared with the single-mode transmission scheme, the multi-mode scheme uses a low-cost, low-power laser to achieve fast and efficient coupling between the fiber and the laser. Multi-mode fiber can achieve higher transmission rate or longer transmission distance than copper cable, and lower cost than single-mode fiber system.At present, the internal connection rate of the data center has reached 100 Gbit/s, and 400 Gbit/s is just around the corner. The industry has been developing new types of multimode optical fibers to improve its performance, including broadband multimode optical fiber technology that realizes wavelength division multiplexing in a single optical fiber; and long-wave multimode optical fiber that supports longer transmission distances. In addition, in order to support high-density, miniaturized connections, and improve data center space utilization, heat dissipation efficiency, and cable management efficiency, multimode optical fibers with bending resistance have also been rapidly developed and deployed. This article will combine the technical principles of multimode fiber and the evolution of optical module technology to discuss the development trend of multimode fiber supporting high-speed optical transceivers.
 
1. The Features and Applications of Multimode Fiber Cables
 
The development of cloud computing has promoted the development of ultra-large-scale data centers, resulting in a development trend different from traditional enterprise data centers. Whether it is domestic or international, the evolution of server port rates for ultra-large-scale data center users based on cloud computing services is significantly faster than that of traditional enterprise data centers. Traditional enterprises will stably use OM4 Multimode Fiber Cables, and more than 90% of the system link length is less than 100m.
 
However, ultra-large-scale data center users choose more singlemode fiber cables, and 70% of the system link length exceeds 100m.
 
The development of ultra-large-scale data centers has increased the utilization rate of single mode fiber cable, but multimode fiber cable still has its unique advantages. These advantages are that the use of lower-cost optical transceiver modules, lower power consumption, and the transmission distance can cover most of the links in the data center, so solutions based on Multimode Fiber Cables and multimode optical modules are still very attractive to customers.
 
2. The Bandwidth of 850nm Multimode Fiber Cable
 
Unlike the single mode fiber optic system, the transmission distance and speed of the multimode fiber optic system are limited by the bandwidth of the multimode fiber cables. In order to support the higher transmission distance of the high-speed system, the mode bandwidth of the multimode fiber cable needs to be increased. The design of multimode fiber cable usually adopts a-profile of graded index to reduce the mode group delay and achieve high bandwidth.
 
Among them, rO is the core radius, ∆0 is the maximum value of the relative refractive index change of the core, which can be expressed as follows.
 
Among them, nO is the central refractive index of the core and n1 is the refractive index of the cladding.
 
Choosing an appropriate value of a, the mode bandwidth of the multimode fiber optic cables can be optimized within a certain wavelength range. Figure 3 shows the bandwidth distribution of a 50 µm multimode fiber cable when there's 1% change in the a value of the 850 nm wavelength.  When the a value of the fiber is at the optimal position, the bandwidth exceeds 13 GHz. km. The figure also reflects that the bandwidth of a multimode fiber cable is very sensitive to the A value. To achieve the maximum bandwidth, A value (core refractive index) needs to be very finely controlled, otherwise various defects in the core profile during the manufacturing process will affect the actual bandwidth of the multimode fiber optic cable.
 
With the advancement of optical fiber cable design and manufacturing technology, the bandwidth of multimode optical fiber cable has been greatly improved. Table 1 shows different types of standard multi-mode fiber cables. The 62.5 µm multimode fiber optic cable has a higher numerical aperture and a larger core, which can couple the light-emitting diode light source (LED) into the fiber, and supports 2 km at a rate of 10 Mbit/s or even 100 Mbit/s. data transmission. With the development of Ethernet standards and low-cost 850 nm VCSELs, multimode fiber cables with a core diameter of 50µm are more popular in the market. The fiber has lower modal dispersion and higher bandwidth, and the spot size and numerical aperture of the VCSEL is smaller than that of the LED, and the laser can be easily coupled into the 50 µm fiber. By optimizing the fiber manufacturing process and adopting advanced refractive index control technology, the 50 µm multimode fiber cable has developed from OM2 (500 MHz. km) to OM3 (2 000 MHz. km), and now it has developed to OM4 (4 700 MHz. km). ).
 
For the multimode fiber system using 850 nm VCSEL, further increasing the bandwidth of the OM4 multimode fiber optic cable will not enable the optical module to transmit longer distances, because the system bandwidth depends on the effective mode bandwidth and dispersion of the fiber optic cables (related to the line width of the VCSEL laser and the fiber wavelength). If the system bandwidth needs to be increased, in addition to the effective mode bandwidth of the optical fiber cable, the dispersion value needs to be optimized. Partial dispersion can be compensated by differential mode delay (DMD) multimode fiber optic cable, or 850 nm VCSEL with a narrower line width or working in the long-wave region with lower dispersion

评论

发表评论

此博客中的热门博文

Common Armored Fiber Optic Cables

  Armored fiber optic cables are often installed in a network for added mechanical protection, as they have extra reinforcing in the cable housing to prevent damage. Two types of armored fiber optic cables exist: interlocking and corrugated. Interlocking armor is an aluminum armor that is helically wrapped around the cable and found in indoor and indoor/outdoor cables. It offers ruggedness and superior crush resistance. Corrugated armor is a coated steel tape folded around the cable longitudinally. It is found in outdoor cables and offers extra mechanical and rodent protection.   The Structure of an Armored Fiber Optic Cable In basic armored fiber cable designs, the outer sleeve provides protection against wind, solvents, and abrasion. This outer sleeve is usually made of plastic such as polyethylene. The next layer between the sleeve and the inner jacket is an armoring layer of materials that are difficult to cut, chew, or bu
阅读全文

what the Differences Between FBT Splitter and PLC Splitter

  In FTTx and PON architectures, optical splitter plays an increasingly significant role to create a variety of point-to-multipoint fiber optic networks. But do you know what is a fiber optic splitter? In fact, a fiber optic splitter is a passive optical device that can split or separate an incident light beam into two or more light beams. Basically, there are two types of fiber splitter classified by their working principle: fused biconical taper splitter (FBT splitter) and planar lightwave circuit splitter (PLC splitter). You may have one question: what’s the difference between them and shall we use FBT or PLC splitter?   What Is FBT Splitter? FBT splitter is based on a traditional technology to weld several fiber together from side of the fiber. Fibers are aligned by heating for a specific location and length. Because the fused fibers are very fragile, they are protected by a glass tube made of epoxy and silica powder. And then a stainless steel tube covers the inner glass tu
阅读全文

Introduction of Optical Fiber Couplers and How Do They Work?

 What are optical fiber couplers? A fiber optic coupler can be defined as an optical component used with one or more input fibers and several output fibers in fiber optic systems. A coupler essentially puts two or more cores of fibers together to connect. The simple coupler is the fused fiber 2x2 coupler. Couplers are used as multiplexers that are resistant to certain wavelengths. A fiber output depends on the wavelength of light and the frequency of polarization. The fiber refractive index also plays a significant role in the performance. Let’s checkout how do optic couplers work to understand this better. How do fiber optic couplers work? Either fiber optic couplers separate optical signals into multiple paths or combine multiple signals in one direction. Optical signals are more complicated than electrical signals, making it more difficult to design optical couplers than their electrical copy. Unlike electrical currents, the optical signal consists of a stream of signal carriers, in
阅读全文