The choice for big data era——40G QSFP+ AOC

 by www.fiber-mart.com

AOC stands for Active Optical Cable, realize photoelectric conversion and transmission by the optical transceiver at both ends. 40G QSFP+ AOC is one of the most popular Active Optical Cables on the market. Why is it develop so fast? What advantages does it have? Today, fiber-mart.com will introduce 40G QSFP+ AOC to everyone.
 
What is 40G QSFP+ AOC?
40G QSFP+ AOC is the core component for realizing parallel optical interconnection, made of ribbon optical patch cord connect two high-speed 40G parallel connectors(As below picture). There are 4 data channels in each signal direction, each channel can work at 10Gbps speed, transmission distance is generally 1 to 100m.
 
What advantages does 40G QSFP+ AOC have?
Compared with the traditional 40G copper cable, 40G AOC has incomparable advantages:
※High transmission efficiency, small size, light weight, low energy consumption.
※ AOC compared with optical transceiver, there is no cleanliness problem in the case of failure. No need to test the terminal plug, can help users save more time.
※ AOC wiring consistency and repeatability is better, the closed ends are more easily to avoid the effects of environment and vibration swing. If there is a fault, can be directly replaced, savings costs.
 
※Compared with optical transceiver, AOC is cheaper, can save the deployment cost, and the transmission distance can also meet the needs of a variety of short distance transmission applications.
 
fiber-mart.com provides two kinds of 40G QSFP+ AOC
1.40G QSFP+ to QSFP+ AOC
2.40G QSFP+ to 4*10G SFP+ AOC
Can compatible with different brands of switches, such as Cisco, HUAWEI, H3C, Intel etc,. Following will list a product base on thses two typs.
 
The 40G QSFP+ AOC provided by fiber-mart.com use imported laser accessories, low power consumption, high performance; High-quality environmental protection optical cable outer cover material, fully protect fiber core, with better signal transmission characteristics and greater flexibility; The connection port use reinforcement design, so as to better control the bending angle. Protective thread, to provide more reliable high-speed data transmission effect, longer service life.

    评论

    发表评论

    此博客中的热门博文

    Common Armored Fiber Optic Cables

      Armored fiber optic cables are often installed in a network for added mechanical protection, as they have extra reinforcing in the cable housing to prevent damage. Two types of armored fiber optic cables exist: interlocking and corrugated. Interlocking armor is an aluminum armor that is helically wrapped around the cable and found in indoor and indoor/outdoor cables. It offers ruggedness and superior crush resistance. Corrugated armor is a coated steel tape folded around the cable longitudinally. It is found in outdoor cables and offers extra mechanical and rodent protection.   The Structure of an Armored Fiber Optic Cable In basic armored fiber cable designs, the outer sleeve provides protection against wind, solvents, and abrasion. This outer sleeve is usually made of plastic such as polyethylene. The next layer between the sleeve and the inner jacket is an armoring layer of materials that are difficult to cut, chew, or bu
    阅读全文

    what the Differences Between FBT Splitter and PLC Splitter

      In FTTx and PON architectures, optical splitter plays an increasingly significant role to create a variety of point-to-multipoint fiber optic networks. But do you know what is a fiber optic splitter? In fact, a fiber optic splitter is a passive optical device that can split or separate an incident light beam into two or more light beams. Basically, there are two types of fiber splitter classified by their working principle: fused biconical taper splitter (FBT splitter) and planar lightwave circuit splitter (PLC splitter). You may have one question: what’s the difference between them and shall we use FBT or PLC splitter?   What Is FBT Splitter? FBT splitter is based on a traditional technology to weld several fiber together from side of the fiber. Fibers are aligned by heating for a specific location and length. Because the fused fibers are very fragile, they are protected by a glass tube made of epoxy and silica powder. And then a stainless steel tube covers the inner glass tu
    阅读全文

    Introduction of Optical Fiber Couplers and How Do They Work?

     What are optical fiber couplers? A fiber optic coupler can be defined as an optical component used with one or more input fibers and several output fibers in fiber optic systems. A coupler essentially puts two or more cores of fibers together to connect. The simple coupler is the fused fiber 2x2 coupler. Couplers are used as multiplexers that are resistant to certain wavelengths. A fiber output depends on the wavelength of light and the frequency of polarization. The fiber refractive index also plays a significant role in the performance. Let’s checkout how do optic couplers work to understand this better. How do fiber optic couplers work? Either fiber optic couplers separate optical signals into multiple paths or combine multiple signals in one direction. Optical signals are more complicated than electrical signals, making it more difficult to design optical couplers than their electrical copy. Unlike electrical currents, the optical signal consists of a stream of signal carriers, in
    阅读全文