Difference Between GBIC and SFP & Application

 


GBIC (Gigabit Interface Converter) is a hot-swappable Gigabit Interface optical module with SC connector. A gigabit interface converter (GBIC) is a standard for transceivers, commonly used with Gigabit Ethernet and fiber channel. A variation of the GBIC called the small form-factor pluggable transceiver (SFP),also known as mini-GBIC, has the same functionality but in a smaller form factor. When it’s best to use GBIC and When to use SFP? What’s the specific difference between GBIC and SFP? This article will talk about it.

 

GBIC vs SFP

 

GBIC is larger than SFP: “GBIC” stands for “Gigabit Interface Converter” and was quite popular in the 1990s. It served as a standard way of connecting to different media like copper and fiber optic cables. In contrast, “SFP” stands for “Small Form-Factor Pluggable,” which also serves the very same purpose as GBIC. The main difference between GBIC and SFP is their size. SFP is considerably smaller than GBIC. It is half the volume of GBIC and can be configured double number of ports on the same panel. Other basic functions is the almost the same with the GBIC.

 

SFP is in prominent use while GBIC is already obsolete: The difference in size is very desirable for many people, especially for those who deal with lots of them, because it will take up a lot less space. Considering that space in a server location is quite limited, using SFP lets you put more within one rack unit than if you used GBIC. Because of this single difference, SFP rapidly gained popularity with administrators who want to maximize their space. As SFP became more popular, GBIC also fell out of favor. Nowadays, GBIC is considered to be obsolete, and you would be hard pressed to find vendors that still carry equipment that is compatible with GBIC. SFP is still widely being used nowadays but is also under pressure from newer standards like SFP+.

 

GBIC and SFP are equal in performance: Although they are different in some aspects , the GBIC and SFP are equal in performance. Both of them are used for Hot swappable to maximize uptime and simplify serviceability, Flexibility of media and interface choice on a port-by-port basis, so you can “pay as you populate” ,Robust design for enhanced reliability and supports digital optical monitoring (DOM) capability.

 

Some Modules of GBIC and SFP

 

1.1G GBIC

Gigalight GIBC (Gigabit Interface Converter) is a hot-swappable input/output device that plugs into a Gigabit Ethernet port or slot, linking the port with the network. It consists of two sections: The transmitter section incorporates a DFB laser, and the receiver section consists of a PIN photodiode integrated with a trans-impedance preamplifier (TIA). All odules satisfy class I laser safety requirements.

 

2.BIDI SFP

Gigalight BIDI SFP is for Single-Fiber Bidirectional Applications. Up to 2.67Gb/s, Distance up to 120 km. The transceiver consists of three sections: a DFB laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. The transceivers are compatible with SFP Multi-Source Agreement (MSA) and SFF-8472.

 

3.CWDM SFP

Gigalight CWDM SFP is compliant with ITU-T G.694.2. 18-Wavelength is avaiable. Up to 4Gb/s, Distance up to 80 km. The transceiver consists of three sections: a DFB laser transmitter, a APD photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements.

 

In summary, GBIC is larger than SFP. SFP is in prominent use while GBIC is already obsolete. GBIC and SFP are equal in performance.

评论

发表评论

此博客中的热门博文

Common Armored Fiber Optic Cables

  Armored fiber optic cables are often installed in a network for added mechanical protection, as they have extra reinforcing in the cable housing to prevent damage. Two types of armored fiber optic cables exist: interlocking and corrugated. Interlocking armor is an aluminum armor that is helically wrapped around the cable and found in indoor and indoor/outdoor cables. It offers ruggedness and superior crush resistance. Corrugated armor is a coated steel tape folded around the cable longitudinally. It is found in outdoor cables and offers extra mechanical and rodent protection.   The Structure of an Armored Fiber Optic Cable In basic armored fiber cable designs, the outer sleeve provides protection against wind, solvents, and abrasion. This outer sleeve is usually made of plastic such as polyethylene. The next layer between the sleeve and the inner jacket is an armoring layer of materials that are difficult to cut, chew, or bu
阅读全文

what the Differences Between FBT Splitter and PLC Splitter

  In FTTx and PON architectures, optical splitter plays an increasingly significant role to create a variety of point-to-multipoint fiber optic networks. But do you know what is a fiber optic splitter? In fact, a fiber optic splitter is a passive optical device that can split or separate an incident light beam into two or more light beams. Basically, there are two types of fiber splitter classified by their working principle: fused biconical taper splitter (FBT splitter) and planar lightwave circuit splitter (PLC splitter). You may have one question: what’s the difference between them and shall we use FBT or PLC splitter?   What Is FBT Splitter? FBT splitter is based on a traditional technology to weld several fiber together from side of the fiber. Fibers are aligned by heating for a specific location and length. Because the fused fibers are very fragile, they are protected by a glass tube made of epoxy and silica powder. And then a stainless steel tube covers the inner glass tu
阅读全文

Introduction of Optical Fiber Couplers and How Do They Work?

 What are optical fiber couplers? A fiber optic coupler can be defined as an optical component used with one or more input fibers and several output fibers in fiber optic systems. A coupler essentially puts two or more cores of fibers together to connect. The simple coupler is the fused fiber 2x2 coupler. Couplers are used as multiplexers that are resistant to certain wavelengths. A fiber output depends on the wavelength of light and the frequency of polarization. The fiber refractive index also plays a significant role in the performance. Let’s checkout how do optic couplers work to understand this better. How do fiber optic couplers work? Either fiber optic couplers separate optical signals into multiple paths or combine multiple signals in one direction. Optical signals are more complicated than electrical signals, making it more difficult to design optical couplers than their electrical copy. Unlike electrical currents, the optical signal consists of a stream of signal carriers, in
阅读全文