Using Network Simulation Platforms for Testing Fiber Optic Equipment

As the use of fiber optic equipment in communications systems continues to grow worldwide, network simulation testing has become vitally important for vendors seeking to offer their equipment for use in the field.
 
In the past, many engineers and technicians wold simply use exposed bare optical fiber spools that were sitting out on the test bench.  This practice, although usually working for a short period of time, generally leads to a number of issues that cost users both time and money.
 
 
Potential Issues of Using Exposed Fiber Spools
 
Bare optical fiber is easily damaged when not protected in the work environment
Careful handling, fiber identification, and consistent results become a challenge
Inefficient use of valuable workspace
 
Whether using standard or specialty optical fibers (carrying a significantly higher cost) and taking into account tight budget restrictions, engineers must be wary of these issues.  Fortunately, by purchasing a professional network simulation platform, users can eliminate all the above challenges, while simplifying their fiber optic test routines.
 
 
Types of Fiber Optic Network Simulation Platforms
 
Today, there are a variety of network simulation platforms available for use depending upon a user's setup preference.  Both portable enclosures for single spools as well as rack-mount enclosures for multiple-spools (and longer distances) are available.  In addition, the most useful platforms are built to exact specifications, offering a variety of optical fiber types, lengths, and connectors. Regardless of the specific type chosen, they are proven to offer better results and more efficient organization.

评论

发表评论

此博客中的热门博文

Common Armored Fiber Optic Cables

  Armored fiber optic cables are often installed in a network for added mechanical protection, as they have extra reinforcing in the cable housing to prevent damage. Two types of armored fiber optic cables exist: interlocking and corrugated. Interlocking armor is an aluminum armor that is helically wrapped around the cable and found in indoor and indoor/outdoor cables. It offers ruggedness and superior crush resistance. Corrugated armor is a coated steel tape folded around the cable longitudinally. It is found in outdoor cables and offers extra mechanical and rodent protection.   The Structure of an Armored Fiber Optic Cable In basic armored fiber cable designs, the outer sleeve provides protection against wind, solvents, and abrasion. This outer sleeve is usually made of plastic such as polyethylene. The next layer between the sleeve and the inner jacket is an armoring layer of materials that are difficult to cut, chew, or bu
阅读全文

what the Differences Between FBT Splitter and PLC Splitter

  In FTTx and PON architectures, optical splitter plays an increasingly significant role to create a variety of point-to-multipoint fiber optic networks. But do you know what is a fiber optic splitter? In fact, a fiber optic splitter is a passive optical device that can split or separate an incident light beam into two or more light beams. Basically, there are two types of fiber splitter classified by their working principle: fused biconical taper splitter (FBT splitter) and planar lightwave circuit splitter (PLC splitter). You may have one question: what’s the difference between them and shall we use FBT or PLC splitter?   What Is FBT Splitter? FBT splitter is based on a traditional technology to weld several fiber together from side of the fiber. Fibers are aligned by heating for a specific location and length. Because the fused fibers are very fragile, they are protected by a glass tube made of epoxy and silica powder. And then a stainless steel tube covers the inner glass tu
阅读全文

Introduction of Optical Fiber Couplers and How Do They Work?

 What are optical fiber couplers? A fiber optic coupler can be defined as an optical component used with one or more input fibers and several output fibers in fiber optic systems. A coupler essentially puts two or more cores of fibers together to connect. The simple coupler is the fused fiber 2x2 coupler. Couplers are used as multiplexers that are resistant to certain wavelengths. A fiber output depends on the wavelength of light and the frequency of polarization. The fiber refractive index also plays a significant role in the performance. Let’s checkout how do optic couplers work to understand this better. How do fiber optic couplers work? Either fiber optic couplers separate optical signals into multiple paths or combine multiple signals in one direction. Optical signals are more complicated than electrical signals, making it more difficult to design optical couplers than their electrical copy. Unlike electrical currents, the optical signal consists of a stream of signal carriers, in
阅读全文