Understand 10G SFP+ Transceiver From the Perspective of Connecting Cable Types

SFP+ transceiver is very popular in many data center and enterprise servers network application. As we all known, 10G SFP+ transceivers have a big branch family. Different SFP+ transceivers can provide a wide variety of connectivity options. There are several approaches for us to understand 10G SFP+ transceivers family. For example, with the compliance to different 10G Ethernet standard, we can classify transceivers as 10GBase-SR, 10GBase-LR, 10GBase-ER, 10GBase-ZR etc. Or viewing from the port type, we can see the difference between the SFP+ transceiver configured with duplex LC connector or a RJ-45 connector. But there is another approach we can understand and distinguish SFP+ transceivers. And That is waht I am going to talk about: the Connecting Cable Types.
 
1.Copper Cable
 
10GBase-T SFP+ is a transceiver configured with a RJ-45 port, which means that it uses copper cable to provide connections of 10G transmission speed. Cat 6, cat 6a or cat 7 copper cable is required in this situation. As for the transmission distance, it only supports a link length of up to 30 meters. 10GBase-T SFP+ transceiver is a suitable one for very short distances and offer a cost-effective way to connect within racks and across adjacent racks.
 
2.Multi-mode fiber
 
10GBase-SR SFP+ is the transceiver using multi-mode fiber to transfer data in SFP+ family. It is using 850nm wavelength. 10GBaase-SR transceiver supports a link length of 26m on standard Fiber Distributed Data Interface (FDDI)-grade multi-mode fiber. Using OM3 multi-mode fiber, up to 300m link lengths are possible. Using OM4 multi-mode, up to 400m link lengths are possible.
 
3.Both single-mode fiber & multi-mode fiber available
 
10GBase-LX4 and 10GBase-LRM transceiver is using both single-mode fiber and multi-mode fiber to transfer data. 10GBase-LX4 transceiver uses CWDM technology to divide 12.5 GB/s data streams into four 3.125 GB/s data streams that are propagated in optical fibers. And due to the 8B/10B encoding, the effective data flow is 10 GB/s. But 10GBase-LX4 transceiver has the disadvantages of high cost and much power consumption. Therefore,it has a very narrow market. 10GBase-LRM transceiver is a replacement of 10GBASE-LX4 transceiver, allowing distances up to 220 meters. It supports link lengths of 220m on standard Fiber Distributed Data Interface (FDDI) grade Multi-mode Fiber. There’s one thing to notice. To make sure that specifications are met over FDDI-grade, OM1 and OM2 fibers, the transceiver should be coupled through a mode conditioning patch cord. No mode conditioning patch cord is required for applications over OM3 or OM4. Besides, using standard single-mode fiber, 10GBase-LRM module also can support a link length of 300m. In general, multi-mode fiber connecting is the most application scenario for 10GBase-LRM transceiver.
 
4.Single-mode fiber
 
There are three basic kinds of transceivers using single-mode fibers to transfer data in SFP+ family: 10GBase-LR, 10GBase-ER, 10GBase-ZR. With carrying different wavelength, every transceiver can reach up different distances. For example, 10GBase-LR transceiver can support a link length of up to 10 kilometers. 10GBase-ER transceiver can support a link length of up to 40 kilometers. 10GBase-ZR transceiver can support a link length of up to 80 kilometers. Due to a superior transmission range and usually a long length of optic fiber cable, using these three transceivers means much higher cost. So these three kinds of transceivers are the better option where budget is not a constraint, or when the demand for long cable system.
 
Conclusion
 
From the perspective of connecting cable types, we will have a more clear image of 10G SFP+ transceiver. In fact, we can easily draw the conclusion: different cable types constrain the transmission distance of the 10G SFP+ transceiver. The range of transmission distance is an important consideration factor of selecting SFP+ transceivers. Below is a detailed table for 10G SFP+ transceivers offered by 10Gtek, which gives you more reference information.

评论

发表评论

此博客中的热门博文

Common Armored Fiber Optic Cables

  Armored fiber optic cables are often installed in a network for added mechanical protection, as they have extra reinforcing in the cable housing to prevent damage. Two types of armored fiber optic cables exist: interlocking and corrugated. Interlocking armor is an aluminum armor that is helically wrapped around the cable and found in indoor and indoor/outdoor cables. It offers ruggedness and superior crush resistance. Corrugated armor is a coated steel tape folded around the cable longitudinally. It is found in outdoor cables and offers extra mechanical and rodent protection.   The Structure of an Armored Fiber Optic Cable In basic armored fiber cable designs, the outer sleeve provides protection against wind, solvents, and abrasion. This outer sleeve is usually made of plastic such as polyethylene. The next layer between the sleeve and the inner jacket is an armoring layer of materials that are difficult to cut, chew, or bu
阅读全文

what the Differences Between FBT Splitter and PLC Splitter

  In FTTx and PON architectures, optical splitter plays an increasingly significant role to create a variety of point-to-multipoint fiber optic networks. But do you know what is a fiber optic splitter? In fact, a fiber optic splitter is a passive optical device that can split or separate an incident light beam into two or more light beams. Basically, there are two types of fiber splitter classified by their working principle: fused biconical taper splitter (FBT splitter) and planar lightwave circuit splitter (PLC splitter). You may have one question: what’s the difference between them and shall we use FBT or PLC splitter?   What Is FBT Splitter? FBT splitter is based on a traditional technology to weld several fiber together from side of the fiber. Fibers are aligned by heating for a specific location and length. Because the fused fibers are very fragile, they are protected by a glass tube made of epoxy and silica powder. And then a stainless steel tube covers the inner glass tu
阅读全文

Introduction of Optical Fiber Couplers and How Do They Work?

 What are optical fiber couplers? A fiber optic coupler can be defined as an optical component used with one or more input fibers and several output fibers in fiber optic systems. A coupler essentially puts two or more cores of fibers together to connect. The simple coupler is the fused fiber 2x2 coupler. Couplers are used as multiplexers that are resistant to certain wavelengths. A fiber output depends on the wavelength of light and the frequency of polarization. The fiber refractive index also plays a significant role in the performance. Let’s checkout how do optic couplers work to understand this better. How do fiber optic couplers work? Either fiber optic couplers separate optical signals into multiple paths or combine multiple signals in one direction. Optical signals are more complicated than electrical signals, making it more difficult to design optical couplers than their electrical copy. Unlike electrical currents, the optical signal consists of a stream of signal carriers, in
阅读全文