OTDRs Never Go Out of Style

by www.fiber-mart.com
The optical time domain reflectometer (OTDR) is now thirty-six years old and aging gracefully.
While fiber optic cables had been installed in North America since 1977, one major concern was and still is: how do we accurately locate a fault? This is the major reason that OTDRs exist. Fortunately, as the communications industry has matured, so has the OTDR.
Why Use It?
Today’s OTDRs address quality control (QC), quality assurance (QA) for optical fibers and cables as well as acceptance testing and troubleshooting installed links in the field. Fiber and cable manufacturers make use of the OTDR’s QC features to perform attenuation and length measurements at a variety of wavelengths based on the type of fiber being tested. These tests are more common in factory settings, often in conjunction with optical switches to allow quick and efficient testing of large numbers of optical fibers.
As fiber counts in cables have increased, the level of automation has paralleled this growth, providing opportunities to increase the OTDR’s value to service providers by incorporating optical switches to monitor live and dark fibers.
The OTDR’s dominant role for service providers and contractors is in QA roles — which is far more extensive and complex than QC testing. Modern OTDRs must address multiple tests and measurement tasks focused mostly around attenuation, but as the critical nature of reflections and their impact on system performance increase, the OTDR is essential for these measurements. It must also be able to perform length measurements for approximate physical locations of events such as splices, fiber stress points (macrobends and microbends), passive devices such as splitters and fiber breaks.
The OTDR is also the easiest instrument to use to measure component reflectance and span optical return loss (ORL) values. The importance of reflection testing cannot be overstated. Reflectance and ORL values are critical for achieving desired bit error rates, as Fresnel reflections from connectors can disrupt the efficient operation of the laser diodes in fiber optic transmitters.
Transmitter manufacturers define the quality of signal based on the level of attenuation and the ORL values for fiber spans. A single contaminated connector can affect the component reflectance, which in turn affects the span’s ORL value. Component reflectance and ORL testing should be requirements for all end-to-end OTDR tests on single-mode fibers.
New Challenges
As system data rates increase, the need for fiber characterization (FC) continues to challenge the industry. In some cases where optical amplifiers are installed, identifying, locating and re-terminating high-loss connectors and splices is required due to higher reflection and attenuation issues with legacy terminations. Older terminations were limited by two issues: fiber tolerances and the type of polish on the connectors. Single-mode fiber tolerances for core, cladding dimensions, ovality and concentricity continue to improve. Older fibers simply have more opportunity for higher loss connections.
Many legacy connectors had either flat polishes or original physical contact (PC) polishes with reflectance levels of 30-40 dB. Even the improved super PC (SPC) polishes of the late 1990s with most ST and SC connectors have much greater reflectance levels (45 dB) than the 50-65 dB reflectance levels for today’s ultra physical contact (UPC) and angled physical contact (APC) polishes.
Identifying high loss splices and connectors as well as high reflectance connectors can easily be performed by the OTDR. However if the readings are too high to meet today’s standards or system performance levels, these older terminations may have to be replaced with UPC or APC connectors.
The Chicken and the Egg Question
Is the technology driving the development of improved OTDRs? Or are the users driving their needs? Each group will have their own perspectives. The manufacturers have done a great job at developing smaller, lighter, less costly instruments. They have done so while improving technical requirements: greater dynamic range options, shorter and longer laser pulse widths, increased waveform and data storage, longer battery life, and interfaces for exporting data via Bluetooth or Wi-Fi. At the same time maintaining an instrument that is easy to operate.
OTDRs have also grown from AC powered mainframe OTDRs to handheld mini OTDRs.
The development of modular OTDR platforms allows for greater flexibility to add various optical tools such as power meters, visual fault locators, inspection scopes or other modules for advanced fiber testing, wifi or copper testing.

评论

发表评论

此博客中的热门博文

Common Armored Fiber Optic Cables

  Armored fiber optic cables are often installed in a network for added mechanical protection, as they have extra reinforcing in the cable housing to prevent damage. Two types of armored fiber optic cables exist: interlocking and corrugated. Interlocking armor is an aluminum armor that is helically wrapped around the cable and found in indoor and indoor/outdoor cables. It offers ruggedness and superior crush resistance. Corrugated armor is a coated steel tape folded around the cable longitudinally. It is found in outdoor cables and offers extra mechanical and rodent protection.   The Structure of an Armored Fiber Optic Cable In basic armored fiber cable designs, the outer sleeve provides protection against wind, solvents, and abrasion. This outer sleeve is usually made of plastic such as polyethylene. The next layer between the sleeve and the inner jacket is an armoring layer of materials that are difficult to cut, chew, or bu
阅读全文

what the Differences Between FBT Splitter and PLC Splitter

  In FTTx and PON architectures, optical splitter plays an increasingly significant role to create a variety of point-to-multipoint fiber optic networks. But do you know what is a fiber optic splitter? In fact, a fiber optic splitter is a passive optical device that can split or separate an incident light beam into two or more light beams. Basically, there are two types of fiber splitter classified by their working principle: fused biconical taper splitter (FBT splitter) and planar lightwave circuit splitter (PLC splitter). You may have one question: what’s the difference between them and shall we use FBT or PLC splitter?   What Is FBT Splitter? FBT splitter is based on a traditional technology to weld several fiber together from side of the fiber. Fibers are aligned by heating for a specific location and length. Because the fused fibers are very fragile, they are protected by a glass tube made of epoxy and silica powder. And then a stainless steel tube covers the inner glass tu
阅读全文

Introduction of Optical Fiber Couplers and How Do They Work?

 What are optical fiber couplers? A fiber optic coupler can be defined as an optical component used with one or more input fibers and several output fibers in fiber optic systems. A coupler essentially puts two or more cores of fibers together to connect. The simple coupler is the fused fiber 2x2 coupler. Couplers are used as multiplexers that are resistant to certain wavelengths. A fiber output depends on the wavelength of light and the frequency of polarization. The fiber refractive index also plays a significant role in the performance. Let’s checkout how do optic couplers work to understand this better. How do fiber optic couplers work? Either fiber optic couplers separate optical signals into multiple paths or combine multiple signals in one direction. Optical signals are more complicated than electrical signals, making it more difficult to design optical couplers than their electrical copy. Unlike electrical currents, the optical signal consists of a stream of signal carriers, in
阅读全文