What’s the difference between copper cable and fiber optic cable and what could it mean for your business?

by Fiber-MART.COM
When comparing traditional copper cable with fiber optic cable, it is hard to be impartial, because the facts speak so clearly for themselves. Fiber optic cable is superior to copper cable in almost every way imaginable.
 
It is much faster than copper cable, carries much higher bandwidth, has less interference and is lighter, stronger and more durable as well. While copper has been a reliable medium in the past, fiber optic cable is undoubtedly the future and this article takes a closer look at each of it’s many advantages.
 
How it works
 
While traditional copper wire transmits data by electrical impulses, fiber optic cable is made from fine hair-like glass fibers, which carry light impulses transmitted by an LED or laser. This infrared light bounces along the insides of the fibers at blistering speeds and when the signal reaches the other end of the fibers, an optical receiver then converts it back into data.
 
Speed
 
Speed is the amount of data that you can transmit per unit of time and when it comes to speed, fiber optic cables win hands down over copper cables. While traditional copper lines can carry roughly 3,000 phone calls at one time, fiber optic cables used in a similar system could carry around 31,000 calls.
 
Bandwidth
 
The reason fiber optic cable is faster is because of the extremely high frequency ranges it is able to carry, whereas signal strength diminishes at high frequencies with copper wire. Fiber optic cable can carry more than a thousand times the bandwidth of copper cable and go more than one hundred times further as well.
 
Interference
 
Fiber optic cable is also much less susceptible to noise and electromagnetic interference than copper wire. For example, over a distance of two kilometres, copper wire would experience a great deal of degradation in quality, while there would be virtually none over the same distance using fiber optic cable.
 
Size, weight & strength
 
Fiber optic cable is much thinner and lighter than copper cable, meaning it can be used more efficiently in confined underground conduits. It is also much stronger, with eight times the pulling tension of copper wire and it has strength members and stiffeners that make it much harder to damage or kink.
 
Durability
 
Fiber optic cable is extremely durable and provides very reliable data transmission. It does not conduct electricity because it’s core is made of glass, it is impervious to radio frequency interference, it can be immersed in water without effect and it can be used in much harsher conditions, as it is less susceptible to fluctuations in temperature than copper cable.
 
Security
 
Fiber optic cable also keeps data more secure. It does not radiate signals and is impossible to tap without your knowledge, because the system will fail if is tapped, due to the fact that it will leak light. It is also more secure because all the hardware and electronics can be stored in one central location, unlike copper systems, where wiring closets are required to be placed in various locations.
 
Cost
 
Possibly the one area where copper cable has the advantage over fiber is the price. While fiber optic cable is not more expensive than copper cable, the electronics needed to support it are more expensive. This is only a short term advantage, however, as fiber optic cable actually comes out cheaper in the long term. This is when you take into account that fiber optic systems are getting cheaper all the time due to market forces, they require less hardware, need less ongoing maintenance and they experience much less down-time than copper systems.
 
Power transmission
 
As well as data transmission, fiber optic cable is also the preferred means of transmitting power. This is because it is non-conductive and low voltage, so it is much safer to install and maintain and less hazardous when used in urban environments. It also doesn’t attract lightning as copper cable can do and is much lighter and much more durable.
 
Future
 
While the difference between copper and fiber optic cables is already akin to the difference between the telegraph and the telephone, the future will see fiber optic technology improve exponentially.
 
Fiber optic systems are already being used in the backbone applications of most major companies because of their reliability and upgradability and in the near future, a technique known as wavelength multiplexing will increase their capacity even more, by allowing multiple channels to run on a single fiber strand.
 
The development of better quality glass will also allow signals to travel even further without experiencing degradation. All up, it is fairly safe to assume that, just as digital telephony has done in the past, so fiber optic technology will put yet another nail in the coffin of the traditional copper wire.

    评论

    发表评论

    此博客中的热门博文

    Common Armored Fiber Optic Cables

      Armored fiber optic cables are often installed in a network for added mechanical protection, as they have extra reinforcing in the cable housing to prevent damage. Two types of armored fiber optic cables exist: interlocking and corrugated. Interlocking armor is an aluminum armor that is helically wrapped around the cable and found in indoor and indoor/outdoor cables. It offers ruggedness and superior crush resistance. Corrugated armor is a coated steel tape folded around the cable longitudinally. It is found in outdoor cables and offers extra mechanical and rodent protection.   The Structure of an Armored Fiber Optic Cable In basic armored fiber cable designs, the outer sleeve provides protection against wind, solvents, and abrasion. This outer sleeve is usually made of plastic such as polyethylene. The next layer between the sleeve and the inner jacket is an armoring layer of materials that are difficult to cut, chew, or bu
    阅读全文

    what the Differences Between FBT Splitter and PLC Splitter

      In FTTx and PON architectures, optical splitter plays an increasingly significant role to create a variety of point-to-multipoint fiber optic networks. But do you know what is a fiber optic splitter? In fact, a fiber optic splitter is a passive optical device that can split or separate an incident light beam into two or more light beams. Basically, there are two types of fiber splitter classified by their working principle: fused biconical taper splitter (FBT splitter) and planar lightwave circuit splitter (PLC splitter). You may have one question: what’s the difference between them and shall we use FBT or PLC splitter?   What Is FBT Splitter? FBT splitter is based on a traditional technology to weld several fiber together from side of the fiber. Fibers are aligned by heating for a specific location and length. Because the fused fibers are very fragile, they are protected by a glass tube made of epoxy and silica powder. And then a stainless steel tube covers the inner glass tu
    阅读全文

    Introduction of Optical Fiber Couplers and How Do They Work?

     What are optical fiber couplers? A fiber optic coupler can be defined as an optical component used with one or more input fibers and several output fibers in fiber optic systems. A coupler essentially puts two or more cores of fibers together to connect. The simple coupler is the fused fiber 2x2 coupler. Couplers are used as multiplexers that are resistant to certain wavelengths. A fiber output depends on the wavelength of light and the frequency of polarization. The fiber refractive index also plays a significant role in the performance. Let’s checkout how do optic couplers work to understand this better. How do fiber optic couplers work? Either fiber optic couplers separate optical signals into multiple paths or combine multiple signals in one direction. Optical signals are more complicated than electrical signals, making it more difficult to design optical couplers than their electrical copy. Unlike electrical currents, the optical signal consists of a stream of signal carriers, in
    阅读全文